Smart 2.4 inch tft lcd door viewer kit 100 degree digital doorbell camera Door viewer.Jpg Features of doorbell camera : 1.Diy: doorbell camera is easy for you to install: just need 3-5 minutes. 2.2.4 inch lcd monitor and cat's eye unit. 3.100degrees of visual angle. 4. Users are not limited: even the old with poor eyesight or the little kids. 5. High-resolution image: 300, 000 pixel provide clear and vivid image, lcd screen superior to traditional door-bell. 6. Super province electricity: taking two aa batteries and special power management. 7. Compared with ordinary cat's eye, it is more practicality, safety. 8. Monitor with battery electric quantity display function. 9.15s automatic shutdown, users need not worry about battery runs out quickly if forgetting shutdown. 10.Fast boot:without waiting, a boot will be able to display images. Parameter of doorbell camera : 1.Can used for differently-thick door(35mm-50mm), mounting hole diameter:14mm 2. Camera: 300, 000 cmos illuminated sensor pixel. 3. Monitor: 2.4 inch tft lcd display resolution: 240xrgbx320 4.Power consumption.
Factory sale Active IR triple beam detector-ABE-150 Brand: ALEAN Triple Beam Detecting range: 150M Max 1.Selectable frequency 4 channels : Stacking, Straight line, Square or other various applications are allowed. 2.Professional waterproof design with rubber seal around, anti-rain, snow, dew, mist, frost etc, IP65 ingress protection. 3.Triple beam: interval of 3 beams is 20cm, improves the ability of anti-false alarms. 4.Intelligent temperature control system, pre-set heater terminals. 5.Environment adaptive function, according to external environment changes, timely adjust to adapt the state, reduce the false alarms rate. 6.AGC circuit, the detector will automatically increase sensitivity when faced harsh environment. 7.Horizontal ±90° / vertical ±10° optical angle can be easy to adjust. 8.LED display signal grade for easy alignment. 9.Adopt digital DIP technology,frequency,sensitivity,indicator and operation power can be adjusted through DIP switches. Model ABE-50 ABE-100 ABE-150 ABE-200 ABE-250 Detection Range Outdoor 50m 100m 150m 200m 250m Indoor 150m 300m 450m 600m 750m Maximum Arrival Distance 300m 600m 900m 1200m 1500m Detection Method Simultaneous interruption of 3 infrared beams Interruption Time 50msec, 100msec,300msec,700msec (selectable) Beam frequency 4 channel selectable Power Supply DC12~24V; AC11~18V Current Consumption 70mA max 80mA max 90mA max 100mA max 110mA max Alarm Period 2sec (±1) Alarm Output 1C. relay output (AC/DC30V, 0.5A max) Tamper Switch NC, opens when cover removed Operating Temperature -25â?? to +55â?? Environment Humidity 95% max Alignment Angle Horizontal 180°(±90°), Vertical 20°(±10°) Mounting Wall or Pole Protection Degree IP65 Material PC engineering plastic Dimension (L*W*H) 92*90*291mm Weight (Transimtter and Receiver) 1500g Heaters (additional purchase) Voltage 12V Current 200mA max Temperature +70â?? Note: When environment termperature lower than -20â??, please use heaters to ensure normal working. Heater is non-polarized.
