Product name: nickel-chromium heating wire, strip. Product model:Cr20Ni80/ Cr30Ni70/ Cr15Ni60/ GH1140/Cr20Ni35/Cr20Ni30 Specifications: wire: 0.05 --- 10 mm Strip: (0.05 - 0.1) (5 - 250) mm Bar: 12 --- 30 mm Flat Yarn: 0.025 (0.4 - 4) mm. Introduction: Nickel-chromium alloy material is austenitic alloy, high temperature strength than the high-iron-chromium alloy material with high and stable resistance, corrosion resistance, good oxidation resistance of the surface, no distortion at high temperature, good viscosity, elongation than the iron-chromium alloy is 50%, processing prone to breaking, long after the plastic is better, do not become brittle after cooling, ease of repair after damage, regeneration of the alloy is good, is an industrial furnace, metallurgy, machinery, electrical appliances, aircraft, automotive, military and other industries producing heating elements and resistance elements preferred material. 3 kgs /spool.
Monel 400 Alloy Wire: Monel 400 Alloy Wire is corrosion resisting, such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Meanwhile, it exhibits characteristic like high strength.Monel 400 Alloy Wire has low corrosion rate in flowing brackish or seawater while performing excellent resistance to stress-corrosion cracking in most freshwaters Wire Diameter: 0.05mm-5.0mm, 4Gauge to 24 Gauge, 0.002 Inch to 0.2043 Inch Monel K-500 Alloy Wire: Monel K500 Alloy Wire is one kind of the nickel-copper alloy Alloy Wire. Monel K500 Alloy Wire combines the excellent corrosion resistance of Monel 400 Alloy Wire with the added advantage of greater strength and hardness. Alloy K-500 Alloy Wire has approximately three times the yield strength and double the tensile strength when compared with alloy 400. When in the age-hardened condition, Wire Diameter: 0.05mm-5.0mm, 4Gauge to 24 Gauge, 0.002 Inch to 0.2043 Inch. 3 to 5 kgs/spool, coil.
Scrap
HMS1&2
1. Cold Work Steel (A2/1.2363,01/1.2510,D2/1.2379,D3/1.2080,SKD11,S7) 2. Hot Work Steel (H11/1.2343,H13/1.2344,H21/1.2581,L6/1.2714) 3. Plastic Work Steel (P20/1.2311,718/1.2738,S136/1.4034,NAK80) 4. Carbon Structural Steel:1018,1045/S45C,1050/S50C,20Mn,40Mn. 5. Carbon Tool Steel:T7,T8,T10,T11 6. Alloy Tool Steel:4140/42CrMo4, 4340/40CrNiMoA,,51CrV4 38CrMoAl 7. High Speed Steel:M2,M35,M42,T1 8. Alloy Structural Steel:20Cr,40Cr, 4140/42CrMo4, 40CrNiMoA/4340,8620 9. Machinery Steel:20CrNiMo/8620,4130,4140/42CrMo4, 10. Stainless Steel:201,202,301,302,304,304L,316,316L,310S,430,490L 11. Seamless Pipe: 4140/42CrMo4 12. Mould & Die Steel: P20/1.2311, H13/1.2344, 01/1.2510, 718/1.2738, 1045/S45C, Flat bar:8-90mmX305-610mm Round bar:Dia 8mm-Dia1000mm. 20'or 40'Container
Molybdenum wire. Depend on product.
Yes,our fridge compressor scrap is sealed and high quality, oil drained, copper winding inside with connection box.Details of fridge Compressor Scrap and specifications: 220-240V/50 or 60HZ Cooling capacity:90-190W Displ.: 5.99-12.53cm3 High efficiency Types: Danfoss, National, Asepera,Embraco and Ireland. We packed 24 Metric Ton into 20Fit container and 38 Metric Ton into 40Fit container at the Loading Port.
