Roof clay tiles , clay floor tiles , special products in natural and glazed finishes.
Wooden Furniture, Rustic And Vintage Furniture, Pine Furniture, Mdf Furniture, Home Decor..
Carpet and recycled materials.
Handmade rugs & carpets.
Handmade soaps.
Elastomer with maximum resistance to high temperatures, resists exposure to the outside in extreme climates, highly resistant to ozone. Maximum resistance to oxygenated solvents such as ketones, alcohols, aldehydes, ethers and esters. Characteristics: Rubber: EPDM Hardness: 60-65 shore A Strenght: 650 PSI Elongation: 500% Temperature range: -25C to140C Oil: Bad Acid: Good Weather: Excellent Abrasion: Regular Lenght: 92 cm (3.01 ft) Width: 79 cm (2.59 ft) Height: 5.08 (2 inc) How to use: -Put soap and water solution (preferably foamy soap) on the mat surface and clean the shoes for 20 seconds on the mat. -Dry the shoes on a towel or dry carpet to remove moisture from the shoes.
Elastomer with maximum resistance to high temperatures, resists exposure to the outside in extreme climates, highly resistant to ozone. Maximum resistance to oxygenated solvents such as ketones, alcohols, aldehydes, ethers and esters. Characteristics: Rubber: EPDM Hardness: 60-65 shore A Strenght: 650 PSI Elongation: 500% Temperature range: -25C to140C Oil: Bad Acid: Good Weather: Excellent Abrasion: Regular Lenght: 75 cm (2.46 ft) Width: 39 cm (1.27 ft) Height: 5.08 cm (2 inch) How to use: -Put soap and water solution (preferably foamy soap) on the mat surface and clean the shoes for 20 seconds on the mat. -Dry the shoes on a towel or dry carpet to remove moisture from the shoes.
Elastomer with maximum resistance to high temperatures, resists exposure to the outside in extreme climates, highly resistant to ozone. Maximum resistance to oxygenated solvents such as ketones, alcohols, aldehydes, ethers and esters. Characteristics: Rubber: EPDM Hardness: 60-65 shore A Strenght: 650 PSI Elongation: 500% Temperature range: -25C to140C Oil: Bad Acid: Good Weather: Excellent Abrasion: Regular Lenght: 45 cm (1.47 ft) Width: 35 cm (1.14 ft) Height: 5.08 cm (2 inch) How to use: -Put soap and water solution (preferably foamy soap) on the mat surface and clean the shoes for 20 seconds on the mat. -Dry the shoes on a towel or dry carpet to remove moisture from the shoes.
Decorative products: burnish clay (pieces for wall, sculptures, vases, bowls) and oil paintings.
These beautiful boho placemats would be a perfect addition to your dining room at home or restaurant. They will burst your house with stunning vibrant colors. The details in the design are beautiful and they are super versatile. They are also great accessories to decorate any part of your house! Measures approximately 20 x 14 inches. This timeless and versatile piece makes a thoughtful homemade gift for a wedding, birthday, anniversary, or housewarming party. The placemats come in an assortment of colors (can be the same as the images or similar, but colors delivered will be random). Price listed is per individual placemat.
Leather products, wallets, handbags, punching bag, leather carpets, belts, work gloves (every made of leather) and most types of leathers, crust and hides..
Sawn Timber Products Including Boards, Clean Square, Deck.
Exotic hardwood flooring and lumber, tzalam, machiche, chechen, parota, pucte, zapote, santa maria, tropical and exotic hardwoods.
Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to 260 degrees Celsius ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to 260 degrees Celsius; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb; web: https://www.njbinglab.com Phone/Whatsapp/ Wechat :+8615805176994 Mail: rossguo@njbinglab.com
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2 Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
Product name: PFA multi-neck flask Specifications (ml): 250/500/1000/2000/3000 Material: PFA Using temperature: -200-260 Pressure tolerance: Maximum 0.05Mpa When fabricating flasks with PFA (Perfluoroalkoxy), there are numerous advantages that make it an excellent choice for various applications. Here are some of the key benefits and industries where PFA flasks are commonly used: Advantages: Advantages of PFA flasks: 1.Excellent Thermal Stability: PFA flasks possess outstanding heat resistance, enabling them to withstand temperatures ranging from -200�°C to +260�°C. This thermal stability is crucial for many high-temperature experiments, such as heating reactions, boiling, and high-temperature solvent extraction. 2.Superior Transparency: PFA flasks exhibit excellent transparency, allowing for clear observation of reaction processes and sample changes. This is crucial for monitoring and recording reactions in chemical experiments, enabling researchers to better understand and analyze the progress and results. 3.Anti-Adhesion Properties: PFA flasks have good anti-adhesion properties, meaning reagents are less likely to adhere to the inner walls. This reduces loss and waste, while maintaining the cleanliness of the flask's interior and preventing any potential contamination from adhering substances. 4.Excellent Electrical Properties: PFA flasks are excellent electrical insulators, effectively isolating electrical currents and reducing interference from electrochemical reactions. 5.Good Mechanical Properties: PFA flasks possess good mechanical strength and abrasion resistance, enabling them to withstand high pressures and impacts.
Advantages: 1.Material Selection: The inner vessels are crafted using modified polytetrafluoroethylene (TFM) and PFA materials, ensuring superior chemical resistance and durability. This choice of materials guarantees a low background value and enhanced performance. 2.Purity and Cleanliness: The vessels are manufactured in a clean environment, without the addition of any recycled materials, ensuring a high level of purity. This results in more accurate and reliable experimental data. 3.Compatibility: These vessels are designed to be fully compatible with various manufacturers' microwave digestion instruments, including CEM models, ensuring seamless integration and operation. 4.Temperature Resistance: The TFM material used in the vessels exhibits excellent resistance to high and low temperatures, ranging from -200�°C to +260�°C, with a maximum tolerance of up to 300�°C. This allows for safe and efficient operation under extreme conditions. 5.Deformation and Permeability Resistance: The TFM material offers improved resistance to deformation and permeation under high temperatures and pressures. This ensures the integrity of the vessel and prevents sample leakage or contamination. 6.Recovery and Durability: The vessels exhibit excellent recovery properties after exposure to high temperatures and pressures, ensuring their long-term durability and reliability. 7.Cost-Effectiveness: While offering comparable or superior performance to original equipment manufacturer vessels, the NJbinglab vessels are priced at a fraction of the cost, significantly reducing expenses for research and scientific institutions. 8.Specialized Production Process: The company employs specialized production processes that ensure a high level of smoothness and cleanliness of the vessel walls. This further enhances the accuracy and reproducibility of experimental results. 9.Customization Options: The company offers customization options, allowing customers to request vessels tailored to their specific needs and requirements. This flexibility ensures that the vessels meet the precise specifications of each application.
1. Product Introduction: PFA sample vials are widely used in geological and mining experiments. They are a versatile experimental tool, also known as dissolution cups, digestion bottles, sample containers and beakers. These tanks are suitable for low-pressure and medium-pressure dissolution, as well as digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these tanks can improve the accuracy of trace analysis. In addition, these tanks are designed with different bottom shapes according to experimental requirements, such as U bottom, flat bottom and V bottom. If you need to use a hot plate or a digestion instrument with holes for experiments, you can get better results with PFA dissolution tanks. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Temperature tolerance: -200-260â?? Applicable to sample pretreatment experiments for analysis of dozens of elements in geological and mineral samples such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging, easy to clean; 2. Temperature resistance: operating temperature -200ï½?+260â?? (do not exceed 150 degrees under closed conditions); 3. Threaded mouth, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. With low dissolution and precipitation characteristics, it is a vessel for storing standard substances and different reagents; 6. The cover and body can be digitally numbered to avoid confusion; 7. The V-shaped bottom design is convenient for the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical exploration samples. 4. Typical users: Isotope, mining, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes, etc.web:
