It was used as a bio fuel in boilers.
Everything required for hotels, hotel amenities, soaps, shampoo, lotions, creams, dental kits, dishwashing detergents, surface cleaners, intense bleach, towels, bathrobes, all textile products, Our products are sold wholesale as single-use and kits. We supply products to all Hotels, Restaurants and Hospitals according to their needs.
Powever High Speed Door Servo Control System
Single lane motorized full height turnstile, electric full height turnstile gate, full height turnstile gate is easily integrates various access control systems Single lane motorised full-height turnstile JDFHT-8 is a full-height security solution to mitigate tailgating and handle moderate throughput by controlling access to various facilities and enclosures, any illegal intrusion or tailgating attempts will activate a alarm, which supports anti-collision function by which access control turnstile will be locked automatically when the opening signal is not received. Single full height turnstile JDFHT-8 is easy to use and maintenance, and automatically detect whether the gate is in the initial position. Single lane motorised full-height turnstile JDFHT-8 is available in both one-way and two-way access control, and supports automatic reset function. After opening the gate, the full height turnstile gate will automatically cancel the access rights of pedestrians when they do not pass within the specified time. In addition, the passage will be released for free passing in case of power failure or emergency. Single Lane Motorised Full-Height Turnstile Features 1. Available in both one-way and two-way access control 2. Easily integrates with almost any access control system 3. Free access under power failure 4. Easy, safe and fast to use 5. Easy installation and field-configurable 6. Easily change turnstile passage mode 7. Durable construction suitable for outdoor use in all weather conditions 8. Automatic self-centering prevents over or under travel of rotating section 9. Full height for maximum security 10. Free egress in emergencies or loss of power Single Lane Motorised Full-Height Turnstile Applications Industrial plants Company premises Power plants Parking sites Bike parks Military installations Single Lane Motorised Full-Height Turnstile Parameters Housing Material : #304 stainless sheet Dimension : 1500 x 1350 x 2300mm Power Supply : AC220V / AC110V, 50/ 60 Hz Channel Width : 600mm IP Rate : IP45 Pass Speed : 30 ~35 persons per minute Input Interface : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Gate open when power failure : Yes Open Time : 0.2 second Life Cycle : 5 million times Working Temperature : -30 C~+70 C, Relative Humidity: 0%, no condensation Working Environments : Indoor, outdoor (with shelter)
Crowd control full height turnstile, full height security turnstile access control, automatic full height turnstile gate is reliable with good performance of tailgating protection Crowd control full height turnstile JDFHT-3 is a full-height security solution to mitigate tailgating and handle moderate throughput by controlling access to various facilities and enclosures, any illegal intrusion or tailgating attempts will activate a alarm, which supports anti-collision function by which access control turnstile will be locked automatically when the opening signal is not received. The access control full height turnstile JDFHT-3 is easy to use and maintenance, and automatically detect whether the gate is in the initial position. Crowd control full height turnstile JDFHT-3 is available in both one-way and two-way access control, and supports automatic reset function. After opening the gate, the automatic full height turnstile will automatically cancel the access rights of pedestrians when they do not pass within the specified time. In addition, the passage will be released for free passing in case of power failure or emergency. Crowd Control Full Height Turnstile Features 1. Available in both one-way and two-way access control 2. Easily integrates with almost any access control system 3. Free access under power failure 4. Easy, safe and fast to use 5. Easy installation and field-configurable 6. Easily change turnstile passage mode 7. Durable construction suitable for outdoor use in all weather conditions 8. Automatic self-centering prevents over or under travel of rotating section 9. Full height for maximum security 10. Free egress in emergencies or loss of power Crowd Control Full Height Turnstile Applications Industrial plants Company premises Power plants Parking sites Bike parks Military installations Crowd Control Full Height Turnstile Parameters Housing Material : #304 stainless sheet Dimension : 1600 x 1350 x 2300mm Power Supply : AC220V / AC110V, 50/ 60 Hz Channel Width : 600mm IP Rate : IP45 Pass Speed : 30 ~35 persons per minute Input Interface : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Gate open when power failure : Yes Open Time : 0.2 second Life Cycle : 5 million times Working Temperature : -30 C~+70 C, Relative Humidity: 90%, no condensation Working Environments : Indoor, outdoor (with shelter)