Two-dimensional code smart phone access control! Smart phone = key Smart phone open door, new access control mode Two-dimensional code scanning, effective visitor management Elevator linkage, VIP experience Anytime anywhere, realize remote open door -
6,12, 18 detecting zones Indoor use model: AT-IIIA,IIIC,IIID Waterproof model: AT-300A, 300B Two or four LED light bars Sensitivity adjustable from Level 0 to 299 High: Can detect a clip Shockproof to avoid false alarm LED or LCD display Sound and light alarm
With belt holster, large detect zone Dimension of unit: 410 * 80 * 420 mm (l*w*h) Net weight of unit: 400 g Operate frequency: low Operating temperature: -5to +55 Operate current: < 50ma Power: 9v (6f22) alkaline battery , operate voltage 7v-9v Alarm: video led & audio/ video led & vibration Sensitivity adjust knob Sensitivity level: detect pistol at 90mm, six inches knife At 60mm, razor blade at 30mm, pin at 10mm Packing: 25pcs/ctn, n.W.: 10kg/ctn , g.W:14kg/ctn Dimension of packing: 530 *510 * 290 mm
Multi entrance management model, management, and statistics of entering and exiting vehicles Auto digital line scan, high-resolution undercarriage imaging. High automation, easy to be used Applicable to variety of vehicles, wide vision. Test will be completed during the vehicle maneuvers without stopping, adapted to different speed. Undercarriage image can be stored, retrieved, searched or compared with other images. A variety of image processing methods: enlarge, stretching and cutting. A variety of image processing methods: enlarge, stretching and cutting. Option of automatic number plate recognition system available, associative storage of various vehicle information and undercarriage images
Capacitance fingerprint collector(176*176 pixels) High quality, high security, high efficiency of autonomous recognition algorithm Usb, uart and spi three kinds of interfaces 0.001% far0.1% frrlevel 3 3000pcs fingerprint max. 10 millions cycles wear to tear 0.6n, ±15kv esd-proof air discharge Support self-learning function, 360 degrees casual press Support the human body induction waking-up Led orange lighting in fingerprint collecting process, and led green lighting in recognition passed process Support windows, android 4.0 above version and scm running Standard dimensions33.5*20.5mm
Lcd screen: 8'' 800*1280 ips lcd screen Type of touch panel: g+g capacitive multi-touch panel Os: android 5.1 Cpu: qual core Ram: 1gb Nand flash: 8gb Camera: front 2mp Battery: 3.7v /6000mah Wi-fi: 802.11b/g/n 2g: built-in 2g (gsm 850/900/1800/1900) 3g: built-in 3g wcdma 2100 (optional: 850/1900) 4g: built-in 4g b1/b2/b3/b7/b20/b40 2d code scanners: yes Keyboard: yes Nfc: yes Fingerprint: yes Bluetooth: yes 4.0 Gps: yes Fm: yes G-sensor: yes
USB head: male and female optional USB port: USB 2.0/micro USB Workable with: DeskPC Tablet mobile phone Support: Windows OS/Android OS/Linux Fingerprinter: TCS 1/TCS2/FPC1011/optical Resolution: 366DPI/508DPI/more Auto driver: yes SDK support: ANSI378/ISO19794/PHP USB head: male and female optional USB port: USB 2.0/micro USB Workable with: desk PC tablet mobile phone Supports: Windows OS/Android OS/Linux Resolution: 508DPI Auto driver: yes SDK supports: ANSI378/ISO19794/PHP
Sensing Area: 8*8 mm Sensor pixel size: 50*50 um Special resolution: 508 DPI ADC Pixel resolution: 8 bits(Gray scale) Sensor color: Matte Black Pencil hardness: 6 H(@500g) RCA Abrasion Wear: 200 cycle(@175g) Interface: USB/GPIO Interface type: 13pin,0.8mm pitch,ACF connector Supply voltage: 3.0-3.6 V FRR: 2% FAR: 1/10000
Fingerprint unlocking as padlock type Support OTA Support capacitive fingerprint collector Open waking-up via pull padlock Support LED function status indication Support fingerprint 500pcs above LED indicating Electricity Remind Bull-in 500mAH Lithium battery and can be used 1 year above Mainly apply to bank verification system Capacitance fingerprint collectorA288(208*288pixels) High quality, high security, high efficiency of autonomous recognition algorithm USB,UART and SPI three kinds of interfaces 0.001% FAR0.1% FRRLevel 3,up to Level 5 3000pcs Fingerprint Max. 10 millions cycles Wear to tear @ 0.6N,±15KV ESD-proof @ air discharge Support self-learning function,360 degrees casual press Support the human body induction waking-up Support Windows, Android 4.0 above version and SCM running Standard dimensions33.5*20.5MM
