Place of Origin: Hunan, China (Mainland)
Brand Name: APPLECARBIDE Carbide Turning Inserts/ Cemented CarbideTurning Inserts
Model Number: SNMG Material: Fine grain tungsten carbide matrix
Usage: External Turning Tool
Hardness: Above 90HRA
Coating: TiCN / Al2O3
Product Name: cemented carbide turning/ carbide inserts turning blade SNMGSeries
Workpiece Material: cast iron and steel Application: for roughing, semi-finishing
Sintering: HIP sintering
Vc: 100-80M/min
ap: 1.5-5mm
Stock: available
Place of production: ZhuZhou city
Certificate: ISO9001
Life Time: GOOD
Place of Origin: Hunan, China (Mainland)
Brand Name: APPLE
Material: Carbide, Tungsten carbide
Diameter: dia from 1mm-20mm
Type: End Mill
Coating: TiCN, Nano TiAlN coating, TiAlN coating, AlTiN coating
Overall Length: 50-150mm
Product name: factory price of carbide end mill/carbide endmill/carbide end mills
Chemical composition: WC, Co
Tool part: cobalt drill bits
Appilcation: for aluminum cutting and maching Flute:1, 2,3,4,6 flutes
Sinter: HIP sintering
Certificate: ISO900
Description of carbide end mill/end mills/endmill:
1, Chip pocket wih unique shape exerts excellent performance even in slot and cavity machining.
2, Sharp cutting edge and large helical angel design effectively prevent built-up edge.
3, Anti-vibration design of whole edge can suppress the charttering during machining and improve surface quality.
End tooth type of carbide end mill/end mills/endmill :
2-flute flattened end mills
2-flute ball nose end mills
2-flute R end mills
3-flute flattened end mills
3-flute R end mills
4-flute flattened end mills
4-flute ball nose end mills
4-flute R end mills
6-flute flattened end mills
Machining operation of carbide end mill/end mills/endmill :
flattened end mills for side machining
flattened end mills for shoulder machining
flattened end mills for straight slot machining
flattened end mills for deep slot machining
ball nose end mills for profile machining
ball nose end mills for cavity machining
ball nose end mills for slot machining
ball nose end mills for deep slot machining
R end mills for side machining
R end mills for slot machining
R end mills for profile machining
.(Shanghai Yousteel Group Co.,Limited.)are the technical cooperation company of Shanghai No.5 Steel and Shanghai Iron & Steel research institute.
We mainly in manufacturing and selling stainless steel and nickel alloy steel. Factory has full sets of production line. We can supply pipes, tubes, rods, plates, forgings, flanges, fittings, wires and so on.
We are ISO9001:2008 certificated. We adhere to the principle of "being honest and faithful, increase the quality of products." and the advantage of "full kinds, full specifications, good price, high quality and good service". We have set up good business relationship with America,Germany, France, England, Japan, and so on. Our products are widely used in industries of oil, chemical, electricity,food, machinery, nuclear power, spaceflight, war industry, medicine, construction etc and are highly appreciated by our domestic and abroad customers.
.(Shanghai Yousteel Group Co.,Limited.)are the technical cooperation company of Shanghai No.5 Steel and Shanghai Iron & Steel research institute.
We mainly in manufacturing and selling stainless steel and nickel alloy steel. Factory has full sets of production line. We can supply pipes, tubes, rods, plates, forgings, flanges, fittings, wires and so on.
We are ISO9001:2008 certificated. We adhere to the principle of "being honest and faithful, increase the quality of products." and the advantage of "full kinds, full specifications, good price, high quality and good service". We have set up good business relationship with America,Germany, France, England, Japan, and so on. Our products are widely used in industries of oil, chemical, electricity,food, machinery, nuclear power, spaceflight, war industry, medicine, construction etc and are highly appreciated by our domestic and abroad customers.
DIN1.2379 tool steel Materials and Manufacture:
ELECTRIC ARC AND VACUUMDEGASSING
DIN1.2379 tool steel Hardness requirement:255HB
D2 tool steel Macrostructure:
In accordance with the latest issue of PracticeA561, free of excessive porosity, segregation, slag, dirt or other nonmetallic inclusions ,pipe, checks, cracks, and other injurious defects.
DIN1.2379 tool steel Decarburization:
In accordance with the latest issue of Guide E3
Free of scale and decarburization.
DIN1.2379 tool steel Cleanliness: with the latest issue of Test Methods E45. The permissible limits shall be agreed upon between seller and purchaser.
