Air craft tires.
1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm New: 400*300*12cm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200ï½?+260â?? 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile.
1. Product Introduction The graphite digestion system is an instrument used for sample pretreatment in chemical analysis. It is mainly used to dissolve organic and inorganic substances in solid samples into solutions for subsequent analysis and measurement. It heats the sample in a surrounding heating method, effectively increasing the utilization rate of thermal energy. At the same time, it occupies the front end of conventional digestion equipment with its advantages of higher temperature control accuracy, small differences between holes, fast digestion, energy saving and environmental protection. It can adapt to various types of samples, including soil, water, plants, food, etc. Graphite digesters are widely used in environmental monitoring, food safety, geological exploration and other fields. It can process samples quickly and efficiently and provide accurate and reliable analysis results. 2. Graphite digester parameters Model: BZH-R-XJ Temperature control range: room temperature-220â?? Temperature control accuracy: �±0.1â?? Heating material: graphite + Teflon anti-corrosion coating Number of sample holes: 16, 24, 36, 48, 54, 63, 100 (can be customized according to customer requirements) Control and display mode: PID temperature control digital display Power supply: 220v/50Hz Supporting products: PTFE digestion tube, PFA digestion tube IV. Advantages of our graphite digester Advantage 1: High temperature resistance, acid and alkali resistance and organic solvent corrosion resistance, good stability; Advantage 2: Fast sample digestion speed, batch processing of samples; Advantage 3: Fully enclosed design, while preventing heat loss to a large extent, can also effectively avoid acid mist invasion and damage to equipment components; Advantage 4: Clean and corrosion-resistant: Using a special spraying process, the coating is uniform, firm, and will not fall off after long-term use; Advantage 5: Using advanced integrated surround heating method, all parts of the sample are heated evenly, and the digestion is fast and complete; Advantage 6: Easy to operate, environmentally friendly and energy-saving, saving economic costs; Advantage 7: PID temperature control system, excellent performance, high temperature control accuracy, up to �±1â??. Advantage 8: The heating rate can be adjusted to achieve program heating and control the heating holding time, and the heating rate is stable; We advocate stable, healthy and fast experiments! Application areas Environmental monitoring: sewage, drinking water, sludge, mineral mud, sewage, soil, etc. Food and agricultural product inspection: milk powder, fish, vegetables, tobacco, plants, fertilizers, non-staple food, etc. Consumer product quality control: cosmetics, industrial products, etc. Scientific research: experimental analysis, project development, etc. Disease prevention and control: biological samples, human hair, etc.
Advantages of PTFE pagoda joint: 1.Excellent Corrosion Resistance: The pagoda joint crafted from PTFE exhibits superb corrosion resistance, resisting almost all chemicals, including strong acids, bases, and various organic solvents. This ensures its durability and longevity in harsh environments. 2.High Strength and Durability: The pagoda joint, due to its PTFE composition, possesses high strength and durability. Its tight structure and even distribution of stress at connection points allow it to withstand significant loads, ensuring safety and reliability. 3.Smooth Surface and Low Friction: PTFE is known for its extremely low friction coefficient, which results in smooth operation and reduced energy loss during fluid transmission. This smooth surface also aids in easy assembly and disassembly. 4.Excellent Sealing Performance: The pagoda joint made from PTFE provides excellent sealing performance, thanks to its high elasticity and gas tightness. This ensures leak-free connections and reliable fluid transmission. 5.Wide Temperature Range: PTFE maintains its physical and chemical stability over a wide temperature range, from -200�°C to +260�°C. This allows the pagoda joint to function effectively in extreme temperature conditions. 6.Ease of Installation: Compared to traditional welding and bolting methods, the pagoda joint offers a simpler and faster installation process, reducing both cost and labor
