Ultra-fast setting velocity cyanoacrylate that bonds acidic, insensitive surfaces and porous substrates even under low humidity condition. It is broadly applied on wood, leather, cardboard and plasticized pvc materials.
Features:
Super fast
Strongest bonding
Single component
Easy to use
Net: 20gm
Features:
1.One component,neutral curing,non-corrosive to metal, coated glass, marble etc.
2.Prime-less adhesion to most building materials.
3.Remains flexible over a temperature range of
4.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes.
5.Good compatibility with other neutral silicone sealants.
6.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bond upon exposure to atmospheric moisture.
Main applications:
1.Sealing in joints.
2.Glazing for door and window.
3.Various interior decoration glass, aluminum, ceramic, tile, wood and metal, etc.
4.Many other uses.
Limitations:
1.Can not be used in structural glazing applications.
2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface.
3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure.
4.Not for frost or wet surface.
5.Is not suitable for the place of continuous immersion or year-round moisture.
6.Surface temperature is not below 0¡æ or above 50 ¡æ.
7.Can not contact with strong acids or bases.
8.Cannot be used on joint which bearing structural strength or places of physical damage.
9.Has performed adhesion and compatibility tests on project substrates and all accompanying accessories.
Typical properties:
These values are not intended for use in preparing specifications.
MethodTest ItemUnitStandard Result
GB/T 13477Density g/cm3Specified value 0.1 1.3
GB/T 13477 (ISO 7390) Slump(vertical) mm ¡Ü3 0
GB/T 13477 (ISO 8394) Extrusion rate ml/min 80 380
GB/T 13477(ASTM D 2377) Tack free time h0.9
GB/T 13477 (ISO 7389) Extension recovery8088
GB/T 1347(ASTM C 794) Peel strengthN/mm1.0 1.5
GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization
The GB¡± testing method is equivalent or partly equivalent to that in the
Installation:
1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and cleaning procedures is vital for sealant adhesion.
2.Cleaning materials:clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required).
3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again.
4.Primers: GP111 general purpose silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated.
Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Shelf Life:
9 months from the manufacture date stored in cool & dry place below 27 ¡æ.
Color:
Clear, black, white, gray, other colours as clients¡¯ requirement.
LIMITED WARRANTY INFORMATION ¨C PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer¡¯s tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.¡¯s products are safe, effective, and fully satisfactory for the intended end use.
FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
Foshan shunde mimdy sealant co., ltd. Disclaims liability for any incidental or consequential damages.
Easy of use all temperature gunability.
Primerless adhesion upon curing will form a strong bond to most common building components without the use of a primer.
Long-life reliability cured sealant stays elastomeric from -50 C to 150 C without hardening, cracking or becoming brittle under normal weather conditions.
like Dow Corning 789 Silicone Sealant
Dowsil 789 Silicone Weatherproofing Sealant
Product Description .
Acryrub Ps a high-quality, plasto-elastic onecomponent joint ro+ isealant based on acrylic dispersions.
Key Features:
Very easy to apply.
Colour fast and waterproof after curing.
Can be painted over after curing.
Very good adhesion on many porous surfaces and aluminium.
Easy tooling & finishing.
Non toxic & non flammable.
No mass-water clean up.
Paintable
Application:
Joints with movements up to 15%.
Connection joints in the building industry.
Joints between windowsills, between skirting-board and floor between brickwork etc.
Filling all gaps & cracks.
Perimeter sealing around doors and windows.
Modular kitchen sealing.
Cupboard sealing.
Shelf life And Storage: 12 months from date of manufacturing in unopened packaging stored in a cool and dry place at recommended temperatures between Protect against frost.
quality like mcoy , boss & fevisil ( pidilite)
Additional Information:
Item Code: 001
Production Capacity: 4 ton / day
Delivery Time: 3-4 days
Packaging Details: 1 box 24pcs master box 4 24 96pcs
551 Silicon Sealants Suppliers
Short on time? Let Silicon Sealants sellers contact you.
Product DescriptionWe are a leading Suppliers GP Plus, BSealant, GP Silicone Sealant is a high-quality,elastical one-component joint sealant based onsilicones.Characteristics:- Very easy application- Permanent clear, UV-resistant- Stays elastic after curing- Very good adhesion on many materials- Typical acetic smell- General sealing for automotive applicationsApplications:Building- and construction jointsGlazing and connection jointselastic joints in coldstore and container applicationsSealings in air condition systemsGeneral sealing for automotive applications.
euroking weatherproofing silicone sealant 789 A one part, neutral cure, architectural grade sealant designed for general weathersealing. It easily extrudes in any weather an quickly cures at room temperature to produce a durable, flexible silcone rubber seal.
Features:
Fire resistant sealing and filling of joints and seams or in certain areas where fire resistance is required. Fire resistant tested according to EN 1366-4 until 60 minutes in a gap of 20mm wide. Combine with Silicone Sealant until 180 minutes in a gap of 40m wide. Ensure that you choose the correct fire resistance for your application by consulting the classification and test reports.
FEATURES
Waterproof and Plugging Spray is specially designed for waterproof repair products for pipe roots, nozzles, corners, cracks, slotted wiring and weak leak points in waterproof construction. It is easy to operate and suitable for painting tools that are difficult to reach narrow and complex spaces. This product is professionally designed with anti-corrosion and anti-rust functions .
APPLICATION
1.Leakage plug of family toilets, kitchens, pipes, and walls.
