1.2767 tool steel is a higher carbon version of the standard 4.25% nickel oil hardening steel. It is a good quality tool steel that achieves high impact and compressive strength and is suitable for applications demanding extra wear resistance. With its characteristics of good full hardenability, good polishability and excellent toughness this cold work tool steel specification is widely used for plastic mould applications. 1.2767 tool steel typical applications and components include plastic moulds, cutlery dies, shear blades for heavy gauge material, cutting tools, drawing jaws and highly stressed coining tools.
A2/1.2363 tool steel is a 5% chromium medium alloy cold work tool steel possessing sufficient hardenability to be air hardened to 60 HRC surface hardness level with good depth of hardening. This widely used tool steel has low distortion in heat treatment, good machinability, good toughness for severe service, high abrasion resistance, and deep hardening properties in large sections. A2 has a fully spheroidized structure and has exceptionally low inclusion levels. A2 is available in de-carb free rounds, flats and squares, as well as drill rod and ground flat stock. Typical applications for A2 tool steel are blanking, forming, and trim dies, stamping dies, coining dies, thread roller dies, knurls, knurling tools, mandrels, master hobs, cold forming tools, spindles, shear blades, slitter blades, molds, punches, block and ring gauges, punch plates, reamers, brick mold liners, forming rolls, etc.
D2/1.2379 cold work tool steel is chrome-molybdenum-vanadium steel with big hardenability for hardening in oil and in air, especially high resistance to the wear (higher than by 1.2080), good cutting power, very good firmness in the pressure, lower toughness (but higher than by 1.2080). This steel shows good dimensional stability at the heat treatment, suitable for hardening to the secondary hardness (the possibility of nitriding). Further the steel is very difficult to sharpen, it works at the heat with difficulties and has a rather difficult workability in the annealed state. D2/1.2379 is suitable for making tools for cold cutting, i.e. all kinds of tools with the long durability for cutting on presses and punching of materials of smaller thicknesses and materials of high hardness (especially difficult-shape tools for cutting, e.g. transformer metal sheets and metal sheets from stainless steels), knives for plate shears for the sheet and strip steel up to thickness of 10 mm of sheared material, knives for wire cutting etc. Tools for mechanical working such as e.g. smaller girders and tools for drawing, all kinds of tools for transformation and punching of materials. Further the steel is suitable for simple and symmetric tools for pressing and pushing, tools for thread rolling, plain and profile rolls, swages and also for cold work. Cutting tools such as broaching thorns, profile knives and difficult-shape milling machines for lower cutting speeds and for treatment of nonmetallic abrasive materials. Further the steel is applied in the production of highly stressed molds and their components for working of plastic and powder substances, glass, porcelain and ceramic materials. By tools for crushing and grinding it is used for hammers of crushers and jaws for mild grinding and crushing.
Size: OD: 10-500mm,Id: 5-400mm H:1.5-100mm Material: yg6,yg8,yg10,yg12,yg15,yg20,yg25,ywn6,ywn8... Hardness: 89-91HRA Density: 14.5-15.0g/mm3 Application: mechanical face seal
Size: 5-300mm Material: yg6,yg8,yg10,yg12,yg15,yg20,ywn6,ywn8.... Hardness: 89-91HRA Density: 14.5-15.0g/mm3 Machine: OEM customize base on drawing
Cas no: 7440-33-7Eninec no: 231-143-9 Mf: w Grade standard:industrial, Purity:99.9%Appearance: black poweder Application:hard alloySize:40nm, 70nm, 100nm, 150nmShape:spherical Note: we can supply different size products of nano tungsten w nanoparticles according to client's requirements. Product performance Nano powder particles is uniform, high activity, high specific surface passivization treatment after the powder can be controlled in oxygen content of less than 1%.
