Products Name: Pure Aluminum A7 Ingot 99.9% Chemical Composition: Al Weight: 20/25kg Al (Min): 99%-99.9% Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Item: A7 Aluminum ingot 99.7 high quality Standard: GB/T 3190-2008 JIS H4040:2006 JIS H4001:2006 ASTM B221M:2006 ASTM B209M:2006 ISO 209:2007(E) EN 573-3:2003 etc. Material: 1000 Series Size: Thickness:0.1-200mm,or as requiredWidth:0.1-2000mm,or as required Size can be customized according to customer needs Surface Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc. Application: mainly used for melting ingot; discontinuous melting with scrap; easy control and operation; fast melting; Used for industry such as automobile, pinning and weaving, electron broadly and so on . Export to: Worldwide etc. Package Standard airworthy export packaging: wooden pallets with plastic protection or according to customer requirements Packaging Details: Packing 25KG/INGOT, 1000KG or 1050KG/bundle, or as your requirement AL â?¥ Fe Si Cu Ga Mg Zn others Total 99.9 0.07 0.05 0.005 0.02 0.01 0.025 0.016 0.01 99.85 0.12 0.08 0.005 0.03 0.02 0.03 0.015 0.15 99.7 0.2 0.1 0.01 0.03 0.02 0.03 0.03 0.3 99.7 0.2 0.12 0.01 0.03 0.03 0.03 0.03 0.3 99.6 0.25 0.16 0.01 0.03 0.02 0.03 0.03 0.49 99.5 0.3 0.22 0.02 0.03 0.05 0.05 0.03 0.5 99 0.5 0.42 0.02 0.05 0.05 0.05 0.05 1
Copper cathodes are the basic building blocks of the copper production. They are the starting point for processing copper. With a purity of at least 99.99% the copper cathodes made by affiliates and sources are certified as Grade A by the London Metal Exchange (LME) and registered as the brand â??BRXâ??. They comply with the EN 1978 standards, the requirements of the IWCC and the ASTM B115. Dimensions: 1000�?1000 mm Weight: 55-65 kg Given their high levels of purity and high conductivity, our copper cathodes are employed primarily for the production of continuous cast rod. Further applications are continuous and discontinuous casting plant, especially for the manufacture of copper products in the grades Cu-OFE, Cu-OF1 pursuant to EN, Cu-PHCE, CuAg(OF) and Cu-ETP1. The billets and cakes are used to produce workpieces for high-vacuum technology, superconductor technology and microelectronics.
Material : quality brass wire Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Packing: shrink wrapped carton pallet to resist moisture, quake, and corrosion. Application: for welding brass alloy material standard and purity of copper wire scrap 99.99% pure Name Chemical Composition (%): Copper Scrap Cu: â?¥ Bi:â?¤ Sb:â?¤ As:â?¤ Fe:â?¤ Ni:â?¤ Pb:â?¤ Sn:â?¤ S:â?¤ O:â?¤ Zn:â?¤ P:â?¤ 99.95 0.002 0.002 0.002 o.oo5 0.002 0.005 0.002 0.005 0.002 0.005 0.001 Usage: Electrical, light industry, machinery, building industry, national defense industry Copper Scrap is industry a important sources of the raw materials All kinds of can be recycled Recycling waste production with copper specification: Copper WIRE SCRAP, (Millberry) 99.78% at a purity of 99.78% min. 99.78%Max. COPPER: 99, 9% CARBON: 0.03% COBLET: <0, 001 IRON: 0, 005% PHOSPHORUS: <0, 01% SULPHUR: <0, 01% ZINC: 0, 003% Brass wire with diameter 0.1. 0.15, 0.20, 0.25, 0.30mm COMMODITY: Copper Wire Scrap, (Millberry) 99.78% SPECIFICATIONS: Copper Wire Scrap, (Millberry) 99.78% Specification: Copper % 99.9Min 99.95 Carbon % 0.03Max 0.03 Cobalt % 0.001Max 0.0005 Iron % 0.005Max 0.003 Phosphorus % 0.01Max 0.008 Sulphur % 0.03Max 0.01 Zinc % 0.003Max 0.003
End of life steel rod, typically pulled out of concrete infrastructure. Material must be free of concrete and other contaminants.
