Calcium silicon alloy is the compound alloy.It is an ideal compound deoxidizer and desulfurizer which can be widely used in the production os steelssuch as high-quality steel,low-carbon steel,stainless steel and special alloys such as nickle base alloy,titanium base alloy.CaSi alloy can also be applied as the heat-raiser for converter steelmaking,the inoculant for for cast iron production and addictive for nodular cast iron production. 1. Product granules: 0-3mm 90%, 10-80mm 90%, 0-220 mesh or customized 2. Packaging: 1MT big bag 3. Samples: can be sent for free 4. MOQ: 5MT 5. Application: steel making, iron casting 6. Advantages: Low impurities with high performance Stable reaction and easy operation Customized specifications are accepted 7. Factory history: More than 13-year experience Welcome to visit our factory 8.Certifications: ISO 9001:2008, SGS, CIQ & COA
ARG 100 is a hydrolytically stable Silicone polyether surfactant, which can be used in wide range of applications in Paints, Agriculture, PU Foams, Textile, Petroleum Refineries, Detergents, Automotive and Household cleaning products, due to its excellent surface property (surface tension below 22 dynes/cm). SS ARG 166 is used as emulsifier in Textiles and other applications. SS ARG 110 is a Super Wetting and Spreading Agent, which have a low molecular weight nonionic silicone surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as a formulation ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals SS ARG 210 All purpose cost effective Spray Adjuvant , which on mixing with insecticides, fungicides, herbicides and other agriculture chemicals increases their penetration, spread and efficiency.
Potassium methyl siliconate (Aquarest WR 100) is an aqueous solution of Potassium methyl Siliconate, Water dilutable. It provides water repellent properties by reaction with atmospheric carbon dioxide. Silane Siloxane Base coat (Aquarest WR 1000) It is suitable for coating painted surfaces too, as this does not impart any color change to the substrate. Forms an excellent weather coat for all types of cement and stone surfaces. Reactive Silicone based (Aquarest 1200) is a solvent soluble fast curing reactive silicone, used for imparting a colorless water repellent surface finish for variety of industries. Reactive Silicone emulsion (Aquarest 1300) is reactive Fluid emulsion water soluble especially designed for treating substrates to impart and improve water repellent properties. Silane based water soluble (Aquarest WR 1100) is a solvent less, water- soluble, Silane Siloxane Emulsion. Dilute solutions of SS WR 1100 serve as general-purpose water repellents for impregnating and priming mineral surfaces. Rust remover and Protective lubricant (SS WRC) is a speciality silicone lubricant for rust loosener and remover, water repellent for metal and also used for protection from corrosion.
SS AF is General purpose Antifoam – Defoamer Emulsion to provide effective antifoaming and defoaming solutions in aqueous systems for variety of industrial applications. SS AF 5730 & 5520 is an excellent Antifoam Emulsion specially designed to control form in high temperature (over boil) and broad pH range ( 4-10) in aqueous systems. SS AF 700 Powdered Antifoam been developed to control the foam generated during process or using Powder Insecticides, Pesticides, Detergents and Fertilizers.
A long chain silicone gum with controlled vinyl level is combined with fumed, precipitated silica as reinforcing filler along with various other materials and additives to create special properties. Once you cure the compounds at high temperature (100~200 ºC) after mixing with catalysts it becomes HTV silicone rubber. The molding process can be compression, extrusion, etc. Main applications: Baby products: Baby nipple, baby bib, etc. Medical products: catheter and negative pressure drainage ball. Kitchen products: bake ware, silicone scoop, etc. Industry product:: Key button, sealing rings and small parts. Electric product: cable accessories, insulator, etc. Sports product: swim cap, goggle, etc.
SS ARG 110 is use as an Adjuvant refers to the use of this product as an additive to a pesticide for the purpose of enhancing the pesticide’s effectiveness for wetting more of the leaf surface (delivering the pesticide to a greater surface area for increased leaf penetration) and thereby providing rain fastness. i.e., herbicides are not washed off by rainfall because they have penetrated into the plant surface. Enhances the performance of agricultural chemicals, especially water-soluble broadleaf herbicides, insecticides, fungicides and plant growth regulators
1. 1:1 addition type, good adhesive strength and self-healing 2. High elongation, excellent flexibility for mechanical stress relieving 3. Low oil penetration after cured, good anti-poisoning property 4. Good dielectric in high temperature for high voltage protection 5. Excellent aging resistance and weatherability 6. Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector. PROPERTY STANDARD/UNITS VALUE of SI2709 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Colorless Liquid Colorless Liquid Viscosity 7;C, cps 800~1000 800~1000 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100:100 Viscosity of mixture 7;C, cps 800~1000 Operation time 7;C, min 60 Cure condition RTV or HEAT 7;C /6 hour;67;C /30min Cured appearance ---- Colorless transparent gel Needle penetration 1/mm 75 Dielectric strength KV/mm 25 Volume resistance DC500V, ohm-cm 1.0¨¢1015 Loss factor 1 MHz88;0.001 Dielectric constant 1 MHz 2.8 Application temperature7;C -60~260 Part Aa10 KG/Bucket, Part Ba10 KG/ Bucket.