glass coating in form of a paint suitable for spraying onto glass to produce colored glass surfaces. Our mixing software produces all Ral, Pantone, NCS and BS color palettes, you can produce over 7,000 colors. Such glass surfaces are used as kitchen backsplashes, countertops, glass doors etc. We are looking to cooperate with serious distributors/users in all countries.Sell ultrafine copper powder (PMU) Isotope-Cu63, Cu65 / Price – USD 350 - 800/kg / Purity- not less than 99,9995% /; Quality - Official certificate of Iasts Giredmet (Russia) and IGAS (Germany). Origin - Russian Federation. Technical characteristics of nickel and nickel wire: not radiation, not toxic does. Application: Copper powder applications include: powder metallurgy (PM), metal injection molding (MIM), friction components, thermal management, diamond cutting tools, lubricants, carbon brush, coatings, catalyst, brazing paste. The Described product, are often used and as financial instrument. Common chemical elements: Element Content Element Content Element Content Ag 10 Mg Mn 2 Si 10 Al 1 Ni
Metal scrap, rolling scrap, mixed scrap, vehicle scrap.
Galvanized :hot-dipped galvanized / electro galvanized. Hession.
Scrap metal. Bulk.
We are able to offer to you shred, coils, aluminum, rails, crushed cars, and copper for purchase. Containers--20' or 40'----ships---open containers.
Perforated metal mesh is used in a variety of applications and industries including air diffusers in the HVAC market, acoustical panels for noise control, as filter media or support in the water filtration industry, and as architectural elements in building construction. The uses of perforated metal are unlimited. If you have an application that required control of light, sound, air, water, or particles, perforated metal might be your solution. The materials of perforated metal metal mesh could be Carbon Steel,Mild Steel, galvanised steel, stainless steel type 304 and 316, and aluminium are all standard lines. Sheets and half sheets up to 5mm thick with holes sizes 0.4 to 20mm can be available,and cut to size or custom fabricated. Perforated metal mesh with series of Hole Pattern: holes, square hole, lozenge holes, round hole, hexagonal hole, the cross hole, triangle holes, long round hole, long waist hole, the plum flower hole, the scales of holes, pattern of holes, pentagram hole, irregular holes, up drum hole etc. Perforated metal panels can be finished with a variety of coatings to enhance its appearance or increase its longevity. Perforated metal is a highly sustainable material as it lasts generations without needing to be replaced. Perforated metal can be produced from recycled material and can also be completely recycled when its usefulness is over. Pallets: 1000*2000*1000mm.
Ms pipe Size 1 to 5 mitter 15x42. 100 mt.
Silico manganese 60-65% and 65-70%, si 14%to 16%, c 2.5-2.0%, p 0.30 -0.25%, s 0.03%, particle size 10-50mm(90% min). Bags containing 1 mt, shipped in containers upto 25 to 27 tons.
We have a large quantities of Used Railway Tracks and HMS 1&2.We can supply 30,000MT per month. Loose and cut to sizes before containerizing and loading.
Used railes R 50 R65. 1.5 lot size.
Metal scraps (HMS1&2) and used rails.
Mandrel bar plays a crucial role in producing large diameter seamless pipes in modern industries. In production line, it have to bear strong and complicate stretch, compressing touching stress and high temperature cold-hot yield stress under high speed cycling. Under these circumstance, chemical components, mechanical propertied, no-metallic inclusion, grain size, microstructure, ultrasonic test, size precision, surface finish, all these factories of steel are required very strictly. Mandrel bar is made from H13(4Cr5MoSiV1), With annual output of 15 thousand tons, its quality and service life have reached to world level of that. Our company is capable of producing a series of mandrel, such as MPM, PQF, FQM, with the diameter of 80~350mm, the length of 2500-17500mm. Equipment advantage: steel making (EBT+LF(VD)+ESR)-forging(formed by hydraulic press machine + forged by rotary forging machine)-annealing-rough machining ¨Cmagnetic test-heat treatment-ultrasonic test-finish machining-chrome plating-thread phosphating.
Our products include various rare metals products in form of plate, bar, rod, wire, pipe, crucible, sputtering target, machining part, and heat elements, and corrosion-resistance parts as well.
