GP-XD1200 adopts the latest high pass customized chip optimization algorithm, which has strong anti-interference ability, high bandwidth, high standby capacity and strong stability. At the same time, it supports the integrated mode of fat and thin, graphical fast configuration mode, typical functions: access signal threshold limit, multi virtual SSID, maximum client number limit, VLAN, QoS speed limit rules, WDS, national and regional settings, advanced RF mode, etc.
GP-AG500 access product is a wireless access device based on IEEE 802.11ac technology independently developed by Guangpu technology. The utility model has the advantages of rich functions, high performance and high reliability, to meet the needs of WLAN wireless applications in industrial scenarios. GP-AG500 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. It can work simultaneously in 2.4GHz and 5GHz frequency band when working in AP mode, and supports IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n and 802.11ac five modes, with the highest access rate of 733Mbps. Supports 802.11b/g/n and 802.11a/n/ac standards Client-based millisecond-level fast roaming Diversified access authentication methods MAC address cloning
The GP-AG1000 wireless access point product is a wireless access device based on IEEE 802.11ac technology independently developed by GPSENKE technology. The utility model has the advantages of rich functions, high performance and high reliability, which can meet the requirements of WLAN wireless application in industrial scenes. The GP-AG1000 is suitable for AGV, mobile access, wireless coverage, IoT and other related industrial automation scenarios. Operating in AP mode, it can operate in the 2.4GHz and 5GHz bands simultaneously. Supports four modes: IEEE 802.11a, IEEE802.11 b, IE 802.21g, IEE 8021n and 802.8ac. The highest access rate is 1167 Mbps.
GP-AP1800AX-FS outdoor Access Point product is based on IEEE802.11ax technology independently developed by GPSENKE. GP-AP1800AX-FS support 802.11b/g/n/ac/ax standard, Dual-frequency maximum bandwidth up to 1775Mbps. Can widely used in medical/ treatment/ schools/ underground/ parks/ pipecorridors/ scenicspots/ amusement and other outdoor wireless network coverage. GP-AP1800AX-FS used the newest custom chip optimization algorithm. It have high anti-interference ability, high bandwidth, high standby, strong stability, and support fat and thin integrated mode. The professional integrated outdoor design with IP67 water-proof and wide temperature working ability are very convenient for outdoor installation. 802.11 b / g / n / ac / ax standard Diversified access authentication Support 802.11k / v / r protocol Support 2 Gigabit LAN + 1 SFP optical slot IP 67 protection level
The AX5400 router supports the latest IEEE802.11ax protocol standards, which transforms between Ethernet wired data and local wireless LAN data. The MU-MIMO and Beamforming functions guarantee network rate and signal quality for multiple users. In addition to the high-performance WiFi6, the devices also support firewall, QoS, maintenance and management, and other functions to provide stable services for home and small business users. Support Wi-Fi 6 Support VPN Remote management Support AX5400 rate Support MU-MIMO Support MESH networking
The AX5400 router supports the latest IEEE802.11ax protocol standards, which transforms between Ethernet wired data and local wireless LAN data. The MU-MIMO and Beamforming functions guarantee network rate and signal quality for multiple users. In addition to the high-performance WiFi6, the devices also support firewall, QoS, maintenance and management, and other functions to provide stable services for home and small business users. Support Wi-Fi 6 Support VPN Remote management Support AX5400 rate Support MU-MIMO Support MESH networking
The AC1200 Wireless Router supports data rates up to 1200 Mbps in 2.4 GHz band & 5 GHz band, and is compatible with IEEE 802.11g/b (WiFi), IEEE802.11n (WiFi 4) & IEEE802.11ac (WiFi 6) wireless devices. Featuring an omni directional antenna design with transmission power up to 100mW, the AC1200 combines the router, wireless access point, switch & firewall functions in a single unit,providing a convenient yet comprehensive network management solution. Complies with IEEE802.11n, IEEE802.11ac, IEEE802.11b/g, IEEE802.3i, IEEE802.3u Supports 64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security Transmission power up to 100mW, which can effectively improve the Wi-Fi coverage Supports MAC/IP filtering and URL blocking High speed data rate up to 1200Mbps Supports DHCP server and Anti-Dos firewall Supports Virtual Server and DMZ Web user interface (remote configuration), firmware upgradeable
GP-AX1800 is a high-speed ,high performance wireless router that provides 2.4G and 5.8GHz dual frequency wireless services.GP-AX1800 support WiFi6 and provid a higher speed & stable wireless access environment for users. 2.4GHz(674Mbps) & 5GHz(1200Mbps) Maximum Wireless Throughput Support Watchdog Hardware Function Automatically Restored Abnormal Special Coating for heat dissipation Product Size:197.7mm*144.2mm*32.4mm Maximum power consumption: 15W Highest Rate:2.4G 574Mbps 5.8G: 1200Mbp
