100% Namibian Hardwood Charcoal for export. The charcoal is made from hardwood
obtained from the clearing of invasive bush on Namibian farms.
The invasive bush is cleared as it prevents the proper replenishment of the groundwater
reserves in an already arid country. The dense bush prevents the grasslands from being used as
grazing for livestock and wildlife.
The Blackthorn (Acacia Mellifera) makes up 80% of the packed product. The balance is made-
up of Candle Thorn (Acacia Hebeclada) and Mopane (Colophospermum mopane).
threatening the indigenous fauna and flora. The particle size ranges from 30mm to 90mm.
Charcoal is normally packed in 20kg white WWP. It can also be packed in bags supplied by the
client.
This would include Kraft paper bags and polyprop bags.
Well-seasoned firewood logs. We harvest dead trees and dead branches from the hardwood
Sekelbos tree in the North-West Province of South Africa. This area is commonly referred to as
the Bosveld. The tree is classified as an invasive species. The bark naturally comes off due to
the harsh sun and arid conditions after two to three years.
Biochar SA Hardwood 1mm>15mm
Hardwood charcoal Biochar made from South African Sekelbos. Sekelbos is an invasive
species threatening the indigenous fauna and flora.
The particle size ranges from 1mm to
15mm.
Biochar is normally packed in 20kg white WWP. It can also be packed in branded bags supplied by the
client.
Property Unit Specification
Cetane Number Minimum 51
Density at 15C kgm 820 845
Viscosity at 40C mms 20 45
Flash Point C Minimum 55
Cold Filter Plugging Point CFPP C Varies by climate zone
Sulfur Content mgkg Maximum 10
Polycyclic Aromatic Hydrocarbons PAH by mass Maximum 8
Lubricity HFRR m Maximum 460
Distillation Recovery at 250C by volume Minimum 85
Distillation Recovery at 350C by volume Maximum 95
Ash Content by mass Maximum 001
Water Content mgkg Maximum 200
Kaon Series Ubiquitous OCT Scanner for skin imaging
Book-sized handheld OCT system powered and controlled by an external PC via USB
Product Specifications:
- Center wavelength: 840 nm
- A-scan rate: 26,000 per second (typical)
- Output power: > 1 mW (high power available upon request)
- Scan Pattern: Cross, Volume, Raster, Circle (Customization available)
- Imaging depth: 0.9 mm (in air)
- Depth resolution: 9 micrometers (in air)
- Pixel Resolution: 1024 x 256, 512 x 128 (typical)
- Lateral resolution: < 15 micrometers
- Scan Range: 6 mm x 6 mm
Product Interface & Dimensions:
- Data interface: USB 3.0
- Dimension: 160 mm(W) X 45 mm(D) X 230 mm(H)
- Power Supply: USB-A and/or Power Adaptor
- Weight: 750g
Kaon Series Ubiquitous OCT Scanner for skin imaging
Book-sized handheld OCT system powered and controlled by an external PC via USB
Product Specifications:
- Center wavelength: 840 nm
- A-scan rate: 26,000 per second (typical)
- Output power: > 1 mW (high power available upon request)
- Scan Pattern: Cross, Volume, Raster, Circle (Customization available)
- Imaging depth: 0.9 mm (in air)
- Depth resolution: 9 micrometers (in air)
- Pixel Resolution: 1024 x 256, 512 x 128 (typical)
- Lateral resolution: < 15 micrometers
- Scan Range: 6 mm x 6 mm
Product Interface & Dimensions:
- Data interface: USB 3.0
- Dimension: 160 mm(W) X 45 mm(D) X 230 mm(H)
- Power Supply: USB-A and/or Power Adaptor
- Weight: 750g
Kaon Series Ubiquitous OCT Scanner for skin imaging
Book-sized handheld OCT system powered and controlled by an external PC via USB
Product Specifications:
- Center wavelength: 840 nm
- A-scan rate: 26,000 per second (typical)
- Output power: > 1 mW (high power available upon request)
- Scan Pattern: Cross, Volume, Raster, Circle (Customization available)
- Imaging depth: 0.9 mm (in air)
- Depth resolution: 9 micrometers (in air)
- Pixel Resolution: 1024 x 256, 512 x 128 (typical)
- Lateral resolution: < 15 micrometers
- Scan Range: 6 mm x 6 mm
Product Interface & Dimensions:
- Data interface: USB 3.0
- Dimension: 160 mm(W) X 45 mm(D) X 230 mm(H)
- Power Supply: USB-A and/or Power Adaptor
- Weight: 750g
Kaon Series Ubiquitous OCT Scanner for Industrial Inspection
OCT Testbed with built-in PC for sample analysis.
Product Specifications:
- Center wavelength: 840 nm
- Output power: > 1 mW (high power available upon request)
- Imaging depth: 2.6 mm (in air)
- Depth resolution: 9 m (in air)
- Lateral resolution: < 15 m
- A-scan rate: 26,000 per second (typical)
- Scan Pattern: Cross, Volume, Raster, Circle (Customization available)
- Pixel Resolution: 1024 x 256, 512 x 128 (typical)
- Scan Range: 6 mm x 6 mm (changeable by built-in PC)
Product Interface & Dimensions:
- Data interface: HDMI (monitor not included)
- Power Supply: DC Adaptor (included)
- Dimension: 240 mm(W) X 100 mm(D) X 260 mm(H) (approx.)
- Weight: less than 1 kg
World Simplest Procedure: No Upfront Payment, POF FOR POP DEAL PRICE: USD 560/MT Gross.
