Watches, solar electric panels.
Roof clay tiles , clay floor tiles , special products in natural and glazed finishes.
Wooden Furniture, Rustic And Vintage Furniture, Pine Furniture, Mdf Furniture, Home Decor..
Decorative products: burnish clay (pieces for wall, sculptures, vases, bowls) and oil paintings.
Gemstones And Other Luxury Items.
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2 Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1. Product introduction: In geological and mineral experiments, PFA sample dissolving tanks are widely used. They are a multifunctional experimental tool, also known as dissolution cups, digestion bottles, vials, beakers, etc. These jars are suitable for low and medium pressure sample dissolution and digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these jars improve the accuracy of trace-level analysis. In addition, these jars are designed with different bottom shapes according to experimental needs, such as U bottom, flat bottom and V bottom. If you need to use an electric hot plate or a digestion instrument with holes for experiments, you can get better results by combining it with a PFA sample dissolving tank. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Withstand temperature: -200-260â?? Suitable for sample pretreatment experiments for the analysis of dozens of elements in geological and mineral samples, such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging on, easy to clean; 2. Temperature resistance: operating temperature -200~+260â?? (do not exceed 150 degrees under closed conditions); 3. Threaded port, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 6. The cover and body can be numbered digitally without confusion; 7. The V-shaped bottom design facilitates the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical samples. 4. Typical users: Isotope, geology and minerals, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc.
Advantages: 1.Material Selection: The inner vessels are crafted using modified polytetrafluoroethylene (TFM), PFA, and PTFE materials, ensuring superior chemical resistance and durability. This choice of materials guarantees a low background value and enhanced performance. 2.Purity and Cleanliness: The vessels are manufactured in a clean environment, without the addition of any recycled materials, ensuring a high level of purity. This results in more accurate and reliable experimental data. 3.Compatibility: These vessels are designed to be fully compatible with various manufacturers' microwave digestion instruments, including CEM models, ensuring seamless integration and operation. 4.Temperature Resistance: The TFM material used in the vessels exhibits excellent resistance to high and low temperatures, ranging from -200°C to +260°C, with a maximum tolerance of up to 300°C. This allows for safe and efficient operation under extreme conditions. 5.Deformation and Permeability Resistance: The TFM material offers improved resistance to deformation and permeation under high temperatures and pressures. This ensures the integrity of the vessel and prevents sample leakage or contamination. 6.Recovery and Durability: The vessels exhibit excellent recovery properties after exposure to high temperatures and pressures, ensuring their long-term durability and reliability. 7.Cost-Effectiveness: While offering comparable or superior performance to original equipment manufacturer vessels, the NJbinglab vessels are priced at a fraction of the cost, significantly reducing expenses for research and scientific institutions. 8.Specialized Production Process: The company employs specialized production processes that ensure a high level of smoothness and cleanliness of the vessel walls. This further enhances the accuracy and reproducibility of experimental results. 9.Customization Options: The company offers customization options, allowing customers to request vessels tailored to their specific needs and requirements. This flexibility ensures that the vessels meet the precise specifications of each application. In summary, the microwave digestion vessels from Nanjing Binzhenghong Instrument Co., Ltd. offer a combination of superior material properties, compatibility, durability, cost-effectiveness, and customization options that make them an excellent choice for scientific and research applications requiring high-performance microwave digestion vessels.
Advantages: 1.Excellent chemical stability: PFA material has extremely low dissolution and precipitation characteristics, which means that when storing and transporting chemicals such as strong acids, strong bases, and organic solvents, the fluid will not be contaminated, thus ensuring the high purity of the fluid. This is critical for applications such as semiconductor manufacturing that require high cleanliness fluids. 2.High temperature resistance: PFA headspace bottles can be used in high temperature environments for a long time without deformation or performance degradation. Its operating temperature range is wide, from -200â?? to +260â??. This characteristic makes PFA headspace bottles widely used in high-temperature processes such as heat treatment and chemical vapor deposition in semiconductor manufacturing. 3.High transparency and visibility: The high transparency of the PFA headspace bottle makes it easy for users to observe the color and state changes of the sample, thus improving the accuracy and reliability of the experiment. 4.Non-adhesive inner wall design: This design reduces sample residue, avoids analysis errors caused by sample adhesion, and improves the accuracy of analysis. 5.Good sealing: The PFA headspace bottle cap has a hole on the top and is equipped with a silicone sheet seal. This design not only facilitates the sampling operation, but also ensures the sealing of the bottle and prevents leakage and contamination of the liquid. 6.Low metal element content: The metal element value of PFA headspace bottles is low, which reduces the deviation of experimental results caused by metal element contamination. It is especially suitable for experimental situations that have strict requirements on metal element content.