#304 stainless double lane full height turnstile gate, full height rotor turnstiles, full height security turnstile with 2-year warraty designed for high security Double lane full-height turnstile gate JDFHT-7, acting as an effective full height security solution, ensures vandal proof security level to large variety of possible applications: stadiums, factories, parks, premises with highest security requirements. Unauthorized entries or attempts to tailgate on an authorized entry are deterred and activate the alarm. Full height turnstile JDFHT-7 gate allows free access under power failure which is in strict compliance with fire safety requirements. In addition, access control full height turnstile JDFHT-7 is fast, relable and east to use and maintain. Double lane full-height turnstile gate JDFHT-7 operates silently in a reliable way and can be easily integrated with any access control systems to allow only one person per authorized credential, and automatically cancel the access rights of pedestrians when they do not pass within the specified time. Finally, both one-way and two-way access control are available with double full height turnstile JDFHT-7. Single Lane Full-Height Turnstile Gate Features 1. Available in both one-way and two-way access control 2. Easily integrates with almost any access control system 3. Free access under power failure 4. Easy, safe and fast to use 5. Easy installation and field-configurable 6. Easily change turnstile passage mode 7. Durable construction suitable for outdoor use in all weather conditions 8. Automatic self-centering prevents over or under travel of rotating section 9. Full height for maximum security 10. Free egress in emergencies or loss of power Double Lane Full-Height Turnstile Gate Applications Industrial plants Company premises Power plants Parking sites Bike parks Military installations Double Lane Full-Height Turnstile Gate Parameters Housing Material: #304 stainless sheet Dimension: 2400 x 1450 x 2300mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 600mm IP Rate: IP45 Pass Speed: 30 ~35 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface: RS485 Gate open when power failure : Yes Open Time: 0.2 second Life Cycle : 5 million times Working Temperature : -30C~+70C, Relative Humidity: 90%, no condensation Working Environments : Indoor, outdoor (with shelter)
Access control speed gate turnstile, automatic speed turnstile gate is designed with a slim and stylish look for narrow entry areas Access control speed gate turnstile JDSG-19 is designed with slim, elegant and stylish apperance and minimal footprint, operating In a smooth, fast and reliable way, ensuring a perfect balance between the stability of the equipment and aesthetics of the surrounding interior needs. By using the advanced detection system, it can accurately tracks the passage of a single authorised user and effectively prevents fraudulent or unauthorised entry. Becausee of the unque design and rapid throughput, speed optical turnstile gate JDSG-19 is often installed in upscale corporate lobbies, high rise building entrances, luxury apartment complexes, universities, and anywhere else where autonomous entry and aesthetics are important. Access control speed gate turnstile JDSG-19 is an efficient crowd control solution with the combination of a high bidirectional flow of passage with high levels of security, effectively organizing passageways with increased requirements for design and comfort of passage. Finally, it provides single directional and bi-directional entry control, and automatically release the passage for free access in case of power failure or emergency. Access Control Speed Gate Turnstile Featurers 1. Accurate tailgating detection 2. Precision controlled movement of obstacles and detection of all obstructions 3. Reinforced detection to enhance user protection and manage passage of luggage 4. Obstacles automatically open to free the passage in case of power failure 5. Minimal footprint for maximum throughput 6. Unique detection algorithm prevents fraudulent entry with greater user safety 7. Smooth integration of proximity, magnetic card readers, biometric scanners and other user authentication systems 8. Transparent and elegant design 9. High-density matrix of infrared beams follows usersâ?? progression through the gate 10.The swing panels are available in heights of 1.2m, 1.4m or 1.8m to provide increasing levels of security as required. Access Control Speed Gate Turnstile Applications Offices Banks Public institutions Data centres Sensitive sites Schools and universities Access Control Speed Gate Turnstile Parameters Housing Material : #304 stainless sheet Dimension: 1500 x 160 x 1020mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 600~900mm Drive Motor: DC 24V brushless motor or servo motor Pass Speed: 35 ~45 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Gate open when power failure: Yes Open Time: 0.2 second Life Cycle: 5 million times Working Temperature: -30 C~+70 C Working Environments: Indoor, outdoor (with shelter)