VTT- FOB ASWP TRANSACTION PROCEDURES:
1. Buyer provides ICPO incorporating sellerâ??s procedures, Buyer RWA + ATV for seller to perform due diligence and verify POF with Buyer's Bank.
2. Seller sends signed Commercial Invoice (CI) to Buyer and Buyer countersigns and sends CI back to seller within 48 hours. NCNDA+IMFPA is completed and signed off by all parties.
3. Products will be loaded onto a vessel at the seller's loading port and fresh SGS will be completed and provided to the buyer.
4. Seller will provide buyer with a copy of the Charter Party Agreement; therefore, the buyer can view the vessel as it is moving to the destination port.
5. The buyer has choice to either have the product discharged in any of the ports specified above based on product.
6. Upon arrival of the vessel tanker at the final discharge port, the buyer shall show updated POF, conduct the SGS/CIQ Inspection (optional at buyer's expense) and make the payment for the full shipment via TT Wire or MT103 TT (Wire Transfer). Buyer has the choice of paying in full through TT Wire or MT103 upon first SGS at loading port, or when the product starts discharging into buyerâ??s tank or as soon as the discharge is completed into the buyerâ??s tank.
7. Seller transfers ownership of the product to the buyer as per the buyerâ??s instructions.
8. The seller pays all buyer and seller intermediaries the full commission amount as stated in the NCNDA/IMFPA agreement. Subsequently, monthly contract proceeds as outlined in the terms and conditions of the sales and purchase agreement between the buyer and the seller.
VTO PROCEDURES- FOB ASWP PROCEDURES (VESSEL TAKE OVER):
1. Buyer provides ICPO incorporating sellerâ??s procedures, Buyer RWA + ATV for seller to perform due diligence and verify POF with Buyer's Bank.
2. Seller sends signed Commercial Invoice (CI) to Buyer and Buyer countersigns and sends CI back to seller within 48 hours. NCNDA+IMFPA is completed and signed off by all parties.
3. Products will be loaded onto a vessel at the seller's loading port and fresh SGS will be completed and provided to the buyer.
4. Seller will provide buyer with a copy of the Charter Party Agreement; therefore, the buyer can view the vessel as it is moving to the destination port.
5. Upon arrival of the vessel tanker at the final discharge port, the buyer shall show updated POF, conduct the SGS/CIQ Inspection (optional at buyer's expense) and make the payment for the full shipment via TT Wire or MT103 TT (Wire Transfer).
6. Seller transfers ownership of the product and buyer takes over the vessel.
7. The seller pays all buyer and seller intermediaries the full commission amount as stated in the NCNDA/IMFPA agreement. Subsequently, monthly contract proceeds as outlined in the terms and conditions of the sales and purchase agreement between the buyer and the seller.
PRODUCTS PRICES AND LIFT ABLE QUANTITIES (FOB) - VOPAK TERMINALS.
DIESEL OIL EN590 -10PPM LIFT ABLE QUANTITY
FOB: Minimum Quantity: 40,000 Metric Tons per Month, Maximum Quantity: 300,000 Metric Tons Lift able. FOB Price: Gross USD $560.00MT / Net USD $540.00MT, FOB Rotterdam |Jurong & Fujairah Ports Commissions: $20, Seller side - $ 10.00 per Metric Tons / Buyer side - $ 10.00 per Metric Tons, Payable by Seller
FOB TRANSACTION PROCEDURE FOB VOPAK TERMINALS DIP & PAY
1. Buyer Sends CIS and ICPO of their purchasing product to Seller for verification and processing:
2. Seller submit buyer files to Vopak Terminal Manager.
3. Vopak Terminal Manager send Vopak Agreement to buyer through Seller. Buyer within 48 hours sign and return the Vopak Agreement through Seller.
4. Buyer finalizes the Vopak Terminal Protocols cost through the supplier with the Vopak Terminal Manager, and obtain the following and submit the same to Seller as listed below.
o VopakBarcode
o VopakRegistrationinformation.
o VopakReferenceCode.
4b. Format of Authorization Form to accompany the information
LETTER OF AUTHORIZATION:
We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of Barcode code at Royal Vopak Rotterdam, with contract reference number: _____________.
NB: Immediately buyer complete the above process and receive Vopak Reference through Vopak Terminal Manager, buyer will have access to communicate directly to Vopak Management with the help of the Reference code assigned to the buyer.
5. Seller, sends Cl for Buyer's endorsement. Buyer signs the CI and retune back within 24 hours of receiving alongside side with Sign Letter of Authorization.
6. Seller issue Buyer Full POP documents along with fresh SGS (Not less than 48 hours, one-time official confirmation mail from SGS official).
Fresh SGS Report or Saybolt (Not later than 24 72 hours)
Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located.
Injection Report Agreement
Authorization to Sell
Authorization to verify the product in the tank (ATV)
Country Certificate of Origin
Approved Dip Test Authorization (DTA
Availability of Product,
Commitment to Supply,
7. After verification of full POP by buyer, injection begins.
8. Upon completing the Injection, seller transfers title to buyer.
9. Buyer makes full payment after via MT103.
Roasted bamboo salt, all pulses items, rice items, and other agro commodities.
even sugar, salt, honey, vegetable powder/dehydrated, and many herbal products,
we mainly deal in nitrile gloves, masks, and syringes..Manufacturer
Outdoor energy storage power supplies. its main products encompass portable outdoor energy storage power supplies, energy storage power supplies, ups energy storage power supplies, inverter power supplies, emergency start up power supplies, and photovoltaic energy storage power supplies, etc. our company's products are compatible with and support solar photovoltaic panels and vehicle charging..
