Metal Products Suppliers and Manufacturers

We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps. Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.

Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.

Pig feed refers to the nutritional mixture of ingredients specifically formulated to provide essential nutrients to pigs raised for various purposes, such as meat production (pork) or in some cases, as pets or for agricultural work

Copper Cathode origin-based Congo Are you looking for high-quality copper cathodes? We have an exceptional offer available for genuine buyers. Located in a bonded warehouse in Zambia, our copper cathodes has 99.99% purity and are ready for immediate shipment. As direct contact with the seller's mandate, we guarantee transparent and smooth transactions and have experience more than 10 years of this service. We do not entertain unverified brokers and buyers, Hence if you are unwilling to verify yourself please refrain from contacting us. Please contact us to discuss price, we do not have fixed prices only discounts from LME. - Location: Bonded Warehouse in Zambia - Product: Copper Cathodes - Purity:99.99% - We can do CIF - Direct Contact to Seller's Mandate

High purity copper ingots (HF, C5N grade), oxygen-free copper Chemical purity: 99.999% wt. calculated as the difference between 100% and the total content of metal implications (Metals Base) in accordance with Alfa Aesar Sigma-Aldrich or Russian GOST 859-2014 â??Copper. Ingots. Quantity: from 10,000 to 50,000 kg per month or more. Assortment and packaging: - Flat ingots (strips 15 - 40 mm thick; 300, 600 mm wide; up to 1500 mm long, packaged in 1 ton; - Ingots may be cut into templates of 3-5 kg, in plastic bags, packed in plastic or metal boxes of 40-50 kg; - Bars - a square of 50 mm.

Iron ore is a crucial raw material used in the production of iron and steel. It is a rock or mineral from which iron can be extracted economically. The main types of iron ore are hematite and magnetite, with goethite and limonite also being important sources

Remelted Lead Ingots are being produced from Raw Lead / Battery Scraps / Lead Scraps and other scraps of Lead in the specially designed Blast Furnace. The Scrap is obtained and is mixed with other reducing agents in the Furnace.

Aluminium Cone - Origin : Viet Nam _ Specification + Weight: 80-120 gr/ pcs + Packing : 1 ton/ jumbo bag

+ SECONDARY ALUMINIUM INGOT _ Origin: VIET NAM _Al content: 96% - secondary aluminim ingot made from ubc scrap

SECONDARY ALUMINIUM INGOT _ Origin: VIET NAM _Al content: 96% - secondary aluminim ingot made from ubc scrap + packing : 23 tons/ cont 20 + Payment term: L/c at sight or T/T + Delivery time: within 1 week after receiving deposit

SECONDARY ALUMINIUM INGOT _ Origin: VIET NAM _Al content: 96% - secondary aluminim ingot made from ubc scrap + packing : 23 tons/ cont 20 + Payment term: L/c at sight or T/T + Delivery time: within 1 week after receiving deposit

Clean alloy 7075. Ready now 22 mt. And 80-100 mt per month We also have 2024 alloy, 120 mt and 100 mt regularly. full details upon interest. Metores Recycling Helsinki Mikael Keinonen

Attachment less than 1%. Possible to find straws in the can. Deodorant cans can be present but are made of aluminium. Bales: 45-47cm Weight of 1 bale: 50-55 kgs Loading: 25 MT/ container

1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

Ferro Silicon is a universal heatblocker used to produce carbon and stainless steel This additive is used with other ferro alloys in the deoxidising process of steel and in the production of silicon itself It is also used in the production of cast iron as it can accelerate graphitisation Ferro Silicon replaces the need for ferro manganese spiegeleisen and calcium silicides in the manufacturing process