Stylish design entry control optical speed turnstile, optical speed gate turnstile virtually blends infinite aesthetics within architectural interior needs Entry control optical speed turnstile JDSG-22 is sturdy, durable and high-intensity impact resistent, designed with a slim and stylish look for narrow entry areas where autonomous entry and aesthetics are important. Speed optical turnstile JDSG-22 runs in a smooth, fast and reliable way, providing an ideal contactless solution for access control and comfortable passage in an intense flow of people, avoiding queues at the entrance and exit. The standard (600mm) and wide (900mm) lane widths are available to meet different application requirements, and the height of tempered glass panels 1.0m, 1.2m or 1.8m are available to provide increasing levels of security as required. Entry Control Optical Speed Turnstile Featurers 1. Accurate tailgating detection 2. Precision controlled movement of obstacles and detection of all obstructions 3. Reinforced detection to enhance user protection and manage passage of luggage 4. Obstacles automatically open to free the passage in case of power failure 5. Minimal footprint for maximum throughput 6. Unique detection algorithm prevents fraudulent entry with greater user safety 7. Smooth integration of proximity, magnetic card readers, biometric scanners and other user authentication systems 8. Transparent and elegant design 9. High-density matrix of infrared beams follows usersâ?? progression through the gate 10.The swing panels are available in heights of 1.2m, 1.4m or 1.8m to provide increasing levels of security as required. Entry Control Optical Speed Turnstile Applications Offices Banks Public institutions Data centres Sensitive sites Schools and universities Entry Control Optical Speed Turnstile Parameters Housing Material : #304 stainless sheet Dimension : 1400 x 120 x 980mm Power Supply : AC220V / AC110V, 50/ 60 Hz Channel Width : 600~900mm Drive Motor : DC 24V brushless motor or servo motor Pass Speed : 35 ~45 persons per minute Input Interface : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Gate open when power failure : Yes Open Time : 0.2 second Life Cycle : 5 million times Working Temperature : -30 C~+70 C Working Environments : Indoor, outdoor (with shelter)
Slim and stylish design fastlane turnstile, speedgate turnstile provides an ideal contactless solution for access control and comfortable passage Fastlane turnstile JDSG-23 is sturdy, durable and high-intensity impact resistent, designed with a slim and stylish look for narrow entry areas where autonomous entry and aesthetics are important. Fastlane optical turnstile JDSG-23 runs in a smooth, fast and reliable way, providing an ideal contactless solution for access control and comfortable passage in an intense flow of people, avoiding queues at the entrance and exit. The standard (600mm) and wide (900mm) lane widths are available to meet different application requirements, and the height of tempered glass panels 1.0m, 1.2m or 1.8m are available to provide increasing levels of security as required. Fastlane turnstile JDSG-23 can be configured to allow access in a single direction or bi-directionally depending on actual requirements and simply integrates various access control systems to support muliple verification methods. In addition, speedgate turnstile JDSG-23 is designed in compliance with the most stringent safety and security standards, and widely used in corporate lobbies, high rise building entrances, luxury apartment complexes, universities. Fastlane Turnstile Featurers 1. Accurate tailgating detection 2. Precision controlled movement of obstacles and detection of all obstructions 3. Reinforced detection to enhance user protection and manage passage of luggage 4. Obstacles automatically open to free the passage in case of power failure 5. Minimal footprint for maximum throughput 6. Unique detection algorithm prevents fraudulent entry with greater user safety 7. Smooth integration of proximity, magnetic card readers, biometric scanners and other user authentication systems 8. Transparent and elegant design 9. High-density matrix of infrared beams follows usersâ?? progression through the gate 10.The swing panels are available in heights of 1.2m, 1.4m or 1.8m to provide increasing levels of security as required. Fastlane Turnstile Applications Offices Banks Public institutions Data centres Sensitive sites Schools and universities Fastlane Turnstile Parameters Housing Material : #304 stainless sheet Dimension : 1400 x 120 x 980mm Power Supply : AC220V / AC110V, 50/ 60 Hz Channel Width: 600~900mm Drive Motor : DC 24V brushless motor or servo motor Pass Speed: 35 ~45 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface : RS485 Gate open when power failure: Yes Open Time: 0.2 second Life Cycle: 5 million times Working Temperature: -30 C~+70 C Working Environments: Indoor, outdoor (with shelter) #304 stainless sheet
Small footprint waist height turnstile gate drop arm barrier, drop arm barrier turnstile gate provides a clear path for the user as they navigate the passage Waist height turnstile gate drop arm barrier JDYZZ-4 is made of high quality stainless sheet and designed with intuitive colored LED lights guiding users from entry through the authorization and onto the secured side, providing a fast, durable, smooth way with low noise and low power consumption. By using an array of optical sensors to determine the number and direction of persons passing through the security turnstile lane, waist height drop arm barrier turnstile JDYZZ-4 efficiently controlles pedestrian access between public and secure areas, and the passage Is released for free access upon receiption of a valid open signal and closed automatically affter passage. The unauthorized person attempts to tailgate on a valid entry, or entry without authorization will be recognized and trigger sound