Dipropylene glycol finds many uses as a plasticizer, an intermediate in industrial chemical reactions, as a polymerization initiator or monomer, and as a solvent. Its low toxicity and solvent properties make it an ideal additive for perfumes and skin and hair care products. It is also a common ingredient in commercial fog fluid, used in entertainment industry fog machines
With pure MEG (mono-ethylene glycol) the hot spot will reach 200 C (392 F). Cooling by other effects such as air draft from fans (not considered in pure nucleation analysis) will assist in preventing large-bubble formation. The mixture of ethylene glycol with water provides additional benefits to coolant and antifreeze solutions, such as preventing corrosion and acid degradation, as well as inhibiting the growth of most microbes and fungi.
It is used in the manufacture of a wide variety of industrial and household chemicals and is a common ingredient in chemicals such as antiseptics, disinfectants, and detergents.
Mixtures labelled naphtha have been produced from natural gas condensates, petroleum distillates, and the distillation of coal tar and peat.
Coking Coal Mineral And Chemical Materials.
Fmcg, such as beverages, chocolates, soft drinks, wood timber, wood lumber, wood pellets, charcoal, euro pallets, energy drink, nutella, copper scrap, aluminum scrap, wheat flour, urea fertilizer, confectionery products, nescafe, fererro rocher, skimmed milk, whole milk etc.
Industrial gloves and pipe.
Steel rods, rebar all standards.Manufacturer, trader
Aluminum scrap.
Cars.
Airco.
Scrap iron, scrap battery.
Order number: 464300 External length: 165 mm External width: 130 mm Internal length: 150 mm Internal width: 100 mm Material: PET-NY-PE Thickness: 160 mu Closure: Security tape P620: Yes P650: Yes UN3373: Yes Air Transport: Yes Road Transport: Yes
For efficient and sustainable packaging of food and non-food, our new flat bags are the ideal choice. Available in fresh and popular colours such as; pink, light green, light grey and white. All bags com with a modern and stylish matt finish. Due to the material composition, these flat bags are fully recyclable and have an excellent barrier. They are very suitable for powders, sports supplements, pills, seeds, sweets, jewellery, creams, beads or to send samples to your customers. There is a choice of two sizes; 70mm x 110mm and 80mm x 130mm and they are very functional to use. The tearnotches (notches) allow the user to open them easily. All sizes and colours are available both with and without grip closure. Request a free sample or contact us to enquire about the possibilities of printing them and producing them completely customized for you. Standard colors: grey - pink - green - white Standard sizes: 70 x 110 mm - 80 x 130 mm Tailor made and printing possible from 10.000 pieces
The first fully recyclable shaped spouted pouch available on the market. Made entirely of a mono material (low density polyethylene with EVOH barrier properties) these pouches are 100% recyclable under the code 4 recycle code (most supermarket and recycle centres offer code 4 drop of points) The pouches are ideal for single use refills of for example; Cosmetics - Coffee scrubs, Dense soaps, gels, Shampoo, Conditioner, Shower gel, Concentrate for products such as (add water to mix) Soap / Detergents - Fabric softener, Car cleaning products, Screen washer fluid, Meal kit sauces / pasta. The pouches are pre-formed and can be filled by the opening on the top edge and sealed using conventional heat sealers â?? the end user can easily access the product by removing the tip of the shaped pouch & easily dose out through the created opening. Available in 5 formats â?? and from just 100 pieces per size. We can also provide you with a fully customized version â?? with full colour printing & custom format from just 10,000 pieces per size. Standard color: transparent Standard sizes: 50 ML - 100 ML - 250 ML - 330 ML - 500 ML - 1000 ML
