Find Verified Metal Products Suppliers, Manufacturers and Wholesalers

Tubing shall be in the fully heat treated condition as received from the mill. Heat
treatment may ne annealed, normalized, or normalized and tempered per the ASTM
Specification used.
2) Welded tubing conforming to ASTM A 214 or A 226 is an acceptable alternate to
seamless tubing, subject to prior approval from OWNER.

Tensile Strength: 480 N/mm2. Elongation: 33% (Note: 5.5 mm wire rod before wire drawling). Elongation: 5-6% (Note: Diameter 3.3 mm wire rod drawling). Chemical: Carbon: 0.09% Si: 0.17% Mn: 0.57% P: 0.024% S: 0.02%.

Bonding jumpers shall consist of 100 mm (4 inches) wide copper strip or two 6 mm² (10 AWG) copper conductors spaced minimum 100 mm (4 inches) apart. Use 16 mm² (6 AWG) copper where exposed and subject to damage. B. Comply with the following when shielded cable is used for data circuits.

Concertina razor wire with 0.5 mm thickness coating.
Core wire diameter: 2.5 mm. ... Blade length: 22 mm. Blade width: 12 mm. Blade spacing: 35 mm.

Round Annealed Binding Wire
Dimension: 5.50mm Diameter.
Quality: SAE 1008 LS16 Annealed, lightly oiled.
Tensile Strength: 250-430 N/mm2.
Elongation: 40 % @ measuring length of 5.0 x dia.
External Diameter of Coil: 800-900 mm.
Internal Diameter of Coil: 550 mm.
Height of Coil: 600 mm.
Delivery Form: Coil.

Metal cored wires are classified under the American Welding Society specification with solid MIG wires (AWS A 5.18-93 for mild steel, AWS A5. 28-98 for low alloy and AWS A5. 9-93 for stainless steel).

Standard
Number Last
version Description Status
A 19 1936 Quenched-and-Tempered Carbon-Steel Axles, Shafts, and Other Forgings for Locomotives and Cars Replaced by A 236 /no materials/
A 63 Alloy Steel Forgings for Locomotives and Cars Replaced by A 237 /no materials/
A 105/A 105M 2005 Carbon Steel Forgings for Piping Applications /1/
A 133 Alloy-Steel Forgings for Locomotives and Cars Withdrawn 1941 /no materials/
A 136 Forge-Welded Steel Pipe Withdrawn 1945 /no materials/
A 181/A 181M 2006 Carbon Steel Forgings, for General-Purpose Piping /2/

Jhas 0.8 Mm - 1.2 Mm Sealing Wire Galvanized Steel for Lead Seal. ...
50-100 M Sealing Wire, For Industrial. ...
Packing Wire. ...
0.5-5 Mm Golden Sealing Wire, For Industrial, Thickness: 5-20 Mm. ...
Jamesmaag 1.26 Mm Sealing Wire. ...
Silver 1 Mm Packing Wire. ...
NBI Lead Seal. ...
Smartpack 15 Mm Sealing Wire, For Construction, Thickness: 1 Mm.

Brand Perfect Wire
Zinc Coating 40-270 gms/m2
UTS Max 650
Tolerance 0.05mm (as per requirement lesser is also possible)
Wire Thickness 1.40 mm - 6.00 mm

Size 300x600 mm
Material CI
Shape Rectangular
Brand Prit
Surface Treatment Color Coated

Product Material Specification Military Specification
Light Duty Welded, Light Duty Press-Locked, Light Duty Swaged --ASTM A-569 (1/8, 3/16, 1/4) --ASTM A-36 (1/4) by inquiry MIL-G-18014 (Ships)
Heavy Duty Welded Steel --ASTM A-36 (1/4, 5/16, 3/8,1/2) --Other (by inquiry)

Designation Depth of Section Width of Flange Thickness of Web Weight/Mtr Sectional Area Moduli of Section
h b t w a Zxx Zyy
(mm) (mm) (mm) (kg) (cm2) (cm2) (cm2)
ISMC 75 weight 75 40 4.8 7.1 9.1 20.3 4.7
ISMC 100 weight 100 50 5 9.6 12.2 37.3 7.5
ISMC 125 weight 125 65 5.3 13.1 16.7 68 13.4
ISMC 150 weight 150 75 5.7 16.8 21.3 105 19.4
ISMC 175 weight 175 75 6 19.6 24.4 139.8 22.8
ISMC 200 weight 200 75 6.2 22.3 28.5 181 26.4
ISMC 250 weight 250 82 7.2 34.2 39 307 38.4
ISMC 300 weight 300 90 7.8 36.3 46.3 428 47.1
ISMC 400 weight 400 100 8.8 50.1 63.8 760 67