alarm. Waist height turnstile gate drop arm barrier JDYZZ-4 is an efficient crowd control solution with the combination of a high bidirectional flow of passage with medium levels of security, effectively organizing passageways with increased requirements for design and comfort of passage. Finally, it provides single directional and bi-directional entry control, and automatically release the passage for free access in case of power failure or emergency. Waist Height Turnstile Gate Drop Arm Barrier Featurers 1. Visual graphics provide guidance to users 2. Superior unauthorized passage detection 3. Virtually maintenance free 4. Integrates easily with access control systems 5. Supports rapid throughput 6. Multiple operational modes including controlled passage, free passage and visitor 7. Quick and smooth motorized drop arm for bi-directional operation. 8. LED end displays indicate direction status 9. Provides a clear path for the user as they navigate the passage 10. Assures that only one person enters for each authorized credential Waist Height Turnstile Gate Drop Arm Barrier Applications Offices Banks Public institutions Data centres Commercial office buildings Government agencies Waist Height Turnstile Gate Drop Arm Barrier Parameters Housing Material: #304 stainless sheet Dimension: 1200 x 165 x 990mm Power Supply: AC220V / AC110V, 50/ 60 Hz Lane Width : 600mm Drive Motor : DC 24V brush motor Pass Speed: 40 persons per minute Input Interface : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication Interface: RS485 Rest Time after Power On: 3 seconds Open Time: 0.2 second Life Cycle: 3 million times Working Temperature: -30 C~+70 C Working Environments: Indoor, outdoor (with shelter)
#304 stainless drop arm motorised turnstile gate, drop arm security turnstile supports multiple operational modes including controlled passage, free passage and visitor Drop arm motorised turnstile gate JDYZZ-3 is made of high quality stainless sheet and designed with intuitive colored LED lights guiding users from entry through the authorization and onto the secured side, providing a fast, durable, smooth way with low noise and low power consumption. By using an array of optical sensors to determine the number and direction of persons passing through the security turnstile lane, It efficiently controlles pedestrian access between public and secure areas, and the passage Is released for free access upon receiption of a valid open signal and closed automatically affter passage. The unauthorized person attempts to tailgate on a valid entry, or entry without authorization will be recognized and trigger sound alarm. Drop arm motorised turnstile gate JDYZZ-3 is an efficient crowd control solution with the combination of a high bidirectional flow of passage with medium levels of security, effectively organizing passageways with increased requirements for design and comfort of passage. Finally, it provides single directional and bi-directional entry control, and automatically release the passage for free access In case of power failure or emergency. Drop Arm Motorised Turnstile Gate Featurers 1. Visual graphics provide guidance to users 2. Superior unauthorized passage detection 3. Virtually maintenance free 4. Integrates easily with access control systems 5. Supports rapid throughput 6. Multiple operational modes including controlled passage, free passage and visitor 7. Quick and smooth motorized drop arm for bi-directional operation. 8. LED end displays indicate direction status 9. Provides a clear path for the user as they navigate the passage 10. Assures that only one person enters for each authorized credential Drop Arm Motorised Turnstile Gate Applications Offices Banks Public institutions Data centres Commercial office buildings Government agencies Drop Arm Motorised Turnstile Gate Parameters Housing Material: #304 stainless sheet Dimension: 1200 x 165 x 990mm Power Supply: AC220V / AC110V, 50/ 60 Hz Lane Width: 600mm Drive Motor: DC 24V brush motor Pass Speed: 40 persons per minute Input Interface : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication Interface: RS485 Rest Time after Power On: 3 seconds Open Time: 0.2 second Life Cycle: 3 million times Working Temperature: -30 C~+70 C Working Environments : Indoor, outdoor (with shelter)
Stylish design sliding barrier optical turnstile, sliding optical turnstile gate virtually blends infinite aesthetics within architectural interior needs Sliding barrier optical turnstile JDPYZ-9 operates in a fast, accurate, stable and quiet way with low-power consumption, and a longer service life, which comes with a high transparent glass baffles (Max 1.8 meters), effectively preventing people from crawling or climing over, and designed with stylish apperance perftly blending into the aesthetics of the sorrounding interior. Becausee of the unique design and rapid throughput, optical sliding barrier turnstile JDPYZ-9 is an effecient contactless crowd control solution for upscale corporate lobbies, high rise building entrances, luxury apartment complexes, universities, and anywhere autonomous entry and aesthetics are important. Sliding barrier optical turnstile JDPYZ-9 monitors the pedestrians passing through the automatic turnstile lanes by photocells, which detect the direction and prevent closure as long as a pedestian or object Is within the secured