D46-1100 cross wedge rolling mill specifications Rollers Pitch 1100mm Rollers dia. 820mm Rollers length 1100mm Max. dia. of rolling parts 115mm Max. length of rolling parts 1100mm Rolling speed 6 round/min Motor power 132kw. In container or in bulk suitable for long time delivery.
3150 ton heavy 4-column push-down hydraulic open die forging press with 80 ton forging manipulator Press specifications: Press force: 400.0 bar (4, 700 tons) Upset force: 425.0 bar (5, 000 tons) Maximum press stroke: 2, 500.00 mm Main cylinder diameter: 710.0 mm No. Of cylinders: 3 set Press daylight: 5, 000.0 mm Press force stage at 425 bar 1st stage (one-central cylinder): 16.7 mn 2nd stage (two-side cylinder): 33.4 mn 3rd stage (three-all cylinder): 50.0 mn Distance between columns clear width: 4, 000mm x 1, 800mm Table shifting device stroke (left x right): 3, 000mm x 3, 000mm Die magazine: 4-die magazine Number of press stroke: Force stage penetration return stroke stroke/minute 3-cylinders 150mm 300mm 10/12 3-cylinders 100mm 200mm 15/17 2-cylinders 50mm 100mm 25/30 1-cylinders 5mm 20mm 80/85 Weight of press (die magazine/die shift): approx. 900 tons (1, 984, 140 lbs) Overall dimension of press: Total dimension of press: 14, 370 mm Press height above floor level: 10, 870 mm Depth: 3, 500 mm Quantity of pumps: 8 Pressure of each pump: 1) rx 360 (2): 400 bar, max 500 bar 2) rf 1000 (6): 400 bar, max 450 bar. In container or in bulk suitable for long time delivery.
D53 series 4000 5000 7000 Ring size od (mm) 500-4000 500-5000 800-7000 Height (mm) 80-700 80-750 80-800 Machine parameter radial rolling force (kn) 2000 2500 3000 Axial rolling force (kn) 1600 2000 2500 Linear speed of press (m/s) 1.3 1.3 1.3 Machine dimensions lxw (mm) 18500x4500 20000x5500 27000x7100 Height above ground (mm) 4400 5000 6100 Drive power radial (kw) 2x315 2x315 2x400 Axial (kw) 2x315 2x315 2x355. In container or in bulk suitable for long time delivery.
Hot die forging hydraulic press Max. Press force: 50, 000ton Main performance parameters Nominal pressure 60mn Return force 3mn Idle stroke fast-down speed 200mm/s Return speed 15mm/s Max. Stroke of moving cross head 1000mm Opening height of press 1300mm Forging temperature 500 degree. In container or in bulk suitable for long time delivery.
* Frame bolted together with the fixed and interconnecting beams to offer maximum rigidity. * Movable beam is made from a sturdy plate to offer minimum deflection. * Long guiding system to keep the upper beam perfectly aligned. * Solid torsion bar to keep the ram parallel to the aligned. * Hydraulic Cylinders honed and hard chromed for maximum durability. * Inch and semi-automatic modes of operation. * Easy remote tonnage control. * Hydraulic Press Brake / Bending Machine / Sheairng Machine / Cutting Machine / Guillotine Shear * WC67Y- / FNB. Naked.
Engineers, consultants, manufacturers and exporter of steel rolling mill plants with turnkey projects (design, manufacture & mill commissioning) for deformed tmt bar mills, wire rod in coil mills, section rolling mill ( channel, angle, hexagonal, steel squares, t-iron etc. ) , flat rolling mills, flat rolling mill and strip rolling mill up to upto 5, 00, 000 ton per annum capacity with slit rolling technology . High production is achieved using “slit technology” which is a proven technology in European countries . Wooden box.
Parameter: 1.Main motor power:15kw 2.Hydraullic station power:7.5kw 3.Roller stand:21 stands 4.Rolling specification:width80-300mm;height40-80mm 5.Rolling thickness:3mm 6.Material of cutting blade:Cr12 7.Rolling material:below Q235 . In container.
1.Passing CE, Guaranteed quality 2.PLC control system, Easy and to handle 3.Whole-process technical trace service 4.Direction to production line operation 5.Design according to your requirements. In container.
1.Passing CE, Guaranteed quality 2.PLC control system, Easy and to handle 3.Whole-process technical trace service 4.Direction to production line operation 5.Design according to your requirements. In container.
YX12.4-30-900 Parameter: 1.Main motor power:15kw 2.Hydraulic station power:3kw 3.Roller stand:34 stands 4.Material expanding width:1250mm 5.Rolling thickness:0.4-0.8mm 6.Material of cutting blade:Cr12 7.Rolling material:below Q345 In container.
YX35-153-918 Parameter: 1.Main motor power: 7.5kw 2.Hydraulic station power: 3kw 3.Roller stand: 23 stands 4.Material expanding width:1250mm 5.Rolling thickness: 0.4-0.8mm 6.Material of cutting blade: Cr12. In container.
