Keao SH series retarders is designed for special heavy bus, and truck.
Specification of Keao SH Series retarder:
1. Application:Torque ranges from 2800N.m to 3500N.m,adaptable for a variety of vehicles( weigh 22 ton~50 ton)
2. Applicable for long drive sgaft vegicles,to be installed between drive shaft.
3.Adapting middle axle structure,working indenpendently with almost no affect to the chassis
4. Imported axle and high temperature resistant lubricant extend its life span
5. Maintenance convenience without the necessity for adjustment of clearance
Different size and dimension is available.
Weight ranges 85-180kg
We have two kinds of permanent lifting magnet, which are common lifting magnet with 7 models and double-magnetic circuits lifting magnet with 6 models.
Specialty magnets for the movement of flat or round sheets manually.
Utilizing the incredible power of rare earth magnets to ensure optimal capacity with small size and light weight.
Range of capacities from 100kg to 6000kg with a 3-3.5:1 safety factor.
With v-shoe design for handling of round material easily.
Large and heavy work pieces can be operated safely by only one person.
Utilizing the incredible power of rare earth magnets to ensure optimal capacity with small size and lightweight
Range of capacities from 100 to 6,000kg with a 3-3.5:1 safety factor
Maintenance free with zero running costs
Safety locking devise in the ON position
With V-shoe design for handling of round material easily
Large and heavy work pieces can be operated safely by only one person
Available in 7 models
XQFQZQ100:
Rated lifting strength: 100kgf
Cylindrical lifting strength: 30kgf
Maximum pull-off strength: 300-350kgf
Operation temperature: <80C
Size: (W) 61 x (L) 92 x (H) 70 x (I) 145mm
Dead weight: 3kg
Carton size: 18 x 15 x 15cm
XQFQZQ300:
Rated lifting strength: 300kgf
Cylindrical lifting strength: 100kgf
Maximum pull-off strength: 900-1,050kgf
Size: (W) 92 x (L) 162 x (H) 96 x (I) 180mm
Dead weight: 10kg
Carton size: 26 x 23 x 18cm
XQFQZQ600:
Rated lifting strength: 600kgf
Cylindrical lifting strength: 200kgf
Maximum pull-off strength: 1800-2,100kgf
Size: (W) 120 x (L) 216 x (H) 118 x (I) 220mm
Dead weight: 20kg
Carton size: 31 x 31 x 20cm
XQFQZQ1000:
Rated lifting strength: 1,000kgf
Cylindrical lifting strength: 300kgf
Maximum pull-off strength: 3,000-3,500kgf
Size: (W) 148 x (L) 264 x (H) 138 x (I) 265mm
Dead weight: 37kg
Carton size: 43 x 37 x 30cm
XQFQZQ2000:
Rated lifting strength: 2,000kgf
Cylindrical lifting strength: 600kgf
Maximum pull-off strength: 6,000-7,000kgf
Size: (W) 172 x (L) 397 x (H) 168 x (I) 380mm
Dead weight: 80kg
Carton size: 51 x 31 x 38cm
XQFQZQ3000:
Rated lifting strength: 3,000kgf
Cylindrical lifting strength: 1,000kgf
Maximum pull-off strength: 9,000-10,500kgf
Size: (W) 230 x (L) 443 x (H) 215 x (I) 450mm
Dead weight: 160kg
Carton size: 62 x 37 x 46cm
XQFQZQ6000:
Rated lifting strength: 6,000kgf
Cylindrical lifting strength: 2,000kgf
Maximum pull-off strength: 18,000-21,000kgf
Size: (W) 296 x (L) 720 x (H) 266 x (I) 730mm
Dead weight: 398kg
Carton size: 87 x 38 x 51cm
Have 2 magnetic circuits so as to decrease damping force of the handle.
Range of capacities from 600kg to 6000kg with a 3:1 safety factor.
Available in 6 models.
