Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99. GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: - "Very Low Sulphur" is mazut with a sulphur content of 0.5% - "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0% - "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0% - "High Sulphur" is a mazut with a sulphur content of 2.0-3.5% - Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
Karl Storz is a renowned German medical device company that specializes in the production of endoscopy equipment and medical imaging devices. Endoscopy involves the use of specialized instruments and cameras to visualize the interior of organs and cavities within the body. Karl Storz is particularly known for its high-quality endoscopes and related equipment. Here are some key points about Karl Storz endoscopes: Endoscopy Equipment: Karl Storz offers a wide range of endoscopy equipment, including rigid and flexible endoscopes. These instruments are used in various medical specialties such as gastroenterology, urology, gynecology, otolaryngology, and arthroscopy. Innovation: Karl Storz has a history of innovation in the field of endoscopy. The company has been a pioneer in developing new technologies and improving existing ones to enhance the precision and capabilities of endoscopic procedures. Quality and Durability: The company is known for producing high-quality, durable endoscopic instruments. Karl Storz endoscopes are designed to meet stringent quality standards to ensure reliability and performance in medical settings. Wide Range of Applications: Karl Storz endoscopes are used in a broad spectrum of medical procedures. Whether it's diagnostic or therapeutic, these endoscopes play a crucial role in allowing medical professionals to visualize and treat conditions internally without the need for major surgery. Global Presence: Karl Storz is an internationally recognized brand, with a global presence. The company's products are used by healthcare professionals worldwide.
The Hem-o-lok Ligating Clip System, produced by Teleflex under the Weck brand, is a medical device used in surgical procedures for the ligation (closing off) of vessels or tissue structures. The Hem-o-lok clips are commonly utilized in laparoscopic and robotic surgeries. Key features and aspects of the Teleflex Weck Hem-o-lok Ligating Clip System include: Material: The clips are typically made from a polymer material, providing a secure and reliable closure when applied to vessels or tissues. Design: Hem-o-lok clips are designed to be easy to use, with a simple mechanism for application. They are available in various sizes to accommodate different surgical needs. Application: Surgeons use Hem-o-lok clips to occlude or ligate blood vessels or other structures during surgery. These clips are widely used in minimally invasive procedures, such as laparoscopic and robotic surgeries. Secure Closure: The design of the clips aims to provide a secure closure, preventing bleeding or leakage from the ligated structures. Color Coding: The clips are often color-coded according to size for easy identification during surgery, allowing surgeons to choose the appropriate clip for the vessel or tissue being ligated.
Biosensors is a medical device company known for its innovations in interventional cardiology, particularly in the field of coronary stents. The BioMatrix platform includes a range of drug-eluting stents (DES) designed to be used in the treatment of coronary artery disease. Key features of the BioMatrix stent platform, which may extend to the NeoFlex model if it's a part of the series, may include: Drug-Eluting Stent: The stents in the BioMatrix platform are drug-eluting, meaning they are coated with a medication (such as an anti-restenotic drug) designed to inhibit the regrowth of tissue inside the treated blood vessel. Biodegradable Polymer: Some versions of the BioMatrix stent use a biodegradable polymer to deliver the drug to the target site. The polymer gradually dissolves over time, leaving only the metallic stent behind. Flexible Design: The stents are designed to be flexible, allowing for easier navigation and deployment in the coronary arteries. Thin-Strut Technology: Thin struts can contribute to improved deliverability and conformability of the stent to the vessel wall. Various Sizes: The BioMatrix stent platform typically offers stents in various sizes to accommodate different patient anatomies and lesion characteristics.
The EV3 SpiderFX is commonly associated with the SpiderFX Embolic Protection Device, which is used in the field of interventional cardiology. The device is designed to capture and remove embolic debris that may be released during certain vascular procedures, particularly during carotid artery stenting. Key features of the EV3 SpiderFX Embolic Protection Device may include: Embolic Protection: The primary function of the device is to provide protection against embolic debris dislodged during the intervention. It helps prevent these debris from reaching and potentially blocking smaller blood vessels. Flexible Design: The SpiderFX typically has a flexible design that allows it to navigate through blood vessels, facilitating the deployment and retrieval process. Distal Protection: The device is designed to be positioned distal to the treatment site, capturing any embolic debris before it can travel downstream. Capture Basket: The device often includes a capture basket that traps and retains embolic debris, preventing it from causing harm in the circulation. Compatibility: The SpiderFX device is designed for compatibility with various catheters and guide wires commonly used in interventional procedures.
Key features and characteristics of the Bard Denali DL950F Vena Cava Filter may include: Retrievable Design: The Bard Denali DL950F is often designed to be retrievable, allowing for potential removal when the risk of pulmonary embolism has decreased. Cone Design: Vena cava filters typically have a cone-shaped design that helps to trap and prevent blood clots from traveling to the pulmonary arteries. Biocompatible Materials: The filter is typically made of biocompatible materials suitable for long-term implantation. Ease of Deployment: The deployment mechanism is designed for ease of use during the implantation procedure. Radiopaque Markers: Radiopaque markers are often incorporated into the design to aid in accurate placement under fluoroscopy or other imaging modalities. Compatibility with Imaging: The device is designed to be compatible with various imaging technologies, allowing healthcare professionals to monitor its position and effectiveness.
