Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99. GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: - "Very Low Sulphur" is mazut with a sulphur content of 0.5% - "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0% - "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0% - "High Sulphur" is a mazut with a sulphur content of 2.0-3.5% - Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
the Boston Scientific Promus Elite is a coronary drug-eluting stent system. It is designed for use in patients undergoing percutaneous coronary intervention (PCI) procedures to treat coronary artery disease. Here are some key features and points related to the Boston Scientific Promus Elite coronary stent: Drug-Eluting Stent: The Promus Elite is a drug-eluting stent (DES), meaning it is coated with medication to help prevent the re-narrowing (restenosis) of the treated coronary artery. Drug Coating: The stent typically features a polymer coating containing an anti-proliferative drug. This drug is slowly released over time to inhibit the growth of tissue inside the stent, reducing the risk of restenosis. Cobalt Chromium Alloy: The stent is often made of a cobalt chromium alloy, known for its strength and flexibility. This material allows for a thin stent strut design, which can be beneficial in terms of deliverability and conformability. Delivery System: The stent is delivered to the target area using a catheter-based delivery system. The catheter is guided through the blood vessels to the site of the coronary artery lesion. Radiopaque Markers: Radiopaque markers on the stent aid in proper placement and visualization under X-ray guidance during the procedure.
The Accu-Chek Performa Test Strips are used in conjunction with Accu-Chek Performa blood glucose meters. These test strips are an essential component for monitoring blood glucose levels in individuals with diabetes. Here are some key points about Accu-Chek Performa Test Strips: Compatibility: Accu-Chek Performa Test Strips are specifically designed to work with Accu-Chek Performa blood glucose meters. Blood Glucose Monitoring: These test strips are used to measure the concentration of glucose in a small blood sample. This helps individuals with diabetes manage their blood sugar levels. Quick Results: The test strips provide rapid and accurate results, allowing individuals to monitor their blood glucose levels conveniently at home. Capillary Action Technology: The strips often use capillary action technology, which helps to draw in a precise amount of blood for the test. Coding: Some blood glucose test strips require manual coding to match the code on the test strip vial with the code on the meter. It's important to follow the specific instructions provided by the manufacturer regarding coding. Storage: Proper storage of test strips is essential for accurate results. Test strips are typically stored in a cool, dry place, and users should check the expiration date before use.
the Cordis Emerald Guidewire is a product developed by Cordis Corporation, a subsidiary of Cardinal Health. Guidewires are medical devices used in various interventional procedures to navigate through blood vessels, providing access for other devices and treatments. Key features of the Cordis Emerald Guidewire may include: Material: The guidewire is typically made from materials like stainless steel or nitinol, which offer flexibility and support for navigating through the vascular system. Coating: Guidewires may have hydrophilic or hydrophobic coatings to enhance their lubricity, making it easier for them to pass through blood vessels. Tip Design: The tip of the guidewire is often designed to be atraumatic, reducing the risk of vessel injury during navigation. Radiopacity: The guidewire is often designed with radiopaque markers to aid in fluoroscopic visualization during procedures. Length and Diameter: Guidewires come in various lengths and diameters to suit different procedures and anatomies.
The EverFlex stent is designed for use in the treatment of peripheral arterial disease (PAD), specifically in the iliac arteries. Key features of the EverFlex Protege stent may include: Self-Expanding Design: The stent is self-expanding, meaning it can open and conform to the shape of the artery without the need for balloon inflation. Nitinol Construction: The stent is typically made of nitinol, a nickel-titanium alloy known for its flexibility and ability to maintain shape memory. Longitudinal Flexibility: The stent is designed to provide longitudinal flexibility, allowing it to adapt to the natural movement of the vessel. Iliac Artery Treatment: The EverFlex Protege stent is specifically indicated for use in the iliac arteries, which are located in the pelvis.
I can provide some general information based on the terms used: Asahi: Asahi Intecc Co., Ltd. is a company known for producing medical devices, particularly guidewires and microcatheters for interventional procedures in cardiology and radiology. Sion Blue: The term "Sion Blue" could refer to a specific type or model of guidewire produced by Asahi Intecc. Guidewires are thin, flexible wires used to navigate through blood vessels during various medical procedures.
I can provide some general information: PTFE Guide Wire: PTFE stands for polytetrafluoroethylene, which is a synthetic fluoropolymer of tetrafluoroethylene. It is known for its low friction properties and is often used in medical applications. Medtronic: Medtronic is a global healthcare company that produces a wide range of medical devices and technologies. This includes products used in cardiology, neurology, diabetes, and other medical specialties.
The "SpiderFX" may refer to a specific type of embolic protection device used during carotid artery stenting procedures. Embolic protection devices are designed to capture and remove debris released during the stenting process to prevent it from traveling to the brain, reducing the risk of stroke.
I can provide some general information: CORDIS: CORDIS is a brand known for producing medical devices, particularly in the field of cardiology. CORDIS is a part of Cardinal Health. Product Code 534518T: The product code suggests that it's associated with a specific medical device or product, likely in the field of cardiology or vascular interventions.
Fresenius fx 60 classic dialyzer available for sale wholesale and best prices available
8410-0254 HyperSoft 3D Advanced, 2.5mm Large Loop Dia, 4cm INDICATIONS FOR USE: The MicroPlex�® Coil System (MCS) is intended for the endovascular embolization of intracranial aneurysms and other neurovascular abnormalities such as arteriovenous malformations and arteriovenous fistulae. The MCS is also intended for vascular occlusion of blood vessels within the neurovascular system to permanently obstruct blood flow to an aneurysm or other vascular malformation and for arterial and venous embolizations in the peripheral vasculature
Covidien EGIA60AMT - Endo GIA Reload -Articulating, Medium/Thick -Cartridge Color: Purple -Staple Size (Inner to Outer): 3mm, 3.5mm, 4mm
Charcoal BBQ grills, also known as charcoal barbecues or charcoal grills, are outdoor cooking appliances designed for grilling and smoking food using charcoal as the primary fuel source. These grills are popular for their ability to impart a distinct smoky flavor to grilled foods.
Material Number: M0031681890 Description: Straight, 2-tip marker Total / Distal Length: 150cm/6.0cm The Excelsior SL-10 Microcatheter with Thin Wall Technology and Lubricious Hydrolene�® Outer Surface is designed to provide outstanding performance 1.7F (0.56mm) Low Profile Distal Shaft, Excelsior SL-10 Microcatheter is designed with a low profile tip to enhance access to distal vasculature and ease of passage of the catheter trip through stent interstices. Atraumatic Distal Tip, Specifically engineered for atraumatic access, the rounded, low-durometer, unbraided tip offers exceptional softness and flexibility. Variety of Tip Shapes, Offered in six clinically relevant shapes to improve access and navigability.
