1.New technology, improve work efficiency. 2.Durable. 3.Excellent quality and competitive price. Technical parameter: Parameter dlm-5 Laminated thickness of stator 15mm-100mm Max outer diameter of stator 200mm Min adaptive core bore 30mm Highest slot full ¡ü80% Input (three-phase power) 380v/50hz Air pressure 0.5-0.8mpa Power 3700w Dimension 2300mm¡á740mm ¡á1500mm Weight auout 1300kg.
Diameter range: 100-1500mm Thickness: galvanized sheet: 0.5-1.2mm Stainless steel: 0.4-0.8mm Material width: 137mm Decoiler: vertical, max load: 1200kg Adding tendons: one or more(optional) Seam lock: located outside the ducts Production speed: 0-37m/min, adjustable Cutter: roller shear Drive system: cutting and turning over ducts adopt air-power; Compaction of feed rolls adopts hydraulic power Forming head mould: steel, aluminiun alloy is optional Total weight: 2000kg Outside size: main machine: 3.4*1.8*1.8m Discharge table: 2.1*1.2*1.1m Total power: 16kw, main motor: 15kw, hydraulic motor: 0.75kw, seam locking wheel motor: 0.12kw Electrical source: 380v/50hz/3ph Console: push-buttons panel.
Diameter range: 100-2000mm Thickness: galvanized sheet: 0.5-1.2mm, 1.3-2.0mm Stainless steel: 0.4-1.0mm Material width: 137mm(or 155mm) Decoiler: vertical, inner coil: 450-510mm Max load: 1200kg Seam lock: located outside the ducts Production speed: 0-25m/min, adjustable Cutting type: 1.Saw blade cutting 2.Plasma cutting Drive system: cutting and turning over ducts adopt air-power; Compaction of feed rolls adopts hydraulic power Forming head mould: steel, aluminiun alloy is optional Total weight: 2500kg Outside size: main machine: 3.4*1.8*1.8 Discharge table: 2.1*1.2*1.1m Total power: 27kw, main motor: 22kw, cutting motor: 4kw Electrical source: 380v/50hz/3ph Console: push-buttons panel.
Diameter range: 100-1500mm Thickness: galvanized sheet: 0.5-1.2mm Stainless steel: 0.4-0.7mm Material width: 137mm Decoiler: vertical, max load: 1200kg Adding tendons: one or more(optional) Seam lock: located outside the ducts Production speed: 0-37m/min,adjustable Cutter: roller shear Drive system: cutting and turning over ducts adopt air-power; Compaction of feed rolls adopts hydraulic power Forming head mould: steel, aluminiun alloy is optional Total weight:2000kg Outside size: main machine: 2*1.8*1.3m Decoiler: 1.5*1*1.6m Discharge table: 2.1*1*0.8m Total power: 16kw, main motor: 15kw, hydraulic motor: 0.75kw, seam locking wheel motor: 0.12kw Electrical source: 380v/50hz/3ph Console: touch screen.
1.Material: stainless steel 316 or stainless steel 304 2.Surface finish: brushed/satin or polished/mirror 3.Manufacturing methods: precision investment casting 4.We can also make it on the basis of your idea or drawings. Carton.
The hydraulic forging hammer is a new energy saving and environmental protection forging hammer. It can save more than 90% energy comparing with the steam forging hammers and the forging hammers with compressor. --roger(at)chinesehammers(dot)com--- The pressure of compressed Nitrogen is constant, and the hammer is operated just by controling the hydraulic system. When you feed blanks, the hydraulic pressure will lift the hammer head. When you hit the blank, the hydraulic pressure will unload fastly and the pressure of compressed Nitrogen and the gravity will drive the hammer head to hit the blank at a very high speed. The hydraulic forging hammer can promote the efficiency and production with good quality. The hammer has safety locking motion so that working is safe and convenient. As further, It can improve the working condition, which is environmental and good for workers. The advantage, structure and design feature of hydraulic forging hammers is as follows, 1;Energy conservation and environmental protection. 2;The operation is convenience,lowering and the act is agility 3;System work safety,it has fully safety locking motion 4;Special structure is more fair and more safety. wooden case.