Here are some general features that you might find in KARL STORZ laparoscopes: Diameter: Laparoscopes come in different diameters, and the choice depends on the specific surgical procedure and patient anatomy. Common diameters include 5mm and 10mm. Angle of View: The angle of view is an important parameter. For instance, a laparoscope with a 30-degree angle provides a wide field of view, while a 0-degree laparoscope offers a straight-ahead view. Autoclavable: Many laparoscopes are designed to be autoclaved, allowing for sterilization and reuse. Optics: High-quality optics are crucial for clear visualization during surgery. KARL STORZ laparoscopes typically feature advanced optics for improved image quality. Light Transmission: Efficient light transmission is essential for illuminating the surgical field. LED or xenon light sources are often used for this purpose.
An endobronchial tube is a medical device designed for use in the respiratory system, specifically within the bronchial tubes. These tubes are used in various medical procedures, such as bronchoscopy, endobronchial intubation, and lung surgery. The primary purpose of an endobronchial tube is to maintain an open airway and facilitate the delivery of oxygen or anesthesia to the patient's lungs during surgical or diagnostic procedures. Key features and uses of endobronchial tubes include: Bronchoscopy: Endobronchial tubes are often used in bronchoscopy procedures, allowing physicians to visually examine the bronchial tree and perform diagnostic or therapeutic interventions. Lung Surgery: During certain lung surgeries, endobronchial tubes may be employed to isolate and collapse one lung, providing a clear field of view for the surgeon. Ventilation: Endobronchial tubes can be used for selective lung ventilation. They can be positioned to direct ventilation to a specific lung, allowing the other lung to be collapsed or isolated. Anesthesia: In some cases, endobronchial tubes are used for delivering anesthesia during thoracic surgeries or procedures.
I can provide some general information: PTFE Guide Wire: PTFE stands for polytetrafluoroethylene, which is a synthetic fluoropolymer of tetrafluoroethylene. It is known for its low friction properties and is often used in medical applications. Medtronic: Medtronic is a global healthcare company that produces a wide range of medical devices and technologies. This includes products used in cardiology, neurology, diabetes, and other medical specialties.
For medical gases, Argon is commonly used in various medical applications, including surgical procedures, where it can be employed for tissue coagulation or as a cryogen. The specific details of a product, such as its pressure, purity, and intended use, would be provided by the manufacturer or supplier.
I can provide some general information: CORDIS: CORDIS is a brand known for producing medical devices, particularly in the field of cardiology. CORDIS is a part of Cardinal Health. Product Code 534518T: The product code suggests that it's associated with a specific medical device or product, likely in the field of cardiology or vascular interventions.
Teleflex is a global provider of medical technologies, offering a wide range of products, including devices for vascular access, anesthesia, respiratory care, and more.
Accu-Chek test strips are essential components of blood glucose monitoring for individuals with diabetes. These strips are designed to work seamlessly with Accu-Chek blood glucose meters, enabling accurate and reliable measurement of blood sugar levels. The strips utilize advanced technology to require only a small blood sample, making the testing process more comfortable. With rapid and precise results, Accu-Chek test strips empower users to effectively manage their diabetes by providing valuable insights into their current glucose levels. This user-friendly and indispensable tool plays a crucial role in facilitating proactive health management for individuals living with diabetes.
STERRAD Cassette features proprietary technology utilizing low-temperature hydrogen peroxide gas plasma for terminal sterilization of medical devices. Their sterilant comes in an easily loaded cassette format that delivers a predefined quantity of hydrogen peroxide per cycle to achieve sterilization both conveniently and effectively. Best of all, each cassette is a closed system, sealed for the operator's safety, and has a chemical indicator on the packaging in order to detect any leakage of sterilant during transportation. Finally, unlike some sterilization modalities, ASP's uniquely bar-coded STERRAD System cassettes can be transported via ground or air shipment. Product Features: STERRAD system sterilant cassettes made by ASP The pre-loaded cassette provides an easy and highly effective way to sterilize Each STERRAD sterilant cassette is a closed system and sealed for the operator's safety Each STERRAD sterilant cassette is individually wrapped with an external leak monitor to detect any leakage during transportation
BOSTON SCIENTIFIC 109681 AngioJet Solent Omni Over-The-Wire Power Pulse Enabled Thrombectomy Set, 120cm x 6F (X) ***EXPIRED 2018-07-31*** All items listed are on inventory. When the item is expired must be used for educational, training, veterinary or non-clinical research purposes only. Reasonable offers considered. International shipping requires a quote. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." IF YOU WANT TO PURCHASE THIS ITEM THEN CLICK BUY NOW YOU DO NOT NEED A PAYPAL ACCOUNT TO MAKE PAYMENT AT All items listed are on inventory.
