Overview Ideal for basement, attic and garage remodels Easy to install Meets or exceeds EN1495 standards Will not warp or twist Lightweight Fewer nail pops Pest and fire proof Mold and mildew proof Not to be immersed in water Are steel studs galvanized Production of metal studs involves forming the studs from strips of galvanized steel in cold rolling machines. Metal studs used for structural building components utilize heavier gauge metals than the metal studs for non-load bearing walls. Do galvanized steel studs rust Yes, galvanized steel resistance to rust corrosion depends largely on the type and thickness of the protective galvanized zinc coating, but the type of corrosive environment is also a critical factor. Factors that rust and corrode galvanized steel: Relative humidity above 60% Sodium chloride (salt) in water or air. What are the different types of metal studs Conventional metal studs� are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8 available in 20, 22 and 25 gauge only). Structural studs are also available. What are the disadvantages of galvanized steel As with any kind of steel finishing, galvanized steel has its cons, which include: There can be a high cost associated with galvanization, especially in large-scale projects. ... Although resistant to red rust, galvanized steel can develop white rust over time if exposed to moisture. Product Name Size(mm) Thickness(mm) Length(m) Metal C- Stud 50 50x30/35/45 0.4-1.2 Standard: 3m 1-6m 60 60x30/35 75 75x35/40/45 90 90x35/45 100 100x35/45 Metal U-Track 50 50x25/30/40 0.4-1.2 Standard: 1-6m 60 60x35/45 75 75x40/45/50 90 90x30/40 100 100x30/40
Ferrosilicon/Ferrosilicon Powder/Ferrosilicon Slag FeSi Ferrochrome FeCr Ferro Manganese FeMn Ferrosilicon manganase FeSi Mn
Chromium plating, phosphating, oxidation, nickel plating, cadmium plating, passivation, silvering, plating, galvanizing, etching, coating of parts from ferrous and non-ferrous metals and alloys. For order or information contact us
DESCRIPTION : It is galvanized steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A: The wire has four points and is formed by twisting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanized barbed wire is manufactured from galvanized mild steel wire conforming to IS: 280 Galvanizing : The barbed wire is galvanized and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanized coating on the round wire. Packing: The coils are normally supplied in the bare condition.
DESCRIPTION : The wires are custom built to suit customers actual requirement. These wire are normally supplied as Annealed finish wires APPLICATION : Used in manufacturing of lock circlip used for locking shafts Specification : IS:EN 42C/42J
DESCRIPTION : It is galvanised steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A : The wire have four points and formed by twesting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanised barbed wire is manufactured from galvaised mild steel wire confirming to IS : 280 Galvanizing : The barbed wire is galvanised and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanised coating on round wire. Packing: The coils are normally supplied in bare condition.
DESCRIPTION : These wires are supplied in coils with Phosphated coating to facilitate cold heading operation. APPLICATION : Used in manufacturing Balls, Rollers, Taper rollers, Cylindrical rollers and needles etc. made out from EN31 / SAE 52100. SPECIFICATIONS : Grade EN31 / SAE 52100 (Carbon 0.98 â?? 1.10 % and Chromium 1.30 â?? 1.60%). Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed. All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customerâ??s specification. PACKING : The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene & Hessian/ HDPE. We specialize in supplying Bearing wires to customerâ??s actual needs. Specification : IS:EN 31/SAE 52100 SIZE RANGE : Min. 1.60 MM, Max. 9.50 MM
DESCRIPTION : These wires are High Carbon Annealed Bright drawn wires. APPLICATION : Used in manufacturing hand sewing needle and Hosiery needle. SIZE RANGE : Min. 0.76 MM, Max. 2.00 MM
Brass,copper,Cans,soft,Hard aluminium,Iron &Tins
Few loads a month of removed cadmium negative plates. Al: 0.26 Ca: 0.38 Cd: 21.34 Co: 0.04 Cr: 0.16 Cu: 0.00 Fe: 57.94 Mg: 0.00 Mn: 0.13 Mo: 0.00 Nb: 0.000 Ni: 0.46 P: 0.015 Pb: 0.00 Si: 0.00 Sn: 0.000 Ti: 0.000 V: 0.000 Zn: 0.00 UQF; 0.000 Na: 0.100 Cl:0.000 K: 1.705 As: 0.000 Se: 0.000 Sb: 0.000 C: 1.20 S:0.07
Wood Type: Mango & Iron Size (Inch): 8 x 8 x 7 MOQ Piece: 250 FOB Price (USD): 8.4 Place Of Origin: India Quality Certification: 100% Handmade superior quality with high standards of control.
Many different types specifications, Metal Dressuar, Seating in Several Colors with Tempered Glass, lac coated. Request catalog and price list for more details
Many different types specifications, Metal Dressuars, Seatings in Several Colors with Tempered Glass, lac coated. Request catalog and price list for more details
Many different types specifications, Metal Nesting Table Galaxy design, coffee table with Tempered Glass, lac coated. Request catalog and price list for more details
AM50A / AM60B / AZ91
Refer to COA attached for chemical composition of Magnesium Ingot 99.90%
We offer OEM sheet metal fabrication,electrical enclosure and CNC machines with high precision and quality We constantly  pursue high quality metal product producing, and devote ourselves to provide fundamental components to worldwide clients and be part of a functional and specialist factory to the world.  If  any defective goods arrives you due to our responsibility, money will be refund or new parts will be offered in free.
scrap metal baling machine 1. Application: Y81 series hydraulic scrap metal baler is used in steel foundry, recycling companies, ferrous & non-ferrous smelting industries. It can press metal scrap into required shapes (cuboid, cylinder, octagon etc.) to reduce the storage space, transportation cost and moreover with the higher density, it will help the scrap melting in furnace to reduce the furnace consumption. 2. Features a) Various models with different press force (60 to 2000 tons) to fullfil specific demands; custom design for your specific request. b) Easy installation, all Y81 series need is a flat ground. c) It can be electrical or diesel; it can be manual lever operation or full automatic operation, moreover it can be remote control. d) Hardox wear plates give it a longer life to deal with different kinds of scrap.
Molybdenum plate Product name: molybdenum plate/sheets Grade: Mo-1 Surface:Black / Ground Purity: 99.95%Min Density:10.2g/cm3 Size: T:0.05-50.0(mm)xW:50-600(mm)xL:100-3000(mm) Certificate: ISO 9001:2015 Application: components for vacuum furnace, Mo-boats, high temperature parts, targets Supply Ability 5000 Kilogram/Kilograms per Month; Packing: Plywood Packaging
Certificate: ISO1900:2015 Drawing Format 2D/3D/CAD/Dwg//Step/Pdf/Igs Technology Stamping\Punching\Laser Cutting\Turning Machine After-sales Service:Change for New Warranty:1 Year Type:Cold Stamping Processing Type: Shaping Metal Material:Steel/Aluminum/Copper/Stainless Steel 316/etc Mould:Multistep Progressive Die Samples:US$ 50/Piece 1 Piece(Min.Order)|Request Sample Customization:Available Delivery Time 10-15 workdays