-Capacitance fingerprint collector(256*360pixels) -High quality,high security,high efficiency of autonomous recognition algorit -USB,UART and SPI three kinds of interfaces -0.001%FAR,0.1%FRR(Level 3) -3000pcs Fingerprint Max -10 millions cycles Wear to tear @0.6N,±15KV ESD-proof@air discharge -Support self-learning function,360 degrees casual press -Support the human body induction waking-up -Support Windows,Android 4.0 above version and SCM running -Standard dimensions:33.5*20.5MM -Capacitance fingerprint collector(152*200pixels) -High quality,high security,high efficiency of autonomous recognition algorit -USB,UART and SPI three kinds of interfaces -0.001%FAR,0.1%FRR(Level 3) -3000pcs Fingerprint Max -10 millions cycles Wear to tear @0.6N,±15KV ESD-proof@air discharge -Support self-learning function,360 degrees casual press -Support the human body induction waking-up -Support Windows,Android 4.0 above version and SCM running -Standard dimensions:33.5*20.5MM
1, the semiconductor fingerprint, to achieve a fingerprint built-in machine, fingerprint identification unlock read information. 2, hardware shell. 3, wireless network transmission 802.1.b / g / n, wireless way to connect mobile phones, PC, tablet and other equipment 4, application scenarios: office, conference, confidential file storage, data sharing. 5, compared to the existing market products, can also be connected online 5-8 people to share information
-QuadCore CPU -5" IPS Panel G+G TP -Andriod OS -TCS2 or TCS1 Finger printer Sensor -Battery 4000-10000 mAh -Built-in 3G NFC -BankCard Reader Optional -58mm Built-in Printer -1D 2D Barcode Scanner -ISO/ANSI SDK Supporting -FBI Standard
Product Name: PD202 American AuthenTec TCS1 fingerprint collector Conform to American FBI standard, mainly apply to ID verification Capacitance fingerprint collector(256*360 pixels) High quality, high security, high efficiency of autonomous recognition algorithm USB, UART and SPI three kinds of interfaces 0.001% FAR�0.1% FRR�Level 3, up to Level 5� 3000pcs Fingerprint Max. 10 millions cycles Wear to tear @ 0.6N,±15KV ESD-proof @ air discharge Support self-learning function,360 degrees casual press Support the human body induction waking-up Support Windows, Android 4.0 above version and SCM running Standard dimensions�33.5*20.5MM Product Name: PD302 American AuthenTec TCS2 fingerprint collector Mainly apply to bank verification system Capacitance fingerprint collector(208*288pixels) High quality, high security, high efficiency of autonomous recognition algorithm USB, UART and SPI three kinds of interfaces 0.001% FAR�0.1% FRR�Level 3, up to Level 5� 3000pcs Fingerprint Max. 10 millions cycles Wear to tear @ 0.6N,±15KV ESD-proof @ air discharge Support self-learning function,360 degrees casual press Support the human body induction waking-up Support Windows, Android 4.0 above version and SCM running Standard dimensions�33.5*20.5MM Product Name: PD006 Sweden FPC1020 fingerprint collector Capacitance fingerprint collector(192*192pixels) High quality, high security, high efficiency of autonomous recognition algorithm USB, UART and SPI three kinds of interfaces 0.001% FAR�0.1% FRR�Level 3� 3000pcs Fingerprint Max. 10 millions cycles Wear to tear @ 0.6N,±15KV ESD-proof @ air discharge Support self-learning function,360 degrees casual press Support the human body induction waking-up Support Windows, Android 4.0 above version and SCM running Standard dimensions�33.5*20.5MM Product Name: PD601 Capacitance fingerprint collector(192*192 pixels) High quality, high security, high efficiency of autonomous recognition algorithm USB, UART and SPI three kinds of interfaces 0.001% FAR�0.1% FRR�Level 3� 3000pcs Fingerprint Max. 10 millions cycles Wear to tear @ 0.6N,±15KV ESD-proof @ air discharge Support self-learning function,360 degrees casual press Support the human body induction waking-up Support Windows, Android 4.0 above version and SCM running Standard dimensions�33.5*20.5MM Product Name: PA00I Optical fingerprint collector (256*360 pixels) Infrared optics dark background collecting, anti-interference effect Resolving residual fingerprint is valid High quality, high security, high efficiency of autonomous recognition algorithm USB, UART and SPI three kinds of interfaces 0.001% FAR�0.1% FRR�Level 3� 3000pcs Fingerprint Max. 10Support self-learning Support the human body induction waking-up Support Windows, Android 4.0 above version and SCM running
1, hardware configuration: QS808 fingerprint identification chip, TCS2 capacitive touch panel, blue light, USB interface. 2, the software configuration: embedded software 3, the use of the scene: office, government, customs, hospitals. 4 support Andrews system and Windows system.
