2024 aluminum sheet & plate are considered the aircraft alloy because of its strength. It is readily formed in the annealed condition and may be subsequently heat treated. 2024 aluminum sheet possess good machinability and can be machined to a high finish. Since corrosion resistance is relatively low, aluminum alloy 2024 is commonly used with an anodized finish or in clad form (Alclad) with a thin surface layer of high purity aluminum. As an enhanced sheet for fuselage applications, Alclad offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. 2024 aluminum sheet is often used for applications in theaerospace industry.
Alloy 2124 aluminum plate is a high purity form of 2024 and is normally supplied in 1.50 6.00 plate. Available in T851 temper, this plate alloy exhibits good strength retention and creep resistance at elevated temperatures up to 350 degrees. Fracture toughness levels of 2124-T851 plate are significantly higher than 2024-T851. This alloy is recommended for those applications requiring better short-transverse ductility, high strength and good machinability and has excellent exfoliation corrosion resistance. Fatigue properties of alloy 2124-T851 are similar to those of 2024-T851.
tungsten carbide drawing dies feature
stable and trustable quality;
made from 100% virgin raw material;
all products go through in-process and final inspection;
free online technical service available;
Alloy 7050 aluminum plate is the principal choice for aerospace applications, especially in the 3-6 inch thickness range. It exhibits better toughness/corrosion resistance characteristics than the older, more established alloy 7075. Since it is less quench sensitive than most other aerospace alloys, this alloy maintains its strength properties in thicker sections while retaining good stress corrosion cracking resistance and fracture toughness levels. AMS 4050 is commonly associated with 7050, though various manufacturers require their own specifications.
1100 aluminum is the most commercially pure alloy of all the aluminum grades. 1100 aluminum coil and 1100 aluminum sheet are both available for various applications including chemical storage and processing equipemtn. Benefits of 1100 aluminum sheet & coil include a 99% or greater content of aluminum compared to other grades of aluminum. 1100 is a low strength aluminum alloy with excellent corrosion resistance. This grade is best used for welding, brazing and soldering but has poor machinability. 1100 aluminum has great finishing capabilities so it is a great choice for decorative purposes.
Alloy 7475 aluminum plate are a controlled toughness alloy whose values are 40 percent greater than alloy 7075 in the same tempers. This alloys corrosion resistance and fatigue behavior are also equal to, or better than, many of the other high strength aerospace alloys, and is for those applications that require a combination of high strength, superior fracture toughness and resistance to fatigue crack propagation.
Description
Place of Origin:
China (Mainland)
Brand Name:
CK
Model Number:
T-0123
Weight:
25 KG
Dimensions:
25Kgs/ingot
Chemical Composition:
Sn99.995%
Alloy Or Not:
Non-alloy
Secondary Or Not:
Non-secondary
Sn (Min):
99.99%
Name:
Tin Ingot
weight:
25kg per ingot
tin ingot purity:
99.99%
Features:
1> movable partition is modernized decoration style.it can separate the space speedly and
conveniently.and it has sound insulation and heat insulation and fireproof function;
2> the partition board is made from high density s/s frame, special made rubber, excellent sound
insulation cotton and finish board etc.the finish board is flat and hard;
3> the finish board is inserted in the aluminum track, assembled with multi direction wheels;the
board can be stored in may different ways;
4> it doesn't need track on the floor, we only hang the track on the ceilings and it can be at the
same plane with the ceiling decoration.it won't affect the whole decoration style;
5> around the board, there is sound insulation rubber, it can help to insulate the sound entering;
Finishes:
there are wide of range face finishes are available :melamine faced MDF or
plywood, fabric, carpet, fabric, artificial, leather,wood veneer, high pressure laminate,acoustic panel,white board ect., panels can also be supplied unfinished for field decoration,standard frame color is clear anodized aluminum,custom powder coating colors are available.
BUNGE movable partition wall is made of high quality anodized aluminum frame with environmentally composite materials.the panels move on a ceiling track with no requirement of floor guides or rails.,the panel has a standard thickness of 65 mm ,85 mm and 100 mm,and a width up to 1230 mm.Maximum height can reach 17 meters tall.
Common Applications:
1.studios, recording rooms, listening rooms, rehearsal rooms and more professionally interspace timbre projects.
2.theaters, indoor gymnasiums, discos, KTV rooms and more performance and entertainment location.
3.meeting rooms, offices, halls, hotels and more sound absorption and secrecy projects.
4.air-port, railways, bus-stops, workshops and more noise reduction projects.
About us:
Guangzhou Bunge Building Decoration Engineering Co.,Ltd is a professional company in manufacturing Movable Partitions.It also artistically designs and carefully does research and development,.The company has adopted the advance partition technology of USA,Germany and Denmark.We have professional staff with more than 10 years of experience in design,production and installation.
We would like to provide titanium bars in any grade and size.
We are authorized by each manufacturer to sell the titanium products in the world market and take responsibility for concluding a sales agreement with the buyers.
Products accord to asme, astm or din standard are available.
We can supply ti 6al-4v eli products which is able to use for medical equipment.
Also, other shapes titanium products are available, if you are interested in titanium products please contact us.
All of our products are made-to-order, so price, date of shipment, and minimum order quantity are just flexible and negotiable, please contact us at any time.
Aluminum formwork for building
Aluminum formwork
Panel thickness: 4mm
Weight: 18-22/kg/m2
Carring capacity: 60kn/m2
Main components: beam, column, wall, prop,
Stair, slab, other accessries
Model:aluminium alloy 6061-t6
Material: aluminium alloy 6061-t6
Size: wall panel: 50-400(w) x 2700 (h)
Deck panel: 400 (w) x 1200 (h)
Deck beam: 150(w) x 900/1050 (h)
We can also manufacture upon your requested design with different sizes.
Advantage:1. Light weight
2. Safe, fast and easy to assemble
3. Easy to maintenance and low cost
4. Great recyelable value
5.High quality concrete pouring(smooth concrete surface)
6. Environmental friendly
Aluminum Formwork For Utility Tunnel
Aluminum Formwork
Aluminum Alloy Formwork
Panel thickness: 4MM
Weight: 18-22/KG/M2
Carring capacity: 60KN/M2
Main components: Beam,Column,Wall,Prop,
Stair,Slab,Other accessries
Material: Aluminium Alloy 6061-T6
Size: Wall Panel: 50-400(W) X 2700 (H)
Deck Panel: 400 (W) X 1200 (H)
Deck Beam: 150(W) X 900/1050 (H)
We can also manufacture upon your requested design with different sizes.
Advantage:1. Light weight
2. Safe,fast and easy to assemb
le
3. Easy to maintenance and low cost
4. Great recyelable value
5.High Quality Concrete Pouring(Smooth concrete surface)
6. Environmental Friendly
Flat Tie
Aluminum Formwork Accessorie
Aluminum Alloy Formwork
Name: Standard Flat Tie / X Flat Tie / Nominal Wall Tie / Full Wall Tie
Material: #45 Steel / Q235 Steel / 40Cr
Surface Treatment: Hot Treated / Natural Color
Package: packed in bundle by pallet
Cetification: ISO9001:2000
Name:Standard Flat Tie / X Flat Tie / Nom
inal Wall Tie / Full Wall Tie
Material:#45 Steel / Q235 Steel / 40Cr
Surface Treatment:Hot Treated / Natural Color
Package:packed in bundle by pallet
Cetification:ISO9001:2000