Tungsten Rod Introduction: ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc... Tungsten specifications: 1. Shape: rod, bar, customized by drawings; can supply semi-finished or finished Tungsten bar. 2. Dimension: Per drawings; 3. Density: 16.85-18.85g/cc per customer requirement; 4. Composition: Pure Tungsten or W-Ni-Fe, W-Ni-Cu, per customer's requirement; 5. Standard Spec: ASTM-B777
U.S. Titanium machining part According to drawing or sample Gr2, gr5(ti-6al-4v), gr7, gr12 etc. According to drawing
U.S. Titanium casting Gr2, gr5(ti-6al-4v) etc. Astm b367 , bms 7-310, bms 7-310, asme sb367, etc. Technique: Lost-wax investment casting, lost-foam investment casting, which are capable of complicated shapes and small features, high precision and good surfaces. Equipment: wax injection machines, desiccant rooms, dewax machines, vacuum mel towers, sinter kiln and ultrasonic inspection machines etc. Size : as per clients, drawings and requirements , from 5g to 30kg. Process: wax injecting, slurrying , dewaxing , sintering, casting and furbishing.
1. Model name: 307#rpt beverage easy open end 2. Outside color:gold.Sliver 3. Thickness: 0.20-0.25 4. Outside diameter mm:92.85±0.15 5. Height mm:2.00±0.10 6. Countersink depth mm:3.00±0.10 7. Seaming compound weight mm:80±10 8. Compressive strength mm:0.06-0.0 9. Pop n:10-15 10. Tear n:29-35 11. Inside diameter of empty mm:83.3 12. Usage: packing dry food, milk powder, industry lube, farm products, etc. 13. Packing: paper tubes+ pallets.
1.Model number:502#peel off lid 2.Material:aluminum foil 3.Outside coating :sliver 4. Sample : free 5. Custom order: accept 6. Coating : in line with client's requirements 7. Feature : easy to tear, safety for hand, non spil 8.Inside diameter: 126.5mm 9.Outside diameter: 136.4±0.2mm 10.Usage: packing for all kinds of dry food (such as milk&coffee powder, seasoning , tea) , agriculture (like seed), etc. 11.Packing details:carton size 45.5*28.5*28.5cm , 800pcs/ctn
1. Model name: 401 tinplate easy open end 2. Inside coating:organosol laquer, aluminize lacquer, epoxy phenolic. 3. Outside color:gold.Sliver. 4. Carton size: 46*30*23cm. 5. Metal: aluminum 6. Sample : free 7. Custom order: accept 8. Coating : in line with client's requirements 9. Feature : easy to tear, safety for hand, non spil 10. Pcs/20'gp:900000pcs 11. Thickness:0.20-0.22mm 12. Outside diameter mm:108.95±0.20 13. Curl height mm:2.00±0.20 14. Seaming compound weigh:83±10 15. Compressive strength psi:=170 16. Countersink depth mm:4.75±0.15 17.Plane depth mm:3.70±0.15 18. Pop n:20-35 19. Tear n:60-95 20. Inside diameter of empty mm:98.9 21. Usage: packing for chemicals, industrial lube, oil ect. 22. Packaging details: 50*23*23cm/1000pcs/20kg/per carton, 950000pcs/20gp
Injection molded ferrite magnets Injection molded ferrite is another molding process of magnet category. Compared to injection molded ndfeb, the difference of injection molded ferrite lies in different magnetic powder utilized, therefore injection molded ferrite has lower magnetic properties due to ferrite features, but it costs much less than that of ndfeb. Features and benefits of injection molded ferrite L injection molded magnets can be of very complex shapes with high precision, typically, tolerance is+/- 0.005mm, it is suitable for high precision parts L it is a new technology to achieve adjustable magnetic properties, composite molding, elastic magnetization and high mechanical strength L by doing insert molding, magnetic material can be directly molded into or onto other assembly components without further assembly process L the material is harder to be cracked or chipped than sintered magnet
Quick details Material: aluminium technics: casting type: bushing place of origin: zhejiang, china (mainland) model number: type c brand name: hyrubbers connection: female shape: reducing head code: hexagon Packaging & delivery Packaging details: Cartons Aluminium camlock quick couplings Production description 1.Material:coupling body is aluminum 2.Thread:bsp/npt 3. Size:1/2"-8" 4.Type:a, b, c, d, e, f, dc, dp
Hot Rolled piece