HC1225 cutting machine Effective cutting range: 1250mm*2500mm Beam length : 1780mm Track length : 3000mm,
It can be used to roll carbon steel,alloy steel, stainless steel, non-ferrous metal, rare metal and precision alloy in cold condition. Its products have been widely used in such industries as metallurgy, automotive industry, bearing manufacturing, oil machinery manufacturing and so on. Product series as LG30, LG60,LG80, LG120, LD8-15,LD15-30,LD15-60,LD120 etc. High quanlity: Certified with ISO9001:2000 Quality System Brand name: Our brand is Changxin, if you need us to put your own logo on product. It is ok Packing Size: According to products size and quantity Packing method: Wooden case or as per customers requirements Delivery time: 45 days after received deposit Minimum order: As per clients requirements OEM: YES, we can manufacture the parts according to customers drawings
Supply high quality aluminum rolling mill: 1.OEM 2.Supply auxiliary machine 3.Used in aluminum industry Work method: Spindle drive motor and high-speed rtating turbines, tubo-screen with circle on the composition of the broken pieces of grinding, plus mateials from the hopper into the machine in the cavity, the materials in the turbine rotating in the air close to friction and strong. The impact of the turbine blades on the inside, and grinding the leaves and pieces of gap between the ground again. Product Specification Low Material Aluminum Coils Aluminum Code 1xxx, 3003, 5052, 8011 Strip Thickness 6.08.0mm Strip Width 1050-1650mm Coil Inside Diameter 505mm Max Coil Weight 10MT Coil Outside Diameter 1700mm Finished Goods Strip Thickness 0.202.0mm Strip Width 1050-1650mm Coil Outside Diameter 1800mm Coil Inside Diameter 505 Machine specification Max. Rolling Force 14000kN Max. Rolling Velocity 750m/min Dimension of Working Roll 420,1860mm Dimension of Back-up Roll 1100,1800mm
ERMAK CNCHVR angle adjustable hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed. Machines could be programmed easily with the use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically. Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets, the shortest stroke is used.
1.New technology, improve work efficiency. 2.Durable. 3.Excellent quality and competitive price. Technical parameter: Parameter dlm-5 Laminated thickness of stator 15mm-100mm Max outer diameter of stator 200mm Min adaptive core bore 30mm Highest slot full ¡ü80% Input (three-phase power) 380v/50hz Air pressure 0.5-0.8mpa Power 3700w Dimension 2300mm¡á740mm ¡á1500mm Weight auout 1300kg.
Diameter range: 100-1500mm Thickness: galvanized sheet: 0.5-1.2mm Stainless steel: 0.4-0.8mm Material width: 137mm Decoiler: vertical, max load: 1200kg Adding tendons: one or more(optional) Seam lock: located outside the ducts Production speed: 0-37m/min, adjustable Cutter: roller shear Drive system: cutting and turning over ducts adopt air-power; Compaction of feed rolls adopts hydraulic power Forming head mould: steel, aluminiun alloy is optional Total weight: 2000kg Outside size: main machine: 3.4*1.8*1.8m Discharge table: 2.1*1.2*1.1m Total power: 16kw, main motor: 15kw, hydraulic motor: 0.75kw, seam locking wheel motor: 0.12kw Electrical source: 380v/50hz/3ph Console: push-buttons panel.
Diameter range: 100-2000mm Thickness: galvanized sheet: 0.5-1.2mm, 1.3-2.0mm Stainless steel: 0.4-1.0mm Material width: 137mm(or 155mm) Decoiler: vertical, inner coil: 450-510mm Max load: 1200kg Seam lock: located outside the ducts Production speed: 0-25m/min, adjustable Cutting type: 1.Saw blade cutting 2.Plasma cutting Drive system: cutting and turning over ducts adopt air-power; Compaction of feed rolls adopts hydraulic power Forming head mould: steel, aluminiun alloy is optional Total weight: 2500kg Outside size: main machine: 3.4*1.8*1.8 Discharge table: 2.1*1.2*1.1m Total power: 27kw, main motor: 22kw, cutting motor: 4kw Electrical source: 380v/50hz/3ph Console: push-buttons panel.
Diameter range: 100-1500mm Thickness: galvanized sheet: 0.5-1.2mm Stainless steel: 0.4-0.7mm Material width: 137mm Decoiler: vertical, max load: 1200kg Adding tendons: one or more(optional) Seam lock: located outside the ducts Production speed: 0-37m/min,adjustable Cutter: roller shear Drive system: cutting and turning over ducts adopt air-power; Compaction of feed rolls adopts hydraulic power Forming head mould: steel, aluminiun alloy is optional Total weight:2000kg Outside size: main machine: 2*1.8*1.3m Decoiler: 1.5*1*1.6m Discharge table: 2.1*1*0.8m Total power: 16kw, main motor: 15kw, hydraulic motor: 0.75kw, seam locking wheel motor: 0.12kw Electrical source: 380v/50hz/3ph Console: touch screen.
The hydraulic forging hammer is a new energy saving and environmental protection forging hammer. It can save more than 90% energy comparing with the steam forging hammers and the forging hammers with compressor. --roger(at)chinesehammers(dot)com--- The pressure of compressed Nitrogen is constant, and the hammer is operated just by controling the hydraulic system. When you feed blanks, the hydraulic pressure will lift the hammer head. When you hit the blank, the hydraulic pressure will unload fastly and the pressure of compressed Nitrogen and the gravity will drive the hammer head to hit the blank at a very high speed. The hydraulic forging hammer can promote the efficiency and production with good quality. The hammer has safety locking motion so that working is safe and convenient. As further, It can improve the working condition, which is environmental and good for workers. The advantage, structure and design feature of hydraulic forging hammers is as follows, 1;Energy conservation and environmental protection. 2;The operation is convenience,lowering and the act is agility 3;System work safety,it has fully safety locking motion 4;Special structure is more fair and more safety. wooden case.
