The wear castings are usually made by metling the wear resistance materials and formed in a mould. The wear plates are always heatment treated to obtain the best performance for wear and impact resistance to suit the working conditions in different applications. Wear Casting Plates Bimetal Wear Plates
shredded municipal scrap 200t monthly
Overview Ideal for basement, attic and garage remodels Easy to install Meets or exceeds EN1495 standards Will not warp or twist Lightweight Fewer nail pops Pest and fire proof Mold and mildew proof Not to be immersed in water Are steel studs galvanized Production of metal studs involves forming the studs from strips of galvanized steel in cold rolling machines. Metal studs used for structural building components utilize heavier gauge metals than the metal studs for non-load bearing walls. Do galvanized steel studs rust Yes, galvanized steel resistance to rust corrosion depends largely on the type and thickness of the protective galvanized zinc coating, but the type of corrosive environment is also a critical factor. Factors that rust and corrode galvanized steel: Relative humidity above 60% Sodium chloride (salt) in water or air. What are the different types of metal studs Conventional metal studs� are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8 available in 20, 22 and 25 gauge only). Structural studs are also available. What are the disadvantages of galvanized steel As with any kind of steel finishing, galvanized steel has its cons, which include: There can be a high cost associated with galvanization, especially in large-scale projects. ... Although resistant to red rust, galvanized steel can develop white rust over time if exposed to moisture. Product Name Size(mm) Thickness(mm) Length(m) Metal C- Stud 50 50x30/35/45 0.4-1.2 Standard: 3m 1-6m 60 60x30/35 75 75x35/40/45 90 90x35/45 100 100x35/45 Metal U-Track 50 50x25/30/40 0.4-1.2 Standard: 1-6m 60 60x35/45 75 75x40/45/50 90 90x30/40 100 100x30/40
Ferrosilicon/Ferrosilicon Powder/Ferrosilicon Slag FeSi Ferrochrome FeCr Ferro Manganese FeMn Ferrosilicon manganase FeSi Mn
Chromium plating, phosphating, oxidation, nickel plating, cadmium plating, passivation, silvering, plating, galvanizing, etching, coating of parts from ferrous and non-ferrous metals and alloys. For order or information contact us
DESCRIPTION : It is galvanized steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A: The wire has four points and is formed by twisting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanized barbed wire is manufactured from galvanized mild steel wire conforming to IS: 280 Galvanizing : The barbed wire is galvanized and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanized coating on the round wire. Packing: The coils are normally supplied in the bare condition.
DESCRIPTION : The wires are custom built to suit customers actual requirement. These wire are normally supplied as Annealed finish wires APPLICATION : Used in manufacturing of lock circlip used for locking shafts Specification : IS:EN 42C/42J
DESCRIPTION : It is galvanised steel barbed wire with two strands of wire used for fencing. APPLICATION : Used in fencing Type A : The wire have four points and formed by twesting two points wire, each two turns, tightly around both line wires. Specification : IS:278 SIZE RANGE : All Sizes Material : The galvanised barbed wire is manufactured from galvaised mild steel wire confirming to IS : 280 Galvanizing : The barbed wire is galvanised and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanised coating on round wire. Packing: The coils are normally supplied in bare condition.
DESCRIPTION : These wires are supplied in coils with Phosphated coating to facilitate cold heading operation. APPLICATION : Used in manufacturing Balls, Rollers, Taper rollers, Cylindrical rollers and needles etc. made out from EN31 / SAE 52100. SPECIFICATIONS : Grade EN31 / SAE 52100 (Carbon 0.98 â?? 1.10 % and Chromium 1.30 â?? 1.60%). Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed. All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customerâ??s specification. PACKING : The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene & Hessian/ HDPE. We specialize in supplying Bearing wires to customerâ??s actual needs. Specification : IS:EN 31/SAE 52100 SIZE RANGE : Min. 1.60 MM, Max. 9.50 MM
DESCRIPTION : These wires are High Carbon Annealed Bright drawn wires. APPLICATION : Used in manufacturing hand sewing needle and Hosiery needle. SIZE RANGE : Min. 0.76 MM, Max. 2.00 MM
Brass,copper,Cans,soft,Hard aluminium,Iron &Tins
We can supply magnesium ingots. We can make custom specifications. Origin China by Indian factory. Minimum order quantity 5 MT. Payment term, LC, DLC or SBLC. Factory price $4500 Per MT. Send your orders, we will get back to you within 1 hour.
Few loads a month of removed cadmium negative plates. Al: 0.26 Ca: 0.38 Cd: 21.34 Co: 0.04 Cr: 0.16 Cu: 0.00 Fe: 57.94 Mg: 0.00 Mn: 0.13 Mo: 0.00 Nb: 0.000 Ni: 0.46 P: 0.015 Pb: 0.00 Si: 0.00 Sn: 0.000 Ti: 0.000 V: 0.000 Zn: 0.00 UQF; 0.000 Na: 0.100 Cl:0.000 K: 1.705 As: 0.000 Se: 0.000 Sb: 0.000 C: 1.20 S:0.07
HMS 1&2 Metals Scrap for sale. Minimum order quantity, 1000 MT. Maximum order quantity per month, 500,000 MT. Origin Russian Federation. Loading port, Novorossiysk or Vladivostok. Payment term, Transferable or Non-Transferable SBLC MT760 OR Transferable or Non-Transferable DLC MT700. Seller provide 2% performance bond. Price, CIF $290 Per MT ASWP. Send your orders. We will get back to you within 1 hour.
Wood Type: Mango & Iron Size (Inch): 8 x 8 x 7 MOQ Piece: 250 FOB Price (USD): 8.4 Place Of Origin: India Quality Certification: 100% Handmade superior quality with high standards of control.
TZM is a particle-strengthened molybdenum based alloy containing titanium, zirconium and carbon.TZM is widely used in the aerospace, aviation and other industries. It could be used as nozzle material, valve body, gas piping materials, tubes in the gate material, die casting molds, extrusion dies and high temperature furnace heating element and heat shield etc.
1. Purity: Mo 99.95% 2. Density: 10.2g/cm3 3. Wall thickness: â?¥ 1mm 4. Length: 1000mm (max. ) 5. High performance, competitive price
Application - For producing heating elements and refractory parts in high temperature furnaces - For producing electric light source parts and electric vacuum components - Suitable for producing ion implantation parts - Used in glass and glass fiber industry - Used as electrodes
Many different types specifications, Metal Dressuar, Seating in Several Colors with Tempered Glass, lac coated. Request catalog and price list for more details
Many different types specifications, Metal Dressuars, Seatings in Several Colors with Tempered Glass, lac coated. Request catalog and price list for more details