Specification: Product name: high quality sintered hard ferrite magnet 1.Grade: y10t, y20, y25, y30, y30bh, y35 and etc. 2.Shape: disc, cylinder, block, ring, countersunk, segment, trapezoid, irregular shapes and more. Customized design (design proper magnets for clients specific requirements) 3.Sorts: we have disc ferrite magnets, segment ferrite magnets, ring ferrite magnets, block ferrite magnets, cylinder ferrite magnets, irregular ferrite magnets, sintered ferrite magnets, bonded ferrite magnets and many other series. High quality sintered hard ferrite magnet are manufactured by pressing, sintering, or injection molding. These magnets can be both anisotropic and isotropic. Anisotropic grades are oriented in the manufacturing direction and must be magnetized in the direction of orientation. Isotropic grades are not oriented and can be magnetized in any direction. The chemical composition is sro-6(fe2o3), strontium hexaferrite. The raw materials used to produce ferrite magnets are strontium carbonate and iron oxide both of which are readily available and low in cost. As a result, the use of ferrite magnets in most applications is more economical than other materials. Customized
Specification: 1. 4 inch magnetic floating globe 2. Material:abs 3. Business gift or decoration 4. The globe is floating and rotating in the air, by itself. 5. Logo: engraved lighting logo or printed logo Advantages: Magnetic floating globe (1) fits for different goal objects (2) smart installation technology enable flexible displaying (3) patented magnetic levitation tech (4) led light as the indicator operating status (5) auto permanent revolving system (6) higher quality and competitive price (7) new material developments and applications Place of origin: chongqing, china (mainland) brand name: seatrend model number: st-105 type: magnetic levitation shape: ball, ball application: moto magnet, business gift or decoration product: magnetic globe power source: electric globe size: 4 inch(10.5cm) sphere color: dark blue / light blue / black / golden substrate: abs plating gold base technique: floating and rotating substrate size: 18*18*3.5cm
Brass inserts Brass Molding Inserts Brass Plastic Molding Inserts Brass Plastic Molding inserts Brass Injection Molding Inserts Brass Injection Molding Inserts Brass proto molding Proto Molding inserts Brass inserts for cold Molding BRASS INSERTS BRASS MOULDING INSERTS BRASS MOLDING INSERTS PLASTIC MOLDING INSERT MOLDING PLASTIC MOULDING INSERTS THERMOPLASTIC MOULDING INSERTS INJECTION MOULDING INSERTS THERMOPLASTIC MOLDING INSERTS INJECTION MOLDING INSERTS COLD MOLDING INSERTS COLD MOULDING INSERTS INSERTS FOR MOLDED PLASTIC MOULDED PLASTIC INSERTS Hot insert molding Special Features : Threads as per International Go & Not Go Standards. Brass Stainless Steel Nuts Molding inserts molding nuts Deep Groove for maximum Pull Out Resistance. Inner Diameter (I/D) after Threads with very close tolerance to prevent unnecessary flush to enter into the inserts. Knurling Available : Diamond Straight Unidirectional Both blind and through inserts are available with no minimum Qty. Special Brass inserts Molding Inserts Molding Brass inserts Available We shall be pleased to develop Non-Standard Brass inserts components nuts screws studs fixings wood screws machine screws fasteners as per specific requirements. Materials Brass to BS 2874 / 2872 Finish Brass natural, Electro-Tinned, Nickel etc. Threads ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. Threads: 2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm 32mm 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 11/8" 11/4" 11/2" 13/4" 2" as per customers requirments
Machined Components Machined Parts Brass Machined Components Brass Machined Parts Turned Brass Parts to custom specification We offer Brass parts Turned Components to user drawings and prints We specialize in machined Brass components Brass Turned Components small big cast machined Brass parts components cast brass parts components forged brass turned parts components stamped brass parts components from miniature 1mm to 200mm Special Brass Components We shall be pleased to develop Non-Standard Brass components nuts screws studs fixings wood screws machine screws fasteners as per specific requirements. Materials Brass to BS 2874 / 2872 Finish Brass natural, Electro-Tinned, Nickel etc. Threads ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc. Threads: 2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm 32mm 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 11/8" 11/4" 11/2" 13/4" 2"
density 18+/-0.2g/cm3 95%W-Ni-Fe Ø2-100mm Standard Packing: bags + bubble wraps + cartons/drums