SOFT CORPORATE OFFER BS OIL & GAS LLC ON BEHALF OF OUR REFINERY/SELLER LEGALLY AUTHORIZED WITH RESPONSIBILITY UNDER PENALTY OF PERJURY, HEREBY ISSUES THIS SOFT CORPORATE OFFER WITH GIVEN TERMS AND CONDITIONS AS STATED IN THIS OFFER TO CONFIRM OUR READINESS TO EXECUTE A SALES AND PURCHASE AGREEMENT WITH THE END BUYER, WITH THE ABILITY TO SUPPLY THE FOLLOWING COMMODITIES ACCORDING TO THE TERMS AND CONDITIONS STIPULATED IN THIS SOFT CORPORATE OFFER. DIESEL FUEL EN590 ULSD -10PPM/50PMM/500PMM GASOLINE DIESEL GAS D2 OIL AVIATION KEROSENE JETA1 ESPO D6 VIRGIN FUEL OIL LIQUEFIED NATURAL GAS (LNG) LIQUEFIED PETROLEUM GAS (LPG) UREA N 46 NPK DAP OCTANE GASOLINE 92/95/98 PETCOKE
AVIATION KEROSENE JETA1 MINIMUM LIFTABLE QUANTITY: 1,000,000 BBL/Month, MAXIMUM: 5,000,000 BBL/Month PRICE FOB: GROSS: USD $74.00/BBL, NET: USD $72.00/BBL PRICE CIF: GROSS USD $92.00/BBL, NET: USD $90.00/BBL
LIQUEFIED NATURAL GAS (LNG) MINIMUM LIFTABLE QUANTITY: 100,000 MT/Month, MAXIMUM: 400,000 MT/Month PRICE FOB: GROSS: USD $340.00/MT, NET: USD $330.00/MT PRICE CIF: GROSS: USD $380.00/MT, NET: USD $370.00/M
OCTANE GASOLINE 92/95/98 MINIMUM LIFTABLE QUANTITY: 50,000 MT/Month, MAXIMUM: 500,000 MT/Month PRICE FOB: GROSS: USD $395.00/MT, NET: USD $385.00/MT PRICE CIF: GROSS: USD $435.00/MT, NET: USD $425.00/MT
Bridia Importing Inc is a licensed company that is able to offer premium unsanctioned EN 590 Diesel 10PPM and A1 jet fuel. EN 590 Diesel is available to qualified buyers only at $625 per MT FOB or CIF allocation available: 200,000 MT per week in Fujairah or Rotterdam A1 jet fuel is $96 per BBL for qualified buyers only allocation is 2 million BBL per week in Rotterdam FOB or CIF
We supply and export FerroNickel Electrofurnance Slag. Our Slags are registered under REACH regulation. Conditions are FOB Durr�«s Port in Albany. Application: Sandblasting / High density submarine oil and gas pipe coating aggregate / Additional iron to clinker (Substituting the raw material in cement industries with our slag allows deduction of the ton of CO2 that plants would otherwise have accounted in their carbon balance) / Railway ballast / High strength concrete / Beach aggregate / Granular base for road construction. Most common ingredients: Ingredient and Content Classification (CLP) Silicon Dioxide 30 - 50% Iron 15 - 35% Magnesium Oxide 13 20% Aluminium Oxide 1 4% Chromium (III) Oxide 1.4 3% Nickel < 0.15% Sulfur 0.1% Calcium oxide 3 5%
We Offer Houston & Rotterdam, CIF ASWP. JET A1 $86/BBL
We Can Make All Kind Of Truck Cargo Structures, From A Small One To Really Big Ones.
My name is Hans Von Bertrab, COO of TRL MEX. We are a company that is dedicated to recycling PET in the northern part of Mexico. We are able to fulfill all of your RPET flake needs. In order to give you an exact price per metric ton we would need to know the quantity and frequency of the order. Our prices range from 1550-2050 USD/MT CIF or FOB shipping. This price is open for negotiation based on quantity and frequency.
We offer quality polyurethane spare parts for heavy equipment, to the world, the best price and product
I have 240 sheets of cast plexiglass brand new With protective film still on Size 4 ft x 8 ft Thickness. 1/4 Color. Clear
Green PET dirty Bales, we can supply 400 MT per month. We are located in Monterrey Mexico. We can export to any part of the world.
SPOT QUANTITY ONLY 40MT: PET Post Consumer Clear Flake + 0-4% light blue Higher PVC 500ppm average & b-Value 4 Moisture Max
From Kerb-side soda and water bottles only Moisture Max
Specialized treatment with CHT smart Chemicals (CHT Germany GMBH) Moisture Max
PET Post Consumer Clear Flake + 0-4% light blue Moisture Max