2.Rush repair and leak plugging of building construction projects, rapid repair of roads .
3.Emergency repair and plugging of civil air defense or tunnel engineering .
4.Quick repair of prefabricated components in prefabricated pipe component factories .
5.Emergency repair and water supply engineering of pipe joints of water supply companies .
6.Leakage plug of building floor, basement and other building projects.
High Tempreture Silionce Sealant
Formulated In The USA
Manufactured In The Sultanate Of Oman
Take Above 280 Celcious Tempreture
GROSS WEIGHT 330GMS
Gasket Maker
Butyl Caulk Sealant is a neutral sealant compose of single butyl rubber with excellent properties of anti-aging/corrosion/oxidation, water resistance, tightness; wide range stretch of deformation and crack especially under low temperature circumstance.
Application:
Applies to all kinds of seams, holes and cracks in steel roofs; sun panels; windows and doors.It is also used widely for the car industry.
Tech Data:
Solid: 83%
Gravity: 1.4 0.1g/cm3
Service Temperature: -40 to 180
Lifetime: 20 years
Viscosity: 1800 300 dpa.s
UV Resistance: 2000 hours
Size: 300mL/cartridge or 25kg/drum
Drivesafe heavy-duty tyre sealant: Drivesafe Tyre Sealant
Drivesafe heavy-duty PLUS+ tyre sealant 20-litre drum designed for use in commercial vehicles and off-road plant and equipment due to the advanced properties with additional strength and elasticity in the gel offering exceptional sealing capabilities.
Drivesafe heavy-duty PLUS+ tyre sealant for use in plant and equipment can be used as a preventative or as an effective method of tyre repair extremely cost-effective minimising equipment downtime and reducing tyre expenditure
Drivesafe heavy-duty PLUS+ tyre sealant for use in all aspects of commercial applications offers many advantages, the gel applies a protective coating on the inner area of the tyre acting as a barrier against natural air migration through the tyre casing which helps to maintain correct tyre operating pressures for longer periods of time. By maintaining correct tyre pressures the tyre runs cooler with the tyre's ability to naturally deflect foreign objects more efficiently reducing damage sustained by the foreign object puncturing the casing and causing damage beyond repair.
Drivesafe heavy-duty PLUS+ tyre sealant water-soluble gel can be removed from the tyre allowing a repair to be undertaken to the relevant safety standards
Introduction:
Homey p35 polyurethane sealant for construction, is one-part room temperature moisture
Curing polyurethane with high adhesion strength, aging resistant, vibration exhaustion resistant,
Low, temperature resistant and free-corrosive properties, is excellent where gap filling requirements are needed.
Typical uses:
, precast panel, wood, aluminium
, pvc joinery seams
, curtain wall, bakes clay and concrete roof tiles
Cas no.:, 9009-54-5
Other names:, pu adhesive sealant
Mf:, mixture
Einecs no.:, 230-391-5
Place of origin:, china(mainland)
Classification:, other adhesives
Main raw material:, polyurethane
Usage:, construction, woodworking, other
Brand name:, homey
Model number:, p35
Type:, polyurethane sealant
Component:, one component
Hs code:, 3506100010
Curing system:, moisture
Volume:, 310ml
Color:, white, grey, black
Performance:, low temperature resistant, vibration ehaustion, anti-aging
Oem:, available
Price:, negotiable
Shelf life:, 9months
Storage:, store at 25, , or below
Packaging details:, 310ml;24pcs/ctn
20' container 24pcs/ctn, 2000 cartons without pallet, 1440 with pallet
Anti-fungal GP silicone sealant bathroom using silicone sealant is a one part, fast curing and permanently flexible silicone sealant; it has excellent waterproof performance, the sealant also is also a type of anti-fungal able to use in bathroom and kitchens. It has excellent tensile and compression restoring ability. It has strong adhesion to glass, PVC, ceramic, concrete, wood, metal, tiles, vinyl and most building material.
Use: For sealing, repairing, glazing and mending of bathtubs, shower stalls, bathroom vanities, kitchen counters, aquarium, auto windscreen, glazing for window panels, wood or metal frameworks bonding, sealing air-conditioning systems, draught proofing, skylights, port lights, back lights etc.
Acetic gp silicone sealant is one-part room temperature acetoxy silicone sealant. It has excellent weather ability, waterproof and good adhesion to most construction materials. It is suitable for sealing, repairing, glazing and mending of glass, auto windscreen, glazing for window panels and other general building materials bonding.
Description
Our insulating glass silicone sealant is a neutral curing silicone sealant with high modulus and high strength, purposely designed for glazing insulating glass. It has the advantage of low air permeability. Our insulating glass silicone sealant works with two-component mixing equipment and the two components react quickly after mingled in scale, then cures to elastomer.
Applications
As a secondary edge adhesive sealant in insulating glass units.
White color
1. Application
*Sanitary sealing around sinks, tubs, urinals and wirlpools
*Sealing for kitchen, skirting lines, furniture, ceramic tiles.
*Sealing for windows and doors with anti-mildew requirements.
2. Product features
*One component, excellent extrusion, easy to use
*Excellent mildew resistence standard
*Ecofriendly with low VOCs
*Resists staining, spotting, and color changes
3. Packing specification
*Cartridge: 240ml/260ml/280ml/300ml
*Sausage: 590ml
551 Silicon Sealants Suppliers
Short on time? Let Silicon Sealants sellers contact you.
