GOOD CLEAN BBQ FROM COCONUT DISCOVER
100% from coconut
Faster & easier ignition, faster priming.
Does not contain harmful chemicals, does not produce harmful gases harmful to health. Coconut charcoal is also spark-free, ensuring a safe and clean BBQ experience.
Safe: no sparks,
Long burning time 3-4 hours.
High heat & does not change until the end
Save electricity 30 - 50% compared to the wharf.
High heat so when baking food cooks evenly & retains the flavor of baked goods for better food.
Uses of coconut charcoal:
used in : cooking, baking & roasting
Drying agricultural products: dried fruits, coffee, cashew nuts
For the first metacarpophalangeal joint, interphalangeal joint and acute arthritis, wrist sprain, synovitis, carpal navicular fracture fixation.
325*185*3.2mm
LOW TEMPERATURE THERMOPLASTIC SHEET
Product features:
Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature.
It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability.
Scope of application:
1. Fixation after reduction of fractures and joint dislocations
2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries
3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor
metastasis or after debridement
4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed
5. Fixation after burns and other plastic surgery operations
6. Production and application of rehabilitation braces and orthoses
7. Posture placement and fixation during radiotherapy
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT.
Interested Buyer may kindly send their LOI to me to enable me to move forward.
The rate is $415 to $430 on CIF basis; any safe port in the world.
Do contact me at the earliest.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT.
Interested Buyer may kindly send their LOI to me to enable me to move forward.
The rate is $415 to $430 on CIF basis; any safe port in the world.
Do contact me at the earliest.
Diesel EN590 (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.
Petroleum coke, abbreviated coke or petcoke, is a final carbon-rich solid material that derives from oil refining, and is one type of the group of fuels referred to as cokes. Petcoke is the coke that, in particular, derives from a final cracking process a thermo-based chemical engineering process that splits long chain hydrocarbons of petroleum into shorter chains that takes place in units termed coker units. (Other types of coke are derived from coal.) Stated succinctly, coke is the carbonization product of high-boiling hydrocarbon fractions obtained in petroleum processing (heavy residues). Petcoke is also produced in the production of synthetic crude oil (syncrude) from bitumen extracted from Canada's oil sands and from Venezuela's Orinoco oil sands.
In petroleum coker units, residual oils from other distillation processes used in petroleum refining are treated at a high temperature and pressure leaving the petcoke after driving off gases and volatiles, and separating off remaining light and heavy oils. These processes are termed coking processes, and most typically employ chemical engineering plant operations for the specific process of delayed coking.
This coke can either be fuel grade (high in sulfur and metals) or anode grade (low in sulfur and metals). The raw coke directly out of the coker is often referred to as green coke. In this context, green means unprocessed. The further processing of green coke by calcining in a rotary kiln removes residual volatile hydrocarbons from the coke. The calcined petroleum coke can be further processed in an anode baking oven to produce anode coke of the desired shape and physical properties. The anodes are mainly used in the aluminium and steel industry.
Petcoke is over 80% carbon and emits 5% to 10% more carbon dioxide (CO2) than coal on a per-unit-of-energy basis when it is burned. As petcoke has a higher energy content, petcoke emits between 30 and 80 percent more CO2 than coal per unit of weight. The difference between coal and coke in CO2 production per unit of energy produced depends upon the moisture in the coal, which increases the CO2 per unit of energy heat of combustion and on the volatile hydrocarbons in coal and coke, which decrease the CO2 per unit of energy.
Product: Green Petcoke
Product Origin: seller to advise. Must be of non- sanctioned origin
Minimum order Quantity: 10,000 MT
Sulfur content: 3% max
Volatility: between 3% and 10%
max Size: 30mm max
Payment Terms: 100% LC at Sight.
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles. Its parameters include density at 15C (typically at this temperature it will have a density of 0.856kg/m3 with a minimum of 0.82kg/m3 required), a typical 0.1% carbon residue value (where the maximum permitted for this grade is 0.3%). The minimum flashpoint (the lowest temperature at which the fuel produces vapour that is an ignitable mixture in air near the surface of the liquid) is 56C.