1.Solvent free two component material 2.Transparent both before and after cured 3.Platinum catalyzed curing system 4.No by-products after curing 5.Low viscosity before cured, easy to application 6.Excellent flexibility, free from stress 7.Extremely low oil exudation, good anti-poisoning 8.By adjusting the mix rate of part A and part B, can adjust the gel adhesion 9.It can stick repeatable 10.It can use with polyethylene release liner 11.Pass test of physiological compatibility, poison cell, skin stimulus etc. PROPERTY STANDARD/UNITS VALUE of SI2721 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Transparent Liquid Transparent Liquid Viscosity 7;C, cps 61;¨¤150161;¨¤150 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100: (80~120) Viscosity of mixture 7;C, cps 800¨¤150 Operation time 7;C, min ¡ê¾60 Cure condition RTV or HEAT 7;C /6 hour; 67;C /5min Cured appearance ---- Transparent gel Application temperature §C -60~200 Part Aa20 KG/Bucket, Part Ba20 KG/ Bucket; Part Aa200 KG/Drum, Part Ba20 KG/ Drum. Part A is also available in 200 kg metal drums accompanied by the corresponding 200 kg of Part B.
Chemical name : Polydimethylsiloxane CAS No. : 63148-62-9 EINECE : 618-493-1 Apperance : colorless and transparent Physical and chemical features : a.Smoothness & softness & hydrophobicity & good chemical stability & insulation property b.High and low temperature resistance & high flash point. c.Low freezing point (it can be chronically used in the temperature from -50? to +200 ?). d.Small viscosity-temperature coefficicent & big compression ratio & low surface tension. -
5N-6N
Sulphur.
We are sulphur dyes factory in china since 1980s, we have lots of clients in india, we can produce it as your sample. You are welcome to visit our factory or check our website en.Xxdyescom for more details. Sincerely want to establish long term business with you, if you have any questions, please feel free to contact me. 50kg/package
Product name: insoluble sulfur Cas no.: polymeric sulfur: 9035-99-8 Hs insoluble sulphur had been widely used in natural rubber and a variety of synthetic rubber. They are made with tire and rubber products such as: rubber belt, rubber pipe and sealants etc. They are specially used in radial truck tire making. Product standard: (enterprise standard) q/320206gad03-2008 Rubber vulcanizing agent Insoluble sulfur can improve the resistance to both fatigue and ageing of all kinds of rubber products. It is used as the best vulcanizing agent for rubber. And it is widely used in the manufacture of the rubber chemistry such as tire, rubber pipe, shoes, cable and wire, insulating materials, latex, and all kinds of automobile rubber parts, especially for radial tires. Technical specification Appearance: yellow powder (non-flying) Sulphur content (%): 66.0-68.0 Insoluble sulphur content (% min. ): 90.00 High temp. Stability (% min. ) (105 degree*15min): 80 Oil content (%): 19.0-21.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60 degree *2h), % max.: 0.40 Ash, % max.: 0.05 25
Rubber adhesive ra-65(hmmm) Property: this product is the improved product of rubber adhesive a. The appearance of this product is one kind of white 3 Free formaldehyde, % ≤ 0.1 Application: this product is used in binding rubber with steel wire, nylon, rayon, fiberglass, etc. In using this product, simply mix it directly into rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with rubber adhesive rs, rh, re, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: packed in compound plastic bag, 25kg per bag. Keep in cool and dry while storage and transportation, strictly Standard
Size:28x24.5x4cm Weight:315g Color:pantone code 28x24.5x4
Granulated Sulphur While the Benur Elemental Sulphur, which is produced in powder and granule, balances th PH value of the soil, also helps to increase the harvest bynourishing the soil.
Available containerised cargos of Russian, Iraqi, Turkish origin. Bagged
Sulphur is saudi origin and aramco specifications. 100% saudi sulphur origin. . Specifications will be provided on inquiry. Bulk / poly jumbo bags.
Minimum purity level ranging from 99.5% to 99.9% for fertilizer usage. Cis, middle east and china origin. Bulk/bags quantity from 12500 mt to 25, 000 mt. Smaller quantity of 1000 mt to 5000 mt containerized shipments.
Fesi75-aSi 74.0~80.0Mn 0.4Ca 0.3Cr 0.1P 0.035S 0.02 Package: 1mt jumbo bag Dimensions: 0-10mm, 10-100mm