Xqfpml600:
Rated lifting strength: 600kgf
Cylindrical lifting strength: 200kgf
Maximum pull-off strength: 1, 800kgf
Size (lx b x h x r): 160 x 296 x 76 x 220mm
Operation temperature: <80c
Dead weight: 21kg
Carton size: 31 x 31 x 20cm
Xqfpml1000:
Rated lifting strength: 1, 000kgf
Cylindrical lifting strength: 300kgf
Maximum pull-off strength: 3, 000kgf
Size(lx b x h x r): 190 x 365 x 86 x 260mm
Dead weight: 38kg
Carton size: 43 x 37 x 30cm
Xqfpml2000:
Rated lifting strength: 2, 000kgf
Cylindrical lifting strength: 600kgf
Maximum pull-off strength: 6, 000kgf
Size (l x b x h x r): 230 x 435 x 104 x 375mm
Dead weight: 82kg
Carton size: 51 x 31 x 38cm
Xqfpml3000:
Rated lifting strength: 3, 000kgf
Cylindrical lifting strength: 1, 000kgf
Maximum pull-off strength: 9, 000kgf
Size (l x b x h x r): 270 x 465 x 134 x 450mm
Dead weight: 120kg
Carton size: 62 x 37 x 46cm
Xqfpml5000:
Rated lifting strength: 5, 000kgf
Cylindrical lifting strength: 1, 650kgf
Maximum pull-off strength: 15, 000kgf
Size (l x b x h x r): 294 x 700 x 140 x 700mm
Dead weight: 280kg
Carton size: 80 x 35 x 45cm
Xqfpml6000:
Rated lifting strength: 6, 000kgf
Cylindrical lifting strength: 2, 000kgf
Maximum pull-off strength: 18, 000kgf
Size (l x b x h x r): 380 x 590 x 210 x 700mm
Dead weight: 360kg
Carton size: 87 x 38 x 51cm
Carton
116825 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
D(mm) deviation of diameter L(mm) Deviation of Length
16-20 +1.0 300-1500 +2
20-30 +1.5 250-1500 +2
30-45 +1.5 200-1500 +3
45-60 +2.0 250-1300 +3
60-100 +3.0 205-800 +3
Element Content(%)
Mo í¦ 99.95
Al 0.001
Ca 0.003
Cr 0.005
Cu 0.001
Fe 0.005
Pb 0.002
Mg 0.001
Mn 0.001
Ni 0.001
Si 0.003
Sn 0.003
Ti 0.002
It is fine and close product with grey metallic luster.Density>10.2g/cm3.
Used for glass industry.it can serve a long life in glass solution at1300íµ.Also used in the fields of rare earth industry.
Self-discharge Electromagnetic separator model series LMC12(RCDD) is designed for long term operating shift provided with self-discharge function and semi-sphere shaped magnetic field, installed with continuous operating tramp iron discharging conveyor which helps to throw the attracted magnetic material into the iron collection tray. It is suitable for removing the magnetic iron particles from the thicker bed of the material and material under bigger granularity such as ores, coals, hard cokes, limestone and etc.
1.Lifting Electromagnet Series LM5 for Lifting and Transporting Steel Scraps. Suitable for transferring cast ingots, steel balls and various kinds of steel scraps.
2.Rugged ¿Call-welded construction with all moisture proof.
3.Optimized design by computer with reasonable structure, higher suction weight ratio and low energy consumption.
4.Energizing coils processed by special technology with improved electrical property and mechanical property. Heat-resistant grade of insulating materials reach grade C with long service life.
5.Various structures and technical data are available based on the attached items under different conditions to satisfy the wide demands from the clients.
6.High temperature type electromagnet adopting unique method of heat-protection. Temperature limit of the attached items is increased from 600íµ to 700íµ, which expands the application range of lift electromagnet.
7.Easy and convenient installation, operation and maintenance.
8.We can manufacture all magnetic devices according to customers' requirement.
Molybdenum electrodes and molybdenum rod, It is find and close product with gray metallic luster.Density>10.2g/cm.
Used for glass industry. It can serve a long life in glass solution at 1300íµ. Also used in the fields of rare earth industry.
We are the leading manufacturer of magnetic lifters with the ce certificate in china. We have more than 6 yeares of manufacturing magnetic lifers from 100 kgf lifting strength to 6000 kgf. Also, we can offer oem and odm service according to customers or market's requirement. More than 70% of our products are sold to european and north american market.
Our magnetic lifters can guarantee that the security coefficient is no less than 3.5 times which is based on european safety standard. We also get the patent for the two-magnetic circuit lifters based on our special design.