Characteristic of Machine: 1. CE approved 2. Double laser heads, cut bidirectionally from top and bottom at the same time, with high cutting efficiency, also assure the cutting seam to be straight 3. Automatic tracing system for focus point, overcomes the barrier of surface uneven 4. Powerful software, like AutoCAD, CorelDraw, and Adobe Photoshop for unique designing. 5. Adopting imported guide rails, ballscrew transmission system, servo motor and our special designed software, insure steady performance 6. CNC operation, with high cutting speed and accuracy 7. Exhaust system to keep the working condition free of smoke pollution 8. Can cut max. 25mm thickness, especially perfect performance on 20mm plywood 9. With our multi-function bending machine, can realize the full automatic process of template making. Technical Parameters Model of Machine :HLD1208 Valid Size (mm) :1200*800 Laser Tube Type :CO2 Sealed Laser Tube Laser Power :300W Cutting Speed :0-200mm/s Power Supply :220V 10A Cutting Width :0.3-3mm(optional) Max. Thickness :25mm Color Separation :Yes Cutting Precision :¡À0.02mm Image Form :PLT, EPS, BMP, DXF Control System :Movement Control Board/CNC Transmission :ballscrew Driving System :servo motor Air Feed Means:air. Wooden Case.
Product Features: 1.Laser cutting is high power density ,better controlled no-contact processing. 2.Narrow kerf,small workpiece distortion. 3.High speed:100 times faster than linear cutting 4.Small heat affected zone,good dimension stability.Flat and handsome laser-slotted without later process 5.Steady performance:as a mature laser apparatus, suitable for Mass Serial Production. Specifications Model :RL-LCY500-2513 Processing scale :2500*1300mm Cutting thickness :0.2-6mm Max output power :800W Laser wavelength :1064nm Pulse frequency :1-300HZ Min.linewidth :0.15mm Electrical source :380V/50HZ/100A Cooling system :7p water cooling Max cutting speed :35mm/s Weight :3600kg. Wooden Case.
Metal frame, is a steel and wood, construction materials earthquake fire. Metal frame of high quality cold-rolled galvanized steel coil as raw material, rolling through a kind of decorative material, which material uniformity, high strength, steel degree of good corrosion resistance. Done in conjunction with gypsum board walls, suspended ceiling with the best materials. Name: HF50 Main and metal frame production line program 1. Rolling sheet metal thickness: = 1.2 mm. Second, the production line is mainly composed by: 1. Uncoiled - 2 sets 2. Forming the host - 2 sets 3. Hydraulic cutting system - 2 sets 4.4 sets of care rack 5.2 sets of control systems. Third, the production line is mainly composed of structural description: 1. Uncoiler: Single-support machine, manual open-book, screw concentric swelling structure. 1) maximum load: 3t. 2) the mandrel base diameter: set by the user. 2. Incision and cut off the hydraulic system: This machine is driven shear cylinder mold to achieve the effect of incision and cut off. All hydraulic components are produced by famous manufacturers. 1) die cut material: gcr12. 2) hardness: hrc58 ~ 60. 3) hydraulic motor power: 3kw. 3. Forming host 1) forming speed: 6 ~ 8 m / min. 2) Forming pass: main keel 16 times. Vice keel 12. 3) frame: adopt the national standard I-beam welded together. A) name: hot-rolled I-beam. B) specification: 28 #. C) standard: gb/t706-1988. 4) spindle: A) material: high quality 45 # steel. B) shaft diameter: |46mm. C) heat treatment: hb235 ~ 280. D) processing technology: rough heat treatment finishing. 5) Forming roll: A) material: gr15 (bearing steel). B) hardness: hrc 60 ~ 62. C) processing technology: rough heat treatment finishing.
smt,smt mounter, lead-free reflow soldering,lead-free reflow oven,reflow soldering, wave soldering,smt equipment,stencil printer,AOI,BGA repair stations,wave soldering machines, LED glue machine reflow ovens, solder reflow, pcb soldering, lead free soldering, lead free solders, pb free soldering, reflow furnace, smt mounter,smt chip mounter,smt shooter,wave soldering machines, reflow, LED equipment, LED machine, BGA rework stations solder paste,fluxes,Bar Solder, smt semi-automatic printer,solder paste,smt turnkey solutions,smt pick-place machine, Mindray Electronic equipment Co.,LTD. was founded in July,1999. Now, we have more than 260 employees , more 80 Skillful employees are bachelor degree or above , over 8000M2 manufactory area , all sorts of processing equipment surpass 60 sets, and have a strong ability in research and development and manufacture in SMT.
