Ferrous scrap (HMS, Shredded, Bonus, etc), aluminium scrap (UBC, Aluminium bottle caps, aluminium tent tabor), copper scrap. Packing and shipment size depending on scrap type. Bulk or container
We also have interest in selling Bulk Ferro Alloys and especially Low/Medium Carbon Silico Manganese and we are already exporting these product/s. We have tied up with a manufacturer bin , Bhutan to sell their products. Products are:- Low Carbon Silico Manganese. Typical Specifications are: Mn: 55 % Minimum Si: 25-28% C: 0.2% Maximum P: 0.15% Maximum Size: 10-150 MM (90%) Medium Carbon Silico Manganese. Typical Specifications are: - Mn: 55%-60% Si: 22%-25% Max C: 0.5% Max Si: 0.05% Max P: 0.2%-0.40% Size: 10-150 MM (90%) For sure, we will be able to meet the requirements, once we get your reply
Alloy 20 is an austenitic nickel-iron-chromium alloy with outstanding corrosion resistance. Alloy 20 Olets provide strong sulfuric acid resistance. This alloy is also resistant to phosphoric acid, nitric acid, and aqueous salt solutions. Alloy 20 Olets are an excellent choice when chloride stress corrosion cracking is a concern since they resist pitting and crevice corrosion. Because the rate of corrosion can substantially increase in chloride ion-containing environments, caution should be exercised. Alloy 20 Olets may provide cost savings while outperforming typical stainless steels when compared to higher nickel-based alloys. Alloy 20 is a super-austenitic stainless steel that was developed for maximum corrosion resistance to sulfuric acid and other extreme environments where regular austenitic grades are ineffective. Hot-working and cold-working are two traditional ways of producing Alloy 20. Itâ??s also vital to determine whether or not the desired corrosion resistance can be achieved in a given environment. Alloy 20 is used in a variety of industries, including chemical processing, petrochemical and refining, marine, pharmaceutical, and food processing. End-use applications include storage tanks, mixing tanks, agitators, pump and valve parts, food processing equipment, fasteners, and fittings. Plastics and synthetic fiber manufacturing Equipment for chemical and petroleum processing, heat exchangers, and process piping
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Allow die casting in China Provide your drawing or sample.
Wood pellet, seafood and scrap.
Hms #1, steel turnings, p&s 5, manganese 12% and 15%, disk and drums , prepared cast iron scrap.Fob, cif
1) plastic injection molded parts 2) mould design and development 3) automotive plastic parts 4) auto electrical parts 5) industrial/automotive battery parts 6) plastic household products 7) gear moulding 8) over moulding.
Dry fruits, organic dry nuts, seeds, grains, vegetable oils, sunflower oil, soybean oil, canola oil, animal feeds, scrap metals, copper wire scrap, a4 copy papers. food grade chemicals.
Hms 1& 2, hms 1, pns, al 6063.Transportation and shipping, brokerage service
Ferrous & non ferrous scraps such as rail scrap, copper scrap, aluminium scrap, new ferrous & non ferrous products such as copper cathode, aluminium ingots, oil spill bioremediation & absorption products from cotton lint and polymer based soil stabilization product (2kg to treat 50m3 soil). we also supply fuel products such as en590, jet fuel a1, d6, etc. from genuine suppliers/title holders..
Steel castings, sgi/ductile iron, grey iron, investment castings, ferrous & non ferrous castings, high pressure die castings, opening impeller, suction impeller, diffuser, casings, turbine casings, compressor castings, industrial pump and valve castings, marine castings, propeller, duplex steel castings and steel forgings, copper cathode.Quality assurance, logistics and after sales services.
Cobalt-chromium-molybdenum alloy (CoCrMo) is a kind of cobalt-based alloy, and is also a kind of Stellite alloy. It is a cobalt-based alloy that is resistant to wear and corrosion. The first cobalt-based alloy was a cobalt-chromium binary alloy, which was later developed into a cobalt-chromium-tungsten ternary composition, and then later did the cobalt-chromium-molybdenum alloy develop. Cobalt-chromium-molybdenum alloy is a kind of alloy with cobalt as the main component, containing a considerable amount of chromium, molybdenum and a small amount of nickel, carbon and other alloying elements, and occasionally also containing iron. DM FOR MORE IMFO
Metal scrap like copper scrap, aluminium scrap, car engine scrap, all car parts scrap.
Various types of machinery and production lines. tires and accessories for cars, motorcycles and tractors,ships. food and additives. minerals, metals and alloys. medical equipment, chemicals..
Ferro vanadium, caustic soda, scraps, crude oil, hdpe granules, coal, iron ore, copper ore, shredded tyres, flourspar, ferro silicone, ferro manganese, ferro nickel, ferro chrome, ferro titanium, ferro niobium, ferro molybedum, ferro vanadium, ferro born, antracite coke, gas coke, titanuim spoonge, hardwood charcoal, vanadium nitride.
Food product, medical tools , metal scrap , oil.
Refined palm oils, edible oils, copper cathode 99.9% copper recovery, auto shredded/zurik metal, shredded tires, starch.
Petroleum products, copper products, sugar.Broker
Grade a, bright & shiny copper for 99.9%..Trading