1. Product introduction: In geological and mineral experiments, PFA sample dissolving tanks are widely used. They are a multifunctional experimental tool, also known as dissolution cups, digestion bottles, vials, beakers, etc. These jars are suitable for low and medium pressure sample dissolution and digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these jars improve the accuracy of trace-level analysis. In addition, these jars are designed with different bottom shapes according to experimental needs, such as U bottom, flat bottom and V bottom. If you need to use an electric hot plate or a digestion instrument with holes for experiments, you can get better results by combining it with a PFA sample dissolving tank. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Withstand temperature: -200-260 Suitable for sample pretreatment experiments for the analysis of dozens of elements in geological and mineral samples, such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging on, easy to clean; 2. Temperature resistance: operating temperature -200~+260 (do not exceed 150 degrees under closed conditions); 3. Threaded port, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 6. The cover and body can be numbered digitally without confusion; 7. The V-shaped bottom design facilitates the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical samples. 4. Typical users: Isotope, geology and minerals, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc.
Advantages: 1.Material Selection: The inner vessels are crafted using modified polytetrafluoroethylene (TFM), PFA, and PTFE materials, ensuring superior chemical resistance and durability. This choice of materials guarantees a low background value and enhanced performance. 2.Purity and Cleanliness: The vessels are manufactured in a clean environment, without the addition of any recycled materials, ensuring a high level of purity. This results in more accurate and reliable experimental data. 3.Compatibility: These vessels are designed to be fully compatible with various manufacturers' microwave digestion instruments, including CEM models, ensuring seamless integration and operation. 4.Temperature Resistance: The TFM material used in the vessels exhibits excellent resistance to high and low temperatures, ranging from -200°C to +260°C, with a maximum tolerance of up to 300°C. This allows for safe and efficient operation under extreme conditions. 5.Deformation and Permeability Resistance: The TFM material offers improved resistance to deformation and permeation under high temperatures and pressures. This ensures the integrity of the vessel and prevents sample leakage or contamination. 6.Recovery and Durability: The vessels exhibit excellent recovery properties after exposure to high temperatures and pressures, ensuring their long-term durability and reliability. 7.Cost-Effectiveness: While offering comparable or superior performance to original equipment manufacturer vessels, the NJbinglab vessels are priced at a fraction of the cost, significantly reducing expenses for research and scientific institutions. 8.Specialized Production Process: The company employs specialized production processes that ensure a high level of smoothness and cleanliness of the vessel walls. This further enhances the accuracy and reproducibility of experimental results. 9.Customization Options: The company offers customization options, allowing customers to request vessels tailored to their specific needs and requirements. This flexibility ensures that the vessels meet the precise specifications of each application. In summary, the microwave digestion vessels from Nanjing Binzhenghong Instrument Co., Ltd. offer a combination of superior material properties, compatibility, durability, cost-effectiveness, and customization options that make them an excellent choice for scientific and research applications requiring high-performance microwave digestion vessels.
Properties of PFA: 1. Translucent appearance, smooth inner wall, no water hanging on, easy to clean; 2. Temperature resistance: operating temperature -200~+260â??; 3. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 4. Anti-pollution: low metal element value; The PFA condensation filter column is an important device used in gas reactions. Its main function is to purify the reaction gas and remove impurities in it. The role of the PFA condensation filter column in gas reactions will be introduced in detail below. 1. Condensation of reaction gases In many gas reactions, the gas produced by the reaction often needs to be condensed before it can be purified and utilized. The PFA condensation filter column uses external cooling to cool the reaction gas and condense it. During this process, the PFA material has excellent chemical stability and high temperature tolerance, and can withstand gas reaction conditions of high temperature and high pressure. 2. Filter impurities in the reaction gas During the reaction process, some impurities are often produced in the gas, which will affect the success or failure of the reaction. Sometimes toxic or harmful substances will remain in the reacted gas, which needs to be filtered and purified. The filter elements in the PFA condensation filter column can effectively remove impurities in the reaction gas and improve the gas purity, thus ensuring the accuracy, effectiveness and repeatability of the reaction. 3. Protect downstream equipment Before the reaction, we need to process the reaction gas through a PFA condensation filter column to ensure that the reactants are not contaminated in subsequent equipment. At the same time, the filter column can also effectively prevent impurities in the reaction gas from causing corrosion or damage to downstream equipment, so the use of condensation filter columns is also a protection mechanism for downstream equipment. In short, the PFA condensation filter column plays a very important role in gas reactions, and can play multiple roles such as condensation, purification, and protection of downstream equipment. In practical applications, it is necessary to fully consider the gas reaction conditions and the performance of the filter column, and select a suitable condensation filter column to complete the reaction.
