Lelystad Flexible Packaging Bags Suppliers and Manufacturers

Safetybags by DaklaPack Secondary leak proof packaging - 100% leak and tamper proof. Available in various sizes, suitable to hold a wide range of primary containers, such as blood tubes, specimen containers and swabs. The pouches are easy to close. They are sequentially numbered and incorporate a tamper-evident seal to ensure ease of identification and security throughout the chain of custody. The pouch is made of strong transparent polyethylene, and is guaranteed to keep liquid inside. Easy to close, simply removing the backing strip and applying even pressure across the strip, the pouch is then hermetically sealed. In combination with the transport blister, the PolyMed mailing envelope and sufficient absorbent material, this composition complies with the packaging regulations (P650 and P959). We would be happy to quote you for various formats and for printing, on request. UN3373 Standard â?? Key Requirements The P650 packaging instructions for liquid substances state:- The primary receptacle(s) shall be leak proof and must not contain more than 1L liquid, and not contain more than 1kg solid. The secondary packaging shall be leak proof for liquids; (DaklaPack's Safetybags) If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them; (DaklaPack's Absorbing sheets + tube holders) If liquid, absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging; The outer packaging must be rigid and must not contain more than 4L liquid or 4kg solid. One surface of the outer packaging must measure at least 100mm x 100mm (DaklaPack's boxes and shipping solutions are fully conform if there is any doubt as to whether or not residual liquid may be present in the primary receptacle during transport, then a packaging suitable for liquids, including absorbent materials, must be used.

100% leak proof, tamperproof and true 95kpa meets DOT and IATA requirements. We at DaklaPack recently designed and patented our own 95kpa Safetybags�® and have had them fully certified by the BVI. DaklaPackâ??s 95kPa transport bags are ideal to use as a secondary watertight receptacle in accordance with DOT and IATA regulations for shipping Biological Substances. DOT and IATA shipping regulations require that UN3373 Biological Substance, Category B specimens are transported in either a primary container or secondary packaging that has passed the 95kPa pressure differential test. Custom sizes and solutions can be made available - contact us for expert advise.

RigidSafetybag - combining 3 packaging elements into 1 & simplifying the packing process. The patented RigidSafetybag by DaklaPack consists of a 100% leak and tamper-proof Safetybag, a blister like tube holder surrounded with sufficient absorbing material to fully absorb any leaked content from the primary receptacle during the unlikely event of a leakage. Due to the rigid internal component, the filled and sealed RigidSafetybag can simply be entered into a fully labelled UN3373 envelope / box and sent to the receiver. Save time effort and money using this simple solution which is fully labelled with usage instruction and provides 100% tamper evidence due to its destructive seal and tamper text in the side seals.

Order number: 464300 External length: 165 mm External width: 130 mm Internal length: 150 mm Internal width: 100 mm Material: PET-NY-PE Thickness: 160 mu Closure: Security tape P620: Yes P650: Yes UN3373: Yes Air Transport: Yes Road Transport: Yes

For efficient and sustainable packaging of food and non-food, our new flat bags are the ideal choice. Available in fresh and popular colours such as; pink, light green, light grey and white. All bags com with a modern and stylish matt finish. Due to the material composition, these flat bags are fully recyclable and have an excellent barrier. They are very suitable for powders, sports supplements, pills, seeds, sweets, jewellery, creams, beads or to send samples to your customers. There is a choice of two sizes; 70mm x 110mm and 80mm x 130mm and they are very functional to use. The tearnotches (notches) allow the user to open them easily. All sizes and colours are available both with and without grip closure. Request a free sample or contact us to enquire about the possibilities of printing them and producing them completely customized for you. Standard colors: grey - pink - green - white Standard sizes: 70 x 110 mm - 80 x 130 mm Tailor made and printing possible from 10.000 pieces

The first fully recyclable shaped spouted pouch available on the market. Made entirely of a mono material (low density polyethylene with EVOH barrier properties) these pouches are 100% recyclable under the code 4 recycle code (most supermarket and recycle centres offer code 4 drop of points) The pouches are ideal for single use refills of for example; Cosmetics - Coffee scrubs, Dense soaps, gels, Shampoo, Conditioner, Shower gel, Concentrate for products such as (add water to mix) Soap / Detergents - Fabric softener, Car cleaning products, Screen washer fluid, Meal kit sauces / pasta. The pouches are pre-formed and can be filled by the opening on the top edge and sealed using conventional heat sealers â?? the end user can easily access the product by removing the tip of the shaped pouch & easily dose out through the created opening. Available in 5 formats â?? and from just 100 pieces per size. We can also provide you with a fully customized version â?? with full colour printing & custom format from just 10,000 pieces per size. Standard color: transparent Standard sizes: 50 ML - 100 ML - 250 ML - 330 ML - 500 ML - 1000 ML