area. In addition, sliding optical turnstile JDPYZ-9 will be closed automatically after the passage is cleared, and the tailgating attempts or entry without authorization will be dectected and trigger an alarm singnal. Finally, siding barrier optical turnstile JDPYZ-9 automatically opens to provide free passage in the event of power failure or in an emergency. Sliding Barrier Optical Turnstile Features 1. Intuitive approach detection 2. Precision controlled tempered glass obstacles 3. Designed in compliance with the most stringent safety and security standards 4. In case of emergency the obstacles can be unlocked with a simple push to automatically open 5. Electro-mechanical locking to withstand forced entry attempts 6. Glass obstacles up to 1800mm without or with straight or sloping overhang 7. Silent and smooth in operation 8. Smooth, swinging-motion glass barriers 9. Unique detection system accurately tracks the passage of a single authorised user 10. Stylish and flexible design able to virtually blend infinite aesthetics within architectural interior needs Sliding Barrier Optical Turnstile Applications Offices Banks Public institutions Data centres Sensitive sites Schools and universities Sliding Barrier Optical Turnstile Parameters Housing Material: #304 stainless sheet Dimension: 1400 x 350 x 980mm Power Supply: AC220V / AC110V, 50/ 60 Hz Lane Width: 500mm~550mm Drive Motor : DC 24V brushless motor Pass Speed : 35 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication Interface: RS485 Rest Time after Power On : 3 seconds
#304 stainless high sliding glass turnstile, sliding gate optical turnstile is designed with stylish apperance perftly blending into the aesthetics of the sorrounding interior. High sliding glass turnstile JDPYZ-7 is made of high quality stainless sheet and designed with intuitive colored LED lights guiding users from entry through the authorization and onto the secured side, providing a fast, durable, smooth way with low noise and low power consumption. By using an array of optical sensors to determine the number and direction of persons passing through the security turnstile lane, it efficiently controls pedestrian access between public and secure areas, and releases the passage for free access upon receiption of a valid open signal and close automatically affter passage. The unauthorized person attempts to tailgate on a valid entry, or entry without authorization will be recognized and trigger sound alarm. The baffle height of high sliding glass turnstile JDPYZ-7 can be max 1800mm to make climing over them more difficuty for high security, and designed with stylish and modern look meeting the latest architectural trends, and runing at a rather fast speed, high sliding glass turnstile JDPYZ-7 is widely used In upscale corporate lobbies, high rise building entrances, luxury apartment complexes, universities, and anywhere autonomous entry and aesthetics are important. High Sliding Glass Turnstile Features 1. Intuitive approach detection 2. Precision controlled tempered glass obstacles 3. Designed in compliance with the most stringent safety and security standards 4. In case of emergency the obstacles can be unlocked with a simple push to automatically open 5. Electro-mechanical locking to withstand forced entry attempts 6. Glass obstacles up to 1800mm without or with straight or sloping overhang 7. Silent and smooth in operation 8. Smooth, swinging-motion glass barriers 9. Unique detection system accurately tracks the passage of a single authorised user 10. Stylish and flexible design able to virtually blend infinite aesthetics within architectural interior needs High Sliding Glass Turnstile Applications Offices Banks Public institutions Data centres Sensitive sites Schools and universities High Sliding Glass Turnstile Parameters Housing Material: #304 stainless sheet Dimension: 1400 x 350 x 980mm Power Supply : AC220V / AC110V, 50/ 60 Hz Lane Width : 500mm~550mm Drive Motor : DC 24V brushless motor Pass Speed : 35 persons per minute Input Interface : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication Interface: RS485 Rest Time after Power On: 3 seconds Open Time : 1 second Life Cycle: 3 million times Working Temperature: -30 C~+70 C Working Environments: Indoor, outdoor (with shelter)
Waist height flap turnstile gate, access control flap turnstile cancel the access right if pedestrians do not pass through within pre-defined time Waist height flap turnstile gate JDYZ-19 provides bi-directional and unidirectional access and free passage modes, ensuring fast, smooth and reliable access for different applications. It comes with infrared sensors providing high detection accuracy, preventing clipping and collision and ensuring the safety of pedestrians. Any illegal intrusion or tailgating attempts will trigger a sound alarm. Furthermore, flap contactless turnsile gateJDYZ-19 offers quick and smooth motorized retractable wings for bi-directional operation in a fast, smooth and reliable way with low noise and energy saving. Waist height flap turnstile gate JDYZ-19 adopts a streamlined design with a more modern aesthetic to meet the latest architectural trends, widely used for corporate lobbies, office buildings, data centers, government facilities, stadiums. As quick throughput is available with them, securiry flap axess turnstile JDYZ-19 is often also