-Optical fingerprint collector(256*360pixel) -Infrared optical dark background collecting,anti-interference effect -Resolving residual fingerprint is valid -High quality,high security,high efficiency of autonomous recognition algorithm -USB,UART and SPI three kinds of interfaces -0.001%FAR,0.1%FRR(Level 3) -3000pcs Fingerprint Max -10Support self-learning -Support the human body induction waking-up -Support Windows,Android 4.0 above version and SCM running
HYF/Herofun PD601 -Capacitance fingerprint collector(192*192pixels) -High quality,high security,high efficiency of autonomous recognition algorithm -USB,UART and SPI three kinds of interfaces -0.001%FAR,0.1%FRR(Level 3) -3000pcs Fingerprint Max -10 millions cycles Wear to tear @0.6N,±15KV ESD-proof@air discharge -Support self-learning function,360 degrees casual press -Support the human body induction waking-up -Support Windows,Android 4.0 above version and SCM running -Standard dimensions:33.5*20.5MM HYF/Herofun PD706 -Capacitance fingerprint collector(152*200pixels) -High quality,high security,high efficiency of autonomous recognition algorithm -USB,UART and SPI three kinds of interfaces -0.001%FAR,0.1%FRR(Level 3) -3000pcs Fingerprint Max -10 millions cycles Wear to tear @0.6N,±15KV ESD-proof@air discharge -Support self-learning function,360 degrees casual press -Support the human body induction waking-up -Support Windows,Android 4.0 above version and SCM running -Standard dimensions:33.5*20.5MM HYF/herofun PDAOA -Capacitance fingerprint collector(208*288pixels) -High quality,high security,high efficiency of autonomous recognition algorithm -USB,UART and SPI three kinds of interfaces -0.001%FAR,0.1%FRR(Level 3) -3000pcs Fingerprint Max -10 millions cycles Wear to tear @0.6N,±15KV ESD-proof@air discharge -Support self-learning function,360 degrees casual press -Support the human body induction waking-up -Support Windows,Android 4.0 above version and SCM running -Standard dimensions:33.5*20.5MM
Suprema biostation time attendance system from screen check is designed with the latest technology to offer accurate and reliable fingerprint recognition and employee tracking. The various biometric access control systems that we offer include:
Our safety lockout padlock is made from reinforced nylon body and triple-coated hardened steel shackle. Shackle: length 38mm. Diameter 6mm. Material: A3 steel. Lock body: material nylon. a) Widely used in chemical, electrical, automobile industry, etc. b) Easily to be carried c) With rewritable warning signs. Wording can be custom made d) Key Retaining Feature (When the shackle is open, the key can not be removed) e) High Security 12 pin cylinder lock, up to 400000pcs different locking mechanisms.