Advantages of PFA Test Tubes: 1.Excellent Chemical Resistance: PFA, also known as perfluoroalkoxy, is a fluoropolymer that exhibits superior resistance to almost all chemicals, including acids, bases, solvents, and oxidizing agents. This ensures that your samples and reactions remain unaffected and uncontaminated during experimentation. 2.High Temperature Tolerance: PFA test tubes can withstand extreme temperatures ranging from cryogenic to over 260�°C. This broad temperature range makes them suitable for a wide variety of applications, including high-temperature reactions and cryogenic storage. Excellent Transparency: PFA test tubes offer excellent optical clarity, allowing for clear and undistorted observation of samples and reactions. This is crucial for accurate monitoring and analysis in laboratory experiments. 3.Low Adsorption Properties: PFA has low adsorption properties, minimizing the risk of sample loss or contamination due to adsorption on the tube walls. This ensures the integrity and purity of your samples. 4.Physical Stability: PFA test tubes are physically robust and stable, maintaining their structural integrity even under extreme conditions like high-speed centrifugation. Applications of PFA Test Tubes: 1.Chemical Industry: In the chemical industry, PFA test tubes are widely used for storing and transporting various chemicals due to their excellent chemical resistance. They are especially suitable for handling corrosive and reactive chemicals. 2.Semiconductor Manufacturing: In the semiconductor industry, PFA test tubes are used for transporting high-purity chemicals and reagents. Their material does not release any impurities, ensuring the purity of the manufacturing environment. 3.Photovoltaic Industry: PFA test tubes are also used in the photovoltaic industry for handling strong acids, bases, and high-purity chemicals during the manufacturing process. 4.Biological and Pharmaceutical Industries: In the biological and pharmaceutical industries, PFA test tubes are used for storing and transporting biomedical samples, reagents, and drugs. Their chemical inertness ensures that the samples remain unaffected and uncontaminated. 5.Laboratory Applications: PFA test tubes are extensively used in laboratories for various scientific experiments, especially those requiring minimal interaction with chemicals. Their transparency, chemical resistance, and temperature tolerance make them ideal for accurate monitoring and analysis. web: https//www.njbinglab.com/
Advantages of PFA flasks: 1.Excellent Thermal Stability: PFA flasks possess outstanding heat resistance, enabling them to withstand temperatures ranging from -200�°C to +260�°C. This thermal stability is crucial for many high-temperature experiments, such as heating reactions, boiling, and high-temperature solvent extraction. 2.Superior Transparency: PFA flasks exhibit excellent transparency, allowing for clear observation of reaction processes and sample changes. This is crucial for monitoring and recording reactions in chemical experiments, enabling researchers to better understand and analyze the progress and results. 3.Anti-Adhesion Properties: PFA flasks have good anti-adhesion properties, meaning reagents are less likely to adhere to the inner walls. This reduces loss and waste, while maintaining the cleanliness of the flask's interior and preventing any potential contamination from adhering substances. 4.Excellent Electrical Properties: PFA flasks are excellent electrical insulators, effectively isolating electrical currents and reducing interference from electrochemical reactions. 5.Good Mechanical Properties: PFA flasks possess good mechanical strength and abrasion resistance, enabling them to withstand high pressures and impacts. Industries of Application: 1.Laboratory Research: In laboratory environments, PFA flasks are widely used for various chemical reactions and experiments due to their high purity, chemical stability, and ability to withstand extreme temperatures. 2.Semiconductor Manufacturing: The semiconductor industry requires the use of ultrapure water and specialized chemicals. PFA's high purity, corrosion resistance, and high-temperature stability make it an ideal material for ensuring product quality and reliability in this sector. 3.Chemical Industry: PFA is a primary material in the chemical industry, particularly for pipelines that handle corrosive chemicals. Its excellent corrosion resistance allows it to withstand harsh environments and ensure the safety and stability of chemical production processes. 4.Pharmaceutical Industry: PFA is widely used in the pharmaceutical industry for pipelines and equipment that handle drugs and chemical reagents. Its corrosion resistance, non-toxicity, odorlessness, and tastelessness make it an ideal choice for ensuring drug quality and safety. 5.Food and Beverage Industry: PFA flasks and connectors are suitable for the food and beverage industry, where high-purity materials and compliance with food safety standards are crucial. 6.Medical and Biotechnology: PFA connectors are commonly used in medical devices and biotechnology equipment, such as drug delivery systems and laboratory analysis equipment, due to their corrosion resistance and non-toxicity. In summary, PFA flasks offer numerous advantages that make them suitable for a wide range of applications across various industries.