implemented in subways and other public transportation terminals. Waist Height Flap Turnstile Gate Features 1. Easily integrates to access control and fire safety systems through dry contact 2. Forcibly enter or tailgating attempts will be prompted by audible & visible alerts 3. High performance and robustness 4. Unique design meets the latest architectural trends 5. Physical security improved with fast double retractable wings for immediate lane closure 6. Quick and smooth motorized retractable wings for bi-directional operation 7. Fast user throughput 8. In case of emergency, the flap turnstile arm will open automatically to allow free access 9. Obstacles automatically open to free the passage 10. Stable and efficient operation with lower noise Waist Height Flap Turnstile Gate Applications Company premises Power plants Industrial plants Government facilities Stadiums Airport and port areas Public transportation terminals Waist Height Flap Turnstile Gate Parameters Housing Material: #304 stainless sheet Dimension : 1600 x 300 x 1000mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 550mm Drive Motor : DC 24V brush motor Pass Speed: 40 persons per minute Input signal optional: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Arm drop when power failure: Yes Open Time : 0.2 second Life Cycle : 3 million times Working Temperature: -30 C~+70 C Working Environments: Indoor, outdoor (with shelter)
Retractable flap barrier, flap gate optical turnstile flexible integrates various access contro device with dry contact output Retractable flap barrier JDYZ-15 provides bi-directional and unidirectional access and free passage modes, ensuring fast, smooth and reliable access for different applications. It comes with infrared sensors providing high detection accuracy, preventing clipping and collision and ensuring the safety of pedestrians. Any illegal intrusion or tailgating attempts will trigger a sound alarm. Furthermore, optical flap turnsile JDYZ-15 offers quick and smooth motorized retractable wings for bi-directional operation in a fast, smooth and reliable way with low noise and energy saving. Retractable flap barrier JDYZ-15 adopts a streamlined design with a more modern aesthetic to meet the latest architectural trends, widely used for corporate lobbies, office buildings, data centers, government facilities, stadiums. As quick throughput is available with them, flap type touchless turnstile JDYZ-15 is often also implemented in subways and other public transportation terminals. Retractable Flap Barrier Features 1. Easily integrates to access control and fire safety systems through dry contact 2. Forcibly enter or tailgating attempts will be prompted by audible & visible alerts 3. High performance and robustness 4. Unique design meets the latest architectural trends 5. Physical security improved with fast double retractable wings for immediate lane closure 6. Quick and smooth motorized retractable wings for bi-directional operation 7. Fast user throughput 8. In case of emergency, the flap turnstile arm will open automatically to allow free access 9. Obstacles automatically open to free the passage 10. Stable and efficient operation with lower noise Retractable Flap Barrier Applications Company premises Power plants Industrial plants Government facilities Stadiums Airport and port areas Public transportation terminals Retractable Flap Barrier Parameters Housing Material : #304 stainless sheet Dimension : 1400 x 280 x 980mm Power Supply : AC220V / AC110V, 50/ 60 Hz Channel Width : 550mm Drive Motor : DC 24V brush motor Pass Speed : 40 persons per minute Input signal optional : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Arm drop when power failure : Yes Open Time : 0.2 second Life Cycle : 3 million times Working Temperature : -30C~+70C Working Environments : Indoor, outdoor (with shelter)
Modern design flap turnstile gate, automatic flap gate turnstile is reliable and affordable with fast throughput Flap turnstile gate JDYZ-23 provides a fast and smooth way to facilitate the authorized people entry secured areas and suites well the applications requiring ultra high speed access and medium levels of security. Flap gate turnstile JDYZ-23 is supplied with intelligent infrared sensors providing high detection accuracy to effectively prevent clipping and collision, ensuring the safety of pedestrians. If a person attempts to enter without authorization, a visual or audible alert is triggered, meanwhile, automatic flap gate turnstile JDYZ-23 will refuse to open along with the alerts to effectively deny access. Flap turnstile gate JDYZ-23 supports single directional or bi-directional access and flexible integrate various access contro device with dry contact output. In addition, flap barrier gate turnstile JDYZ-23 will cancle the access right If pedestrians do not pass through within pre-defined time, and the passing time is adjustable for different requirements. In case of power failure, the passage will be released automatically for a free access. Flap Turnstile Gate Features 1. Easily integrates to access control and fire safety systems through dry contact 2. Forcibly enter or tailgating attempts will be prompted by audible & visible alerts 3. High performance and robustness 4. Unique design meets the latest architectural trends 5. Physical security improved with fast double