DaklaPack - IV UV Protection bags Protect medication from harmful UV light! DaklaPackâ?? s IV UV Protection bags are ideal for protecting IV Infusions, medications, and even nutritional bags against harmful ultraviolet light. Ultraviolet light can cause oxidation, hydrolysis, and loss of potency to sensitive medications. Simply place the IV bag (even bottles, piggyback container & syringes) inside of the IV UV Protection bag to ensure medication potency. The amber colouration protects against UV light whilst offering enough transparency to check fluid levels & flow rates. available in 2 sizes - 135mm x 250mm + 200mm x 400mm and made from a strong 120micron Polyethylene. â?¢ Perfect for cytostatic iv bags & nutrition bags. â?¢ Manufactured from a strong ultraviolet inhabitant polyethylene â?¢ Tested from wavelength 500nm to 320nm with max 5.36% and min 0.15% across the spectrum â?¢ Fully evaluated by SGS and test reports are readily available with full wavelength transmittance curve. We can also provide you with custom sized IV UV protector bags, with a completely custom print, ideal for private health sector organisations. Contact us for more information.

In addition to our standard range of Spoutbags, we have the possibility to produce tailor made pouches, supplied on rails with end clips, allowing you to fill larger quantities effortlessly. The Spoutbags on rail system also allows machine operators to enter multiple pouches into the filling machine without having to manually handle each and every pouch, so the operator can focus on the actual filling process instead of manual insertion. Our Spoutbags on rail system (including caps) integrates flawlessly with existing filling machinery currently available in the market. The pouches are suitable for pasteurization and sterilization as well as being suitable for both Food and Non-Food applications. We have the possibility to produce tailor made pouches, supplied on rails with end clips, allowing you to fill larger quantities effortlessly. The Spoutbags on rail system also allows machine operators to enter multiple pouches into the filling machine without having to manually handle each and every pouch, so the operator can focus on the actual filling process instead of manual insertion. Our Spoutbags on rail system (including caps) integrates flawlessly with existing filling machinery currently available in the market. The pouches are suitable for pasteurization and sterilization as well as being suitable for both Food and Non-Food applications. Standard color: silver Standard content: 70 ML - 90 ML - 150 ML - 200 ML Taylor made and printing possible from 10.000 pieces

Our new and exciting range of side gusset pouches have finally arrived, fresh out of the production plant. Perhaps just as fresh as the product you wish to pack into them. Easy to fill and easy to seal, this fantastic range also feels great in the hand. Benefit now from high quality packaging with great barrier properties. Keep your products fresh for longer and keep your customers satisfied. We have 2 types available with valve and without valve. Why a valve you ask? A valve allows for internal gasses to escape from the packaging but allows no air to enter. Perfect for roasted coffee's where the expelled gasses from the beans dampen the flavor. Standard colors: Black - Gold - Silver - Brown Standard content: 250 ML - 500 ML - 1000 ML Taylor made and printing possible from 10.000 pieces

BIOHAZARD - Specimen & Internal Transport bags. DaklaPacks range of BIOHAZARD specimen bags provide a solution for the safe storage of medical specimens. These bags have a high quality double grip closure and a separate document compartment on the back. In addition these specimen bags have a writing panel in the front which allows you to easily indicate whether the content should be frozen, refrigerated or kept at room temperature. Perfect for internal transport of when put inside a Safetybag to comply with ADR or IATA regulations. Cant find the size you are looking for, or require a bespoke item with your own print? Contact us today or fill in the contact form.

DaklaPack further expands its range of flexible products and spills on into the bag-in-box world! A rangle of bags in both metalized and non metalized materials along with a range of display boxes and handy filling equipment to allow you to fill at home, kitchen or filling rooms with ease! Suitable for a large range of applications such as; beverages, chemical fluids, paints, solvents, inks, pigments, fertilizers and liquid foods + much more. Benefits of DaklaPack's bag-in-box product range: Consumer friendly dispensing, Ascetic filling process, Reduced c02 footprint compared to traditional rigid containers, Transport and storage savings, Flat surfaces to maximize branding options, Part recyclable (paper) reduced amount of plastic waste + no spill, Extended product shelf life! Standard color: brown Standard content: 500 ML - 1000 ML - 2500 ML - 5000 ML - 10.000 ML

Both the foil and grip closure are produced from 100% PE with an additional barrier coating we refer to this material as monopolymer. After use the used pouches can be placed into plastic waste collection bins / collection points and 100% recycled. The pouches are re-sealable with the integrated gip closure, it is also possible to seal the pouches closed using conventional heat sealers and due to the tear notches â?? easily opened by the consumer. These pouches are suitable for both food and non-food applications and due to the additional barrier offer increased shelf life. Available in 5 formats and to order from just 100 pieces. Standard colors: transparent - grey - white Standard content: 150 ML - 250 ML - 400 ML - 700 ML - 1000 ML Tailor made and printing possible from 10.000 pieces