Side Push-out Series Model Nominal force(kn) Press Box size (L¡ÁW¡ÁH) (mm) Bale size (W¡ÁH) (mm) Bale weight (kg) Production (t/h) Power (kw) Y81T-63 630 1000¡Á600¡Á500 200¡Á200 28~35 0.9~1.1 7.5 Y81T-100 1000 1000¡Á700¡Á550 230¡Á230 42~53 1.2~1.5 11 Y81T-125A 1250 1200¡Á700¡Á600 300¡Á300 65-80 1.2~1.8 15 Y81T-125B 1250 1200¡Á700¡Á600 250¡Á250 50-62 1.2~1.5 15 Y81T-160 1600 1400¡Á900¡Á700 320¡Á320 70-85 1.5~2.2 22 Y81T-160A 1600 1600¡Á1000¡Á800 400¡Á400 110-150 2.0~3.5 22 Y81T-160B 1600 1600¡Á1200¡Á800 400¡Á400 130-180 2.0~4.0 15¡Á2 Y81T-200A 2000 1600¡Á1200¡Á800 450¡Á450 140-190 2.5~4.5 37 Y81T-200B 2000 1800¡Á1400¡Á900 450¡Á450 210-300 3.0~5.0 22¡Á2 Y81T-250A 2500 2000¡Á1400¡Á1000 500¡Á500 230-270 4.0~6.3 22¡Á2 Y81T-250B 2500 2000¡Á1750¡Á1000 500¡Á500 250-280 5.0~6.3 22¡Á2 Y81T-315A 3150 2000¡Á1400¡Á1000 500¡Á500 250-360 4.0~6.5 37¡Á2 Y81T-315B 3150 2000¡Á1750¡Á1000 500¡Á500 260-370 5.0~7.0 37¡Á2 Y81T-400 4000 3000¡Á2000¡Á1200 500¡Á600 250-380 6.0~8.0 45¡Á2 Y81T-500R 5000 2500¡Á1300¡Á800 500¡Á500 300-500 6.0~10.0 22+37. Container.
Parameter Unit : Q3512 Q3518 Q3525B The diameter of revolving table mm : §¶1200 §¶1800 §¶2500 The maximum weight kg : 500 800 100 Cleaning workpieces size mm : 3-5 800 150 QR3210 : 1.5-2.5 600 30.
The series of Q69 steel sheet shot blasting pre-treament line are mainly consist of warm-up, shot blasting and spray painting and drying process. It applies to shipping, car, motorcycle, bridge, machine etc. which is in the line of steel board, section and structure casting to wipe of surface rusting and painting art. Parameter Unit Q698 Q6912 Q6915 Q6920 The effective cleaning width mm 800 1200 1500 2000 The room feed-in size mm 1000 x400 1400 x400 1700 x400 2200 x400 The length of cleaning work piece mm 1200-12000 1200-1600 1200-12000 1200-12000 The speed of wheel conveyer(stepless speed variation) m/min 0.5-4 0.5-4 0.5-4 0.5-4 The thickness of cleaning steel sheet mm 3-60 3-60 1.5-60 3-60 The section steel specification mm 800 x300 1000 x300 1500 x300 2000 x300 The quantity of shot blasting kg/min 4 x180 4 x250 4 x250 6 x250 The first enclosed quantity kg 4000 4000 4000 4500 Roll brush adjusting height mm 200 200 350 450 Airiness capacity 22000 17560 19000 19550 Exterior size mm 25017x4500 x9015 12180 x4250 x7095 15200 x5370 x6797 30650 x6850 x9095 Totalpower except for dust cleaning kw 90 78.3 113.5 156.6./
45 deg single head CNC cut to length line.
Locks and pins for JCB ,Capterpillar, Komatsu , Hitachi , Hyundai , Daewoo , Esco , Case , Kobelco, Volvo Etc .