Safetybags by DaklaPack Secondary leak proof packaging - 100% leak and tamper proof. Available in various sizes, suitable to hold a wide range of primary containers, such as blood tubes, specimen containers and swabs. The pouches are easy to close. They are sequentially numbered and incorporate a tamper-evident seal to ensure ease of identification and security throughout the chain of custody. The pouch is made of strong transparent polyethylene, and is guaranteed to keep liquid inside. Easy to close, simply removing the backing strip and applying even pressure across the strip, the pouch is then hermetically sealed. In combination with the transport blister, the PolyMed mailing envelope and sufficient absorbent material, this composition complies with the packaging regulations (P650 and P959). We would be happy to quote you for various formats and for printing, on request. UN3373 Standard â?? Key Requirements The P650 packaging instructions for liquid substances state:- The primary receptacle(s) shall be leak proof and must not contain more than 1L liquid, and not contain more than 1kg solid. The secondary packaging shall be leak proof for liquids; (DaklaPack's Safetybags) If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them; (DaklaPack's Absorbing sheets + tube holders) If liquid, absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging; The outer packaging must be rigid and must not contain more than 4L liquid or 4kg solid. One surface of the outer packaging must measure at least 100mm x 100mm (DaklaPack's boxes and shipping solutions are fully conform if there is any doubt as to whether or not residual liquid may be present in the primary receptacle during transport, then a packaging suitable for liquids, including absorbent materials, must be used.
100% leak proof, tamperproof and true 95kpa meets DOT and IATA requirements. We at DaklaPack recently designed and patented our own 95kpa Safetybags�® and have had them fully certified by the BVI. DaklaPackâ??s 95kPa transport bags are ideal to use as a secondary watertight receptacle in accordance with DOT and IATA regulations for shipping Biological Substances. DOT and IATA shipping regulations require that UN3373 Biological Substance, Category B specimens are transported in either a primary container or secondary packaging that has passed the 95kPa pressure differential test. Custom sizes and solutions can be made available - contact us for expert advise.
RigidSafetybag - combining 3 packaging elements into 1 & simplifying the packing process. The patented RigidSafetybag by DaklaPack consists of a 100% leak and tamper-proof Safetybag, a blister like tube holder surrounded with sufficient absorbing material to fully absorb any leaked content from the primary receptacle during the unlikely event of a leakage. Due to the rigid internal component, the filled and sealed RigidSafetybag can simply be entered into a fully labelled UN3373 envelope / box and sent to the receiver. Save time effort and money using this simple solution which is fully labelled with usage instruction and provides 100% tamper evidence due to its destructive seal and tamper text in the side seals.
DaklaPack's range of pre built UN3373 P650 & P620 shipping kits. We take the worries out of your hands and provide pre built UN3373 P650 and P620 shipping kits, conform to both ADR and IATA standards. All of our kits have been fully validated, are provide pre built so you can simply drop in the contents, seal closed and prepare for shipment using your prefered courier. Cant find what you are looking for or need something unique, bespoke or custom made? Contact us for expert advice!
DaklaPack - IV UV Protection bags Protect medication from harmful UV light! DaklaPackâ?? s IV UV Protection bags are ideal for protecting IV Infusions, medications, and even nutritional bags against harmful ultraviolet light. Ultraviolet light can cause oxidation, hydrolysis, and loss of potency to sensitive medications. Simply place the IV bag (even bottles, piggyback container & syringes) inside of the IV UV Protection bag to ensure medication potency. The amber colouration protects against UV light whilst offering enough transparency to check fluid levels & flow rates. available in 2 sizes - 135mm x 250mm + 200mm x 400mm and made from a strong 120micron Polyethylene. â?¢ Perfect for cytostatic iv bags & nutrition bags. â?¢ Manufactured from a strong ultraviolet inhabitant polyethylene â?¢ Tested from wavelength 500nm to 320nm with max 5.36% and min 0.15% across the spectrum â?¢ Fully evaluated by SGS and test reports are readily available with full wavelength transmittance curve. We can also provide you with custom sized IV UV protector bags, with a completely custom print, ideal for private health sector organisations. Contact us for more information.
