The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Chemical Composition: C:0.06 â?? 0.082% Mn:0.75 â?? 1.05% SI:0.13 â?? 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
We supply all kinds of Cast Iron Scrap with good price and good service.All the product is available contact us for more details. Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%. Type: HMS Scrap Composition: iron Scrap Metal Application: Melting HMS Type: HMS1 & 2 Packaging Details: Bulk and Customers preferences d) All scraps shall be free of explosive and oily materials and woody substance in any event. e) Packing arrangement: In break bulk.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Product name Iron scrap Type Casting iron, Iron scrap Metal 100% Alloy or not Non-alloy Secondary or not Non-secondary
Copper wire scrap Wire diameter 020mm 025mm 030mm Weight 3kg 5kg 7kg 15kg 20kg Purity999 min Name Copper wire scrap Millberry 9978 Item Standard Results Purity 9978 999 Carbon 003 003 Coblet 0001 00009 Iron 0005 0005 Phosphorus 001 0009 Sulphur 001 0009 Zinc 0003 0003 Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper ETP Content 999 Cu 999 Element0005 Copper9999 Min Lead0005 Max Bismuth05 Max Total impurities03 Max Copper No 2 kinds of alloy Wire cooper without lines containing impurity contain Copper quantity for 96 minimum content 94 Shall not contain excessive lead and tin change of copper wire welding of copper brass and bronze line excessive oil prohibition and nonmetalcrisp burning line utterly margin of fine copper and excessive sexual yarn Need appropriate means to remove dirt Birch Shall consist of clean untinned uncoated unalloyed copper wire and cable not smaller than No 16 B S wire gauge free of burnt wire which is brittle
Products Used Radiator scarp Copper Content 99.9% Material Copper/Aluminum Dimensions 914mm x 914mm x 12mm Core dimension 360x688x32mm Inlet 35mm Outlet 35mm Grade AA - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min - Cu -: 58% - 60% - Pb -: 1.5% - 2.5% - Imp -: 0.3% (Max.)
Metal scrap
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Product Description : Scrap Steel Price of product ( USD price or FOB price) : Please inquire within for current market prices. Product origin : Worldwide. Origin will be determined at time of inquiry. Key Specifications/Special Features : HMS Type 1 and 2 Minimum Order Size and Packaging details : Inquire within for MOQ and packaging details.