We are selling more than 20,000 tons of Steel Iron pipes available now, with the following diameters : - 186 28' pipes each weighing 5.2 tons - 283 18' pipes each weighing 2.28 tons - 5 30' pipes each weighing from 800kg to 1ton - 561 22' pipes each weighing 4.2 tons - 78 22' pipes each weighing 4.2 tons - 4 22' pipes each weighing 4.2 tons - 27 22' pipes each weighing 4.2 tons ect Ideal for recycling or low cost infrastructure projects. FOB price is on demand and negotiable For more information, do not hesitate to contact me on my email address or on WhatsApp ================================================================= OTHERS PRODUCTS ================================================================= Metals & Non-Ferrous : - Copper Cathodes - Copper Powder - Thermal Coal - Gold - Nickel - Iron Pipes - Cobalt
We offer RB3 Thermal Coal with this Technical Specifications : - Net Calorific Value (NCV) : 5,500 kcal/kg - Total Moisture : 14.0% max - Volatile Matter : 20.0% max - Ash Content : 23.0% max - Sulphur Content : 1.0% max - Hardgrove Grindability Index (HGI): 45 to 70 - Nominal Top Size: 50 mm - Initial Deformation Temperature : Minimum 1,150 C in a reducing atmosphere ================================================================= OTHERS PRODUCTS ================================================================= Metals & Non-Ferrous : - Copper Cathodes - Copper Powder - Thermal Coal - Gold - Nickel - Iron Pipes - Cobalt Agricultural : - Cocoa - Coffee - Arabic Gum - Black Pepper
We offer copper cathodes with the purity of 99.99% - Origin : DRC or South America - Quantity : 500 MT / month - Quantity total : 30 000 MT - Size : 914mm x 914mm x 12mm (Approx.) / 36" x 36" x 0.5" - Weight : 125 kg +/- 1% - Weight of each palet : 2 Metric Tons (MT) +/- 1% - Payment : SBLC/DLC Transferable / Non Transferable subject to discussions, negotiations at destination port after SGS inspection via MT103. ================================================================= OTHERS PRODUCTS ================================================================= Metals & Non-Ferrous : - Copper Powder - Thermal Coal - Gold - Nickel - Iron Pipes - Cobalt Agricultural : - Cocoa - Coffee - Arabic Gum - Black Pepper
Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
Dear buyer, Thanks for the interest in our quality Copper Cathodes 99.99% purity(Electrolytic, Grade A). We can supply you on a consistent basis. Monthly Quantity & trial order: 10,000 tons Pacakaging:Package in accordance to standard export package Delivery : AWSP Inspection:SGS or any other equivalent inpection agency *** The buyer must provide the POF to us to allow his/her rep to inspect the goods.********* Price: PRICE AGREED AS LME MINUS 15(FIFTEEN Percent) Payment term:IRREVOCABLE CONFIRMED,ASSIGNABLE,DIVISIBLE TRANSFERABLE STANDBY LETTER OF CREDIT FROM ANY PRIME BANK PAYABLE AT DESTINATION PORT. ####NB##### We do not offer 2% performance bond because we are sole responsible for the product delivery to your destination port and ONLY then is the payment release. If you require a 2% PB, you will have to make a deposit payment of 5% of the shipment,and 95% payment will be be at destination port. Kindly issue an ICPO + CIS + POF
Dear buyer, Thanks for the interest in our quality Copper Cathodes 99.99% purity(Electrolytic, Grade A). We can supply you on a consistent basis. Monthly Quantity & trial order: 10,000 tons Pacakaging:Package in accordance to standard export package Delivery : AWSP Inspection:SGS or any other equivalent inpection agency *** The buyer must provide the POF to us to allow his/her rep to inspect the goods.********* Price: PRICE AGREED AS LME MINUS 15(FIFTEEN Percent) Payment term:IRREVOCABLE CONFIRMED,ASSIGNABLE,DIVISIBLE TRANSFERABLE STANDBY LETTER OF CREDIT FROM ANY PRIME BANK PAYABLE AT DESTINATION PORT. ####NB##### We do not offer 2% performance bond because we are sole responsible for the product delivery to your destination port and ONLY then is the payment release. If you require a 2% PB, you will have to make a deposit payment of 5% of the shipment,and 95% payment will be be at destination port. Kindly issue an ICPO + CIS + POF
Dear buyer, Thanks for the interest in our quality Aluminium Ingots 99.97% We can supply you on a consistent basis. ORIGIN: EUROPE LOADING PORT: MONTHLY & TRIAL ORDER: 5000 TONS -10,000 TONS PACKAGING: BULK INCOTERM: CIF DESTINATION PORT:AWSP TRANS-SHIPMENT IS ALLOWED INSPECTION:BY SGS ATH THE SELLER\'S EXPENSE AT PORT OF LOADING. CIF RATE: LME rate Minus 15( fifteen percent) PAYMENT TERM: IRREVOCABLE CONFIRMED & TRANSFERABLE LETTER OF CREDIT ISSUED UNDER MT700 *** We do not offer 2% performance bond because we are sole responsible for the product delivery to your destination port and ONLY then is the payment release. If you require a 2% PB, you will have to make a deposit payment of 5% of the shipment,and 95% payment will be be at destination port. Kindly issue an ICPO + CIS + POF
steel threaded rods are used in a variety of applications, for plumbing industry, for fire fighting, for hvac., for home building.
Technical Specification Value Units Product Copper Cathodes Copper Cu 99998 Cobalt Co 07 ppm Arsenic As 29 ppm Lead Pb 23 ppm Nickel Ni 22 ppm Sulfur S 24
Our High-grade Iron Ore from South Africa is renowned for its exceptional purity and consistent quality, making it an ideal choice for steel production and various industrial applications. Meticulously extracted and processed, our iron ore ensures optimal performance and reliability in every use, meeting the stringent standards of the global market.
Introducing our high-quality A7 Aluminum Ingots, sourced directly from South Africa, ideal for various industrial applications. With a purity level of 99.7%, our aluminum ingots meet the highest standards for manufacturing and construction needs. Produced through advanced manufacturing processes, these ingots ensure excellent performance, durability, and consistency, meeting the stringent requirements of the global market.
Our copper cathodes boast purity levels ranging from 99.97% to 99.99%. Complying with international standards like BS EN 1978:1988, GB/T 467-2010, and ASTM B115-10, they are meticulously crafted to dimensions of 914 mm x 914 mm x 12 mm (approx. 36 inch x 36 inch x 0.5 inch) with a weight of 125 kg per sheet. Each pallet contains approximately 2 MT, while a container holds around 20 MT net weight and 22.2 MT gross weight. Trust our high-quality copper cathodes for reliability and precision in industrial applications.