DIN1.2379 tool steel Shape: round bar,flate
DIN1.2379 tool steel Size: Hot Rolled 12mm-120mm ,
Hot Forged Round 80mm -500mm
Our companies are competent enough in the supply of Pure Lead Ingot which are being produced from Raw Lead Bullion / Remelted and Secondary Lead Ingots / Lead Scraps through Metallurgical process. The strength we have in our Refining Process is the purity Level we maintain minimum at 99.91% by weight but achieves purity level of 99.95% in most of cases.
1. Introduction :
1) Ferro Manganese is an alloy of Iron and manganese, with manganese between 65.0%~90.0%, as deoxidizer and alloying element additive.
2) Divided into furnace ferromanganese and blast furnace ferromanganese.
3) Main categories: high carbon ferromanganese (carbon 7%), medium carbon ferromanganese
(carbon 1.0~1.5%), low
carbon ferromanganese (0.5% carbon), metal manganese, Spiegel, Silicon-manganese alloy.
4) International general standard for carbon ferromanganese containing mananese with 75 ~ 80%. To adapt to
the
conditions of low grade raw ore, China provides manganese lower grades (furnace ferromanganese
manganese containing more than 65%, blast furnace ferromanganese manganese containing more than 50%).
5) With the particle size of 10-100mm or natural block delivery, special requirements available.
1) Mainly used as alloy additives and deoxidizer in steelmaking.
2) Used as alloy agent ,widely applied to be widely applied to alloy steel, such as structural steel, tool steel, stainless and
heat-resistant steel and abrasion-resistant steel.
3) It also has the performance that it can desulfurize and decrease the harmfulness of sulfur. So when we make steel and
cast iron, we always need certain account of manganese.
RMS Group are a medium to high volume Screw Machine Parts & Components supplier who produce Brass Turned Parts, Brass precision Turning components to specific drawing tolerances. Due to sound engineering and innovative flair, we can solve manufacturing requirements of the most technically demanding parts.
In addition, our Inspection Department has a comprehensive stock of gauges, clocks and micrometers etc, In many instances we work closely with our customers during the design stage of their product, to ensure that the most economical component is produced with respect to shape & standard material etc
1.Material: Sintered Neodymium-Iron-Boron;
2.Grade:N35-N52,35M-50M,35H-48H,33SH-45SH,30UH-40UH and 30EH-38EH;
3.Shape: ring,block,disc,segment,strip and so on;
4.Size: as your requirement, large to about 200mm;
5.Magnetization direction: through diameter or thickness, width, length;
6.Coating: Ni (NiCuNi), Zn, Silver,gold, copper, epoxy and so on.
7.Sample lead time: about5-15days;
8.Delivery time: 20-30days after payment
9.High flux, High remanence, high coercive force, high energy, high resistance to magnetic demagnetization, Low temperature coefficient and low loss of irreversible, excellent cost to performance ratio, low price & good quality
Specifications
high performance countersunk ring magnet/sintered NdFeb magnet with great low prices
-Superior resistance to high temperature
- Competitive price
-Fast Delivery
Product Name: cuntersunk ring Neodymium Magnets/countersunk ring NdFeB Magnet/Strong countersunk ring Neodymium Magnets/Motor countersunk ring NdFeB Magnets/Permanent Magnets/Rare Earth Magnets
Applications: Widely used in different applications, such as sensors, motors, rotors, wind turbines/wind generators, loudspeakers, magnetic hooks, magnetic holder, filters automobiles and so on.
Material: NdFeB (Neodymium Iron Boron)
Magnetic properties: High coercive force, the max operation temp is up to 200 degree centigrade or 380 curie temperature
Shape: contersunk ring
Size: According to customer's requirements.
Tolerance in size: +/-0.1mm (also can be made as per client's requirements)
Type of coating: Ni ,Zn ,gold ,epoxy ,Ni-Cu-Ni, etc.
Direction of Magnetisation: According to customer's requirements.
Free of harmful substances according to ROHS Directive 2002/95/EC
Exempt from registration according to REACH.
Package size: According to customer's requirements.
Custom made are acceptable. When you send enquiry, Pls Indicate the Outer radius, Inner radius, Height, Angle, the grade, the coating, the quantity of the magnet you required. We will send you our best offer for your reference.
We are also very delighted to send you some samples for your testing if you need.
SMC Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
1)SMC Standard
2)Customization
Total resistance against corrosion
Ensuring uniform earth contact resistance throughout the entire lifetime of the installation
Optimal electrical conductivity
Mechanical strength
Continuous electrode
Technical specifications:
Type of earthing: sealed maintenance free chemical filled earthing electrode.
Diameter of the pipe: 48mm
Thickness of the pipe: 3.9mm
Length of the pipe: 3000mm
Size of the conductor: (30x6) mm, 3100mm long
Terminal diameter: 14mm
Chemical used in the pipe: ccm approximate weight-7kg