retractable wings for immediate lane closure 6. Quick and smooth motorized retractable wings for bi-directional operation 7. Fast user throughput 8. In case of emergency, the flap turnstile arm will open automatically to allow free access 9. Obstacles automatically open to free the passage 10. Stable and efficient operation with lower noise Flap Turnstile Gate Applications Company premises Power plants Industrial plants Government facilities Stadiums Airport and port areas Public transportation terminals Flap Turnstile Gate Parameters Housing Material: #304 stainless sheet Dimension: 1400 x 300 x 980mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 550mm Drive Motor: DC 24V brush motor Pass Speed: 35~40 persons per minute Input signal optional: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface: RS485 Arm drop when power failure: Yes Open Time: 0.2 second Life Cycle: 3 million times Working Temperature : -30 C~+70 C Working Environments : Indoor, outdoor (with shelter)
Outdoor swing gate turnstile, optical swing barrier turnstile is designed with modern look modern bleding into the aesthetics of the surrounding space Outdoor swing gate turnstile JDBZ-23 adopts reliable advanced brushless DC motor ensuring stable operation with low noise, and DC dynamic coding control technology for guranting silent control and turnstile stability in variable speed movement. It offers multiple operational modes including controlled passage, free passage and visitor, by which pedestrian traffic will be efficiently managed in different situations. The conbination of a fast throughput, superior barrier deterrence and optical tailgate detection enables swing barrier turnstile JDBZ-28 compatible with any upscale business or institutional environment. Outdoor swing gate turnstile JDBZ-23 offeres bi-directional entry control in conjunction with access control device with dry contact output, and automatically open to release the passage for free access in case of power failure or in an emergency. Becausee of its elegent and stylish design as well as fast throughput, automaticl swing turnstile JDBZ-23 is used widely to various applications such as company foyers, data centers, government buildings and fitness centers. Outdoor Swing Gate Turnstile Features 1. Smooth and fast opening of barriers 2. Solution for disabled and trolley access 3. Free egress in emergencies or loss of power 4. Quick and precise panel movement and alignment 5. Motorized panels open quickly and smoothly away from the user 6. Slim cabinet allows optical turnstile use in compact spaces 7. Upscale look suitable for any premium lobby 8. Run more smoothly and stop quickly after being blocked 9. Streamlined design with a more modern aesthetic 10. Adopt more reasonable electric control and layout to improve the protection level Outdoor Swing Gate Turnstile Applications Subway Large venues Stadium Commercial buildings Fitness center Outdoor Swing Gate Turnstile Parameters Housing Material : #304 stainless sheet Dimension : 1400 x 200 x 980mm Power Supply : AC220V / AC110V, 50/ 60 Hz Channel Width : 600~900mm Drive Motor : DC 24V brushless motor Pass Speed : 30 ~35 persons per minute Input Interface : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Gate open when power failure : Yes Open Time : 0.2 second Life Cycle : 3 million times Working Temperature : -30 C~+70 C Working Environments : Indoor, outdoor (with shelter)
Pedestrian turnstile swing barrier, automatic swing barrier turnstile operates in a smooth, fast and reliable way with low noise and low power consumption Pedestrian turnstile swing barrier JDBZ-25 is designed with slim, elegant and stylish apperance, operating in a smooth, fast and reliable way with low noise and low power consumption. As an effective crowd control solution for the applications requiring rapid throughput and modern design bleding into the aesthetics of the surrounding space, swing pedestrian turnstile gate JDBZ-25 is often installed in upscale corporate lobbies, high rise building entrances, luxury apartment complexes, universities, and anywhere else where autonomous entry and aesthetics are important. Pedestrian turnstile swing barrier gate JDBZ-25 is flexibly compatible with all access control systems with dry contact output, such as the RFID card system, face recognition, temperature checker system, coin operated system, bar code system, ensuring one person, one passage each time. Finally, swing pedestrian turnstile gate JDBZ-25 provides single directional and bi-directional entry control, and automatically release the passage for free access In case of power failure or emergency. Pedestrian Turnstile Swing Barrier Features 1. Smooth and fast opening of barriers 2. Solution for disabled and trolley access 3. Free egress in emergencies or loss of power 4. Quick and precise panel movement and alignment 5. Motorized panels open quickly and smoothly away from the user 6. Slim cabinet allows optical turnstile use in compact spaces 7. Upscale look suitable for any premium lobby 8. Run more smoothly and stop quickly after being blocked 9. Streamlined design with a more modern aesthetic 10. Adopt more reasonable electric control and layout to improve the protection level Pedestrian Turnstile Swing Barrier Applications Subway Large venues Stadium Commercial buildings Fitness center Pedestrian Turnstile Swing Barrier Parameters Housing Material: #304 stainless sheet Dimension: 1400 x 185 x 980mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 600~900mm Drive Motor: DC 24V brushless motor Pass Speed:30 ~35 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface: RS485 Gate open when power failure : Yes Open Time: 0.2 second Life Cycle: 3 million times Working Temperature: -30 C~+70 C Working Environments: Indoor, outdoor (with shelter)
