Sulphur lumps, sulphur powder or sulphur granules required for Pakistan in bulk quantity.
purity Wt% Min, 99.8%, Organic Ash, Wt% 0.08% in Organic Ash, Wt% Max, 0.12% Acidity Wt% calculated H2SO4, Max, 0.01% Moisture, 0.05% Colure, bright Yellow
Features Thermal conductivity 3.0W/(m.K), flammability UL 94-V0 Excellent electrical insulation, bonding strength13 Mpa Application temperature: -45~123, Short term: 225 Fast cure with additional heat Applications EV Battery pack; Aerospace equipments; Semiconductor, LED TV; Between any heat source and a heat sink; XK-D30L is a two-part thermally conductive adhesive, combining features of thermally conductive, electrical insulation,semi-rigid bonding and sealing. It is ease of use, long service life, suitable for automated dispensing system to improve productivity and bonding effect. XK-D25 is designed for strong bonding of metals or plastics. Better effects can be achieved when it is used together with GLPOLY bonding adjuvants. Description GLPOLY Thermally Conductive Structural Adhesives Are Designed For CTP Battery Cell Bond. Ive sorted out the materials of new energy EV CTP battery pack and found that the items concerned most by engineers were thermally conductivity, tensile strength, shear bonding strength, hardness, elongation and shelf life etc,  in addition, the fluency of dispense and fluidity of material were concerned too. The design requirements of each customer are dissimilar, but it does not matter, GLPOLY is confident of providing customized service for customers. 1. Has no equals in features of bonding strength, roughness, thermally conductive and electrical insulation; 2. Bonding strength is 30% higher than that of competitive products, withstanding impact of 12m freefall superimposing speed of 120km/h ; 3. Eliminates the need of mechanical fasten, increasing volume by 20%, reducing components by 40%, improving productivity by 50%, competitive products cant achieve these objectives; 4. Withstands 2500V at 0.28mm thick; dielectric strength is up to 14kV/mm, 40% higher than competitive products; 5. Performance degradation is less than 5% at 85 Celsius degree, RH85 for 1000 hours, and performance of PU deceases by 40% for 500 hours; 6. 25-year service life, three times longer that that competitive products; 7. Flammability UL94 V-0, when it leaves fire, it goes out; some competitive products would be burned out; 8. Cures for 13 hours at room temperature, two times faster than that of competitive products; 9. Application temperature: -45~175, short term: 250, 15% higher than that of competitive products; GLPOLY thermally conductive structural adhesive is designed for CTP battery cell bond, providing 8MPa bonding strength, and compatible with automated dispense processes.
Solubility in Carbon Disulphide (CS2), % by wt, Min 99.9 (on dry basis) IS: 6655 99.9 2 Acidity (as H2SO4), % by wt., Max 0.03 IS: 6655 0.002 3 H2S content, ppm wt, Max 300 - 100 4 Colour in Solid State at ambient temperature, Visual Bright Whitish Yellow Visual Bright Yellow 5 Ash, % by wt., Max 0.25 IS: 6655
INTRODUCTION: The series is and tear strength, 2-part liquid silicone rubber suitable for injection molding processes. FEATURES: 1. High tensile strength 2. Good rebound property 3. Outstanding resistance to ageing 4. Low shrinkage 5. Low yellowing 6. Excellent thermal and cold stability PACKAGING: It is available in 20kg pails of 200kg drums TYPICAL PROPERTY: Appearance: Transparent; Viscosity (mpas): 650,000~950,000; Hardness: 20~70 Shore A; Tensile Strength: 6.5~8.5 MPa; Tear Strength: 20~35 KN/m; Elongation at break: 330%~800%; Linear shrinkage: 0.1% REMARK: The product should be closed tightly, protected from light and moisture, the shelf life is 12 months. These figures are for reference only, please contact us for detail. ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
Granular sulphur Qty: 400,000 metric tons FOB Um-Qasr . Iraq Price: 205 $ per metric ton. Please send me your email address for SGS report if you are interested
Sulpher solid form,with following specifications free sulphur (dry basis) wt% 99.89 inorganic ash wt% 0.05 corbon wt% 0.05 moisture wt% 3.00 Arsenic (Note 1)
KESARIA manufactures premium quality Silicone Bush For Taps to prevent leakage of water in Water Purifier Taps. These Silicone Bush are transparent, flexible, Odorless, withstand extreme temperature range, UV, Ozone, harsh chemicals, acids & alkalis, highly durable & avoid bacterial growth. Our Silicone Bush for taps are available in numerous colors & sizes, are easy to install & are broadly used in Water Purifiers.
SULPHUR "***Special offer*** Russian origin----- DELIVERY TERM: CIF " MOQ: 40,000 MT/Month ( 1-year Contract )----- PACKING: Bulk, etc----- "Payment Term: DLC/MT700 --- SBLC/MT760 --- 5% Guarantee WORKING PROCEDURE CIF/TTO --- 10% Deposit in Escrow Agent WORKING PROCEDURE CIF--- Any World Safe----- Without any payment in advance"
Silicone Hoses
Granulated sulphur of high quality
Sulphur
Please contact us
Grade D Refined in house Electronic Grade = 99.99% Sio2
99.9999%
This silicon carbide crucibles are used to produce sponge iron based on tunnel kilns. Main sponge iron market is India, Iran and Mexico.
Sulphur 80% WDG A preventive and curative contact fungicide Sasage is made up of sulphur technical with 80% of the active ingredient it is used to prevent fungal disease in the plant. Sasage is a broad-spectrum contact fungicide which is preventive in nature.it also provides sulphur to the plant which is essential for the plant.
Russia, Venezuela, Iran
Russia, Venezuela, Iran
Si: 70-75% Al: 1.25% max P: 0.5%max S: 0.05%max C: 0.2% max Packing: 40 Kgs Bag