The 100G QSFP28 SR4 optical transceiver integrates the transmit and receive path onto one module. It converts parallel electrical input signals into parallel optical signals, by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The transmitter module accepts electrical input signals compatible with Common Mode Logic (CML) levels. All input data signals are differential and internally terminated. The receiver module converts parallel optical input signals via a photo detector array into parallel electrical output signals. The reCML) levels. All data signals are differential and support a data rates up to 27.9525Gb/s per channel.ceiver module outputs electrical signals are also voltage compatible with Common Mode LogicOn This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface. Features: MTP/MP0 optical connector Single +3.3V power supply Hot-pluggable QSFP28 MSA form factor Up to 100m OM4 MMF Distance 4x28G Electrical Serial Interface (CEI-28G-VSR) AC coupling of CML signals Low power dissipation(Max:3.5W) Built in digital diagnostic function Operating case temperature range:0 to 70 Compliant with 100GBASE-SR4 I2C Communication Interface Applications: 100GBASE-SR4 Infiniband QDR/DDR/SDR 100G Datacom connections Standards: Compliant with IEEE 802.3ba Compliant with QSFP28 MSA hardware specifications Compliant with RoHS
SSK SHU011 USB 2.0 HUB power splitter with 7 USB Ports rechargeable converter extender, SHU011 USB2.0 is HUB extender with independent power supply, and 7 interfaces can be used simultaneously. SHU011 USB2.0 can plug and play 1.5M, extented 7 USB interfaces and almost all USB product is compatible, support 99% USB interfaces Functions: Extended 7 USB2.0 ports, each port can support 5m long extension wire Indicater light controls port and power, easy to use With overcurrent detection and protection Fully compatible with USB 1.1 and 2.0 devices Transmission rate of USB2.0 device file up to 480Mbps No driver required, plug and play, all ports support hot plug Low power consumption and small heat Equipped with power adapter and USB cable
MF21 4G LTE MIFI router, also known as 4G MIFI device, MIFI 4G hotspots, and LTE MIFI router can be used to convert Wi-Fi signals and access the Internet on a variety of devices(mobile phones, laptops, tablets, etc.). The 4G LTE MIFI router is a pocket-sized plug-and-play modem, no need for extra software support, easy to carry around, operate and deploy.
UF21 4G LTE UFi dongle is a brand new pocket-size UFi dongle that can tap into a 4G or 5G cellular network to achieve a Cat 4 high-speed wireless broadband hotspot. Designed with a universal USB port to be externally powered through a computer/laptop/power bank/car charger, the UFi dongle is plug and play, portable and affordable, easy to carry, and convenient to use. Wireless devices including mobile phones, laptops, tablets, and other smart devices, can access the device simultaneously.
Portability 7-IN-1 USB-C to USB3.0 2+HDMI 4K60Hz +PD 100W +SD/TF 3.0 Adapter 1. Interface: USB-C Data+USB3.0 2+SD+TF+HDMI+USB-C PD+RJ45 2. USB3.0: Support USB3.0 5Gbps speed tramsmission(downward compatible with USB2.0 and USB1.1) 3. SD/TF(Micro SD): Support SD, Micro SD, SD HC, SD XC and other memory cards, support 2T capacity and 104Mb/s speed 4. 4K HDMI: Support UHD 4K@60Hz video output 5. USB-C PD: Support 5V/9V/12V/14.5V/20V 5A Max 6. RJ45: Support 10/100/1000 Mbs(base-T) LAN. LED light for indication. 7. Matrtial: Aluminum Alloy Shell and TPE Wire 8. Colour Space Grey+Copper
40G QSFP ER4 optical transceiver module, support 40Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.
25G SFP28 optical transceiver module, support 25Gb/s and SR up to 100 m transmission, LR 25G SFP28 up to 10 km transmission, and ER 25G SFP28 up to 40 km transmission, it works in high-speed IDC connection solutions, and so on.
Up to 4X10Gbps Data rate.Max link up to 100M on OM3 cable, and 150m on OM4 cable.High reliability 850nm VCSEL technology.Electrically hot-pluggable.Low power consumption.Low EMI design.
Up to 27.952Gbps Data rate per channel.Max link up to 100M on OM3 cable, and 150m on OM4 cable.High reliability 850nm VCSEL technology.Electrically hot-pluggable.Low power consumption.Low EMI design.
Optical Transmission Network System OTN1000 With the rapid development of the Internet, the bandwidth pressure caused by the spurt growth of data traffic makes it imperative to introduce a 100G system into the transmission network. Therefore, Fiberwdm has introduced a new generation of high-capacity, long-distance 100G wavelength division transmission Equipment OTN1000 series products. The product uses advanced transmission technology and high integration technology to support single-channel transmission rate from 100Mbps to 100Gbps, and provides wide bandwidth, large capacity and fully transparent transmission for 200Gbps and 400Gbps expansion, enabling smooth upgrade of capacity. It provides a stable platform for multi-service operation and future network upgrade and expansion. It is widely used in operators, broadcasting, IDC, finance, government, cloud network, big data and other industries.
10G SFP+ optical transceiver module, support 10Gb/s and up to 100 km transmission, including: SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on.
Features Supports 9.95 to 11.3Gb/s bit rates Hot-Pluggable Duplex LC connector 1310nmDFBtransmitter, PIN photo-detector SMF links up to10km 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface Power Supply :+3.3V Power consumption