Unique design tripod turnstile gate, automatic tripod barrier for crowd control solutions from Chinese automatic turnstiles manufacturer & supplier Tripod turnstile gate JDGD-17 is one of our morden- look crowd control solutions for securing entrances with high pedestrian flow,which is reliable, convinient and easy to use, and compatible with any validation system on the market (biometrics, fingerprints, QR scaner, facial recognition). The LED notification lights are fixed onto both end to give notice of presented credential status to pedestrians, and any intrusion and tailgating attempts will activate alarm. The advanced positioning technology is used to precisely control the movement position, ensuring the tripod turnstile gate runs more accurately and stably. As an idea crowd control solution, the waist height access control turnstile JDGD-17 is suitable for any applications requiring effecitive crowd management such as office buidings, administrative buildings, athletic facilities, university facilities. In addition, in case of emergency or power failure, the horizontal arm will collapse to allow a clear passage. Tripod Turnstile Gate Features 1. Integration possible with virtually any access solution 2. Field configurable for single direction or bi-directional operation 3. Regulates the flow of people with ease, even during the busiest periods of the day 4. Safe, controlled rotation and self-centering arm rotation 5. Free egress in emergencies or loss of power 6. The passing time can be freely set, and it will be locked immediately after the predetermined time. 7. Easy installation on finished floor surfaces, optional on unfinished surfaces 8. Extremely versatile operational features 9. functional, quick and space-saving 10.Easy, safe and fast to use Tripod Turnstile Gate Applications Athletic facilities Cafeterias Amusement parks Stadiums Office buildings Residential area Fitness center Tripod Turnstile Gate Parameters Housing Material : 304 stainless sheet Dimension : 1400 x 280 x 980 mm Power Supply : AC220V / AC110V, 50/ 60 Hz Channel Width : 550mm Arm Turning Angle : 120 Pass Speed : 35 persons per minute Input signal optional : Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Arm drop when power failure : Yes Open Time : 0.2 second Life Cycle : 5 million times Working Temperature : -30 C~+70 C Working Environments : Indoor, outdoor Package : export standard carton
Fashion design access control tripod turnstile, automatic tripod turnstile with life span of 5 million times from Chinese automatic tripod turnstile supplier Access control tripod turnstile JDGD-22 is one of our morden- look crowd control solutions for securing entrances with high pedestrian flow,which is reliable, convinient and easy to use, and compatible with any validation system on the market (biometrics, fingerprints, QR scaner, facial recognition). The LED notification lights are fixed onto both end to give notice of presented credential status to pedestrians, and any intrusion and tailgating attempts will activate alarm. The advanced positioning technology is used to precisely control the movement position, ensuring the Waist high turnstiles run more accurately and stably. As an idea crowd control solution, access control tripod turnstile JDGD-22 is suitable for any applications requiring effecitive crowd management such as office buidings, administrative buildings, athletic facilities, university facilities. In addition, in case of emergency or power failure, the horizontal arm will collapse to allow a clear passage. Aceess Control Tripod Turnstile Features 1. Integration possible with virtually any access solution 2. Field configurable for single direction or bi-directional operation 3. Regulates the flow of people with ease, even during the busiest periods of the day 4. Safe, controlled rotation and self-centering arm rotation 5. Free egress in emergencies or loss of power 6. The passing time can be freely set, and it will be locked immediately after the predetermined time. 7. Easy installation on finished floor surfaces, optional on unfinished surfaces 8. Extremely versatile operational features 9. functional, quick and space-saving 10.Easy, safe and fast to use Aceess Control Tripod Turnstile Applications Athletic facilities Cafeterias Amusement parks Stadiums Office buildings Residential area Fitness center Aceess Control Tripod Turnstile Parameters Housing Material : 304 stainless sheet Dimension: 1400 x 280 x 980 mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 550mm Arm Turning Angle : 120�° Pass Speed: 35~40 persons per minute Input signal optional: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction : Bi-directional Communication interface : RS485 Arm drop when power failure: Yes Open Time : 0.2 second Life Cycle: 5 million times Working Temperature: -30�°C~+70�°C Working Environments: Indoor, outdoor Package: export standard carton