Parameter : GD-PM 50 Laser output power : 50-100W Laser wavelength : 1064nm Beam quality : TEM00 (M2:
Fiber Laser Marker Principle Fiber laser adopts a fully integrated design and merges all the components into a single fiunctional element. It has no optical power coupling loss and pollution, air cooling. It possesses merits of high efficiency, long lifetime and low maintenance. Features Excellent beam quality The beam quality of GD-FM Series Fiber laser marking machine is better than that of the conventional solid-state laser marking machine. It is output from the base model (TEMOO) and the focused spot size is 10um. And its divergence angle is 1 / 4 of the semiconductor pump. So it is especially suitable for precision and fine marking. Low utility cost The maximum photoelectric efficiency is up to 30%. The input power of this equipment is less than 500W which equals to 1/10 of lamp pump YAG laser marker and saves lots of energy consumption expense Zero maintenance Lightstar Fiber Laser Marker is maintenance free and unnecessary to adjust or clean lens. Long lifetime Fiber Laser Marker adopts laser diodes as pump source, its average working time can reach 100,000 hours. High processing speed The processing speed is 2-3 times faster than traditional laser marker. Applications Electrical appliances, electronic communications, auto parts, precision metal, jewelry gifts, glasses watches, instrumentsation, and bathroom ware etc Fiber laser marker specification Technical parameter Average output laser power : 5,10 ,20 or 30W (continuous or Pulse) Laser wavelength : 1064nm Power adjusting range : 10-100% Repetitive frequency : 20-100KHz Beam quality£¨M2£© : 1.4-1.8 Optical-electronic efficiency : 30% Marking range : 100X100 mm Marking depth : 0.01-0.2mm Min focus spot size : 0.01mm Min. character height : 0.2mm Repetitive accuracy : ¡À0.001mm Max. liner marking speed : ¡Ü7000mm/s Marking format : Figure, word, bar code, 2D, Date, shift, batch no, seri code, date, order of runs, lot number, serial number, file chaining Operating system : Support PLT¡¢DXF¡¢BMP ,SHX, TF library using SHX¡¢TTF character storage directly Dimensions (L*W*H mm) : 550¡Á900¡Á1200 Power requirement : 220V£¬50Hz/60Hz. Wood packing.
1.Material: ductile cast iron, gray cast iron 2.Casting process: resin sand costing, green sand casting 3.Machining: turning, lather, drilling, planer. grinding. 4.Surface finished: electroplate, baking varnish, spray-paint 5.Packing: As customer's demand 6.Weight:1----500kg 7. Standard: JIS DIN,BS and ANSI 8. ISO9001:2000 quality control and inspection .we can cast and process the casting parts according to the drawing and samples provided by the customers with excellent quality and competitive price. Pallet, according to customer's need.
Fast curvilinear cutting function: any curves can be cut with a fast and continuous speed, the motion process of laser heads just like a top level speed racers racing aside a beautiful arc. Fully support CAD, CORELDRAlMGERBER and TAJIMA design software, friendly man-machine interface, close to the industries demands. Laser Type : domestic seal CO2 laser tube laser power: 80W Cooling Method, water-cooled 1200mm*800mm cutting areas: 1000mm*800mm graving speed: 0-64000£¨mm/min£© cutting speed: 0-36000£¨mm/min£© machine size: length 1800mm, width 1260mm, height 1150mm Gross weight: 230kg net weight: 200kg max power supply: 220v/50-60HZ,10A Minimum forming words: 2 x 2mm for Chinese characters, 1 x 1mm for letters resolution ratio: less than 4000 dpi positioning accuracy: less than 0.05m Hang line number: 90 lines total power: less than 1250W operating temperature: 0~45¡æ Operating humidity: 5~95%(free of condensed water) Graphic file format : BMP,JPGE,PLT,CDR,DWG,DXF,DST 1400mm*1000mm*1200mm.
Parameter Unit Q326 Q3210 QR3210 Productivity T/h 0.6-1.2 3-5 1.5-2.5 Loading weight kg 200 800 600 The maximum weight of one piece kg 10 150 30 Diameter of roller mm ¬¶650 ¬¶1000 ¬¶1000 Available capacity m©ø 0.15 0.4 0.3 Pill impelling volume kg/min 100 250 250 Dedusting air volume m©ø/h 2200 6000 5000 Power dissipation kw 12.6 32.6 24.3 Appearance dimension mm 3681x1650x5800 3644x2926x5856 3972x2600x4768 Machine total weight kg 2340 7400 5843.