Components Materials Symbol Reference Grade or designation
Body Ductile iron DI/SG BS 2789 420/10
Bolts, nuts and
washer
Hot dip
galvanized
HD BS 4190 -
Sealing Gasket
(Top)
Synthetic rubber EPDM MS 672:99/AS
1646
66-75-IRHD
Sealing Gasket
(Bottom)
Synthetic rubber EPDM MS 672:99/AS
1646
66-75-IRHD

Alumina
Alumina FOB Australia MMWAU00 MMWAU03 MMWAU04 MMWAU16 Assessment Daily PMA05 Sandy calcined Metallurgical / Smelter
Grade Alumina (SGA)
30,000 mt and
35,000 mt bulk
max 12% -45
microns, min 88%
+45 microns
FOB Kwinana,
Bunbury
Shipment 14-60
days
LC 30
days, BL
30 days
$/mt
Alumina FOB Brazil
differential to FOB
Australia
MMWAD04 MMWAD03 MMWAD16 Assessment Thursday PMA05 Sandy calcined Metallurgical / Smelter
Grade Alumina (SGA)
30,000 mt and
35,000 mt
max 12% -45
microns, min 88%
+45 microns
FOB Vila do Conde,
Sao Luis
Shipment 14-60
days
LC 30
days, BL
30 days
$/mt
Alumina Ex-Works China
Yuan/mt
MMXCY00 MMXCY03 MMXCY04 Assessment Daily PMA05 Smelter Grade Alumina, which meets the
latest Chinese official industrial standard
under code GB/T24487-2009. Aluminum
Oxide (Al2O3) content of minimum 98.4%.
Min 1,000 mt Bags of 1.5 mt each.Ex-works Shanxi Loading within 7
days
Cash Yuan/mt
Alumina Ex-Works China MMXWC00 MMXWC03 MMXWC04 MMXWC16 Calculation Daily PMA05 Smelter Grade Alumina, which meets the
latest Chinese official industrial standard
under code GB/T24487-2009. Aluminum
Oxide (Al2O3) content of minimum 98.4%.
Min 1,000

Symbol: Cd
Density: 8.65gm/cc
Melting Point: 320.9 oC
Boiling Point: 765 oC
Thermal Conductivity: 0.969 W/cm/ K @ 298.2 K

Material Brass 16 swg ( 1.5 mm Thick) or st.steel 20 swg (1 mm Thick)
Finishing Buffed
Packing Details Well packed.
40mmround 40x40mm square orinany angular design

Quality Level. 100.
assay. 99.9% trace metals basis.
form. powder.
resistivity. 7.1-cm, 0 C.
particle size. 200 mesh.
bp. 3900 C (lit.)
mp. 2310 C (lit.)
density. 12.45 g/cm3 (lit.)

Material Sheet Metal
Box Shape Square and Rectangle
Durability Yes
Material Thickness 0.5-2 mm

Technical Specifications for 'SMA' Solder Wire/ Stick: 63/ 37. 60/ 40. 50/ 50. 40/ 60. 35/ 65. 30/ 70. 20/ 80. ...
Grade. ...
Tin. ...
Lead. 8.42. 8.52. 8.89. 9.28. 9.47. 9.66. 10.04. ...
Specific. Gravity. 11.9. 11.6. 11.0. 10.3. 9.6. 9.3. ...
Electrical. Conductivity. % of Copper. Melting Temperature. 183 C. 183 C. 183 C. ...
Solidius. 183 C. 188 C. 212 C. 234 C. 244 C. 255 C.

Packaging Type Bundle
Usage/Application SG Iron Casting Manufacturer,Ductile Iron Casting Manufacturer,Stainless Steel Casting Manufacture
Material CRC METAL SCRAP,CRCA SCRAP,CARBON STEEL SCRAP,CRC SHEET METAL SCRAP
Composition AS PER SG IRON CASTING MANUFACTURING
Purity 9 %