Metal Metal Products Suppliers and Manufacturers

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Dear buyer, Thanks for the interest in our quality Copper Cathodes 99.99% purity(Electrolytic, Grade A). We can supply you on a consistent basis. Monthly Quantity & trial order: 10,000 tons Pacakaging:Package in accordance to standard export package Delivery : AWSP Inspection:SGS or any other equivalent inpection agency *** The buyer must provide the POF to us to allow his/her rep to inspect the goods.********* Price: PRICE AGREED AS LME MINUS 15(FIFTEEN Percent) Payment term:IRREVOCABLE CONFIRMED,ASSIGNABLE,DIVISIBLE TRANSFERABLE STANDBY LETTER OF CREDIT FROM ANY PRIME BANK PAYABLE AT DESTINATION PORT. ####NB##### We do not offer 2% performance bond because we are sole responsible for the product delivery to your destination port and ONLY then is the payment release. If you require a 2% PB, you will have to make a deposit payment of 5% of the shipment,and 95% payment will be be at destination port. Kindly issue an ICPO + CIS + POF

Dear buyer, Thanks for the interest in our quality Copper Cathodes 99.99% purity(Electrolytic, Grade A). We can supply you on a consistent basis. Monthly Quantity & trial order: 10,000 tons Pacakaging:Package in accordance to standard export package Delivery : AWSP Inspection:SGS or any other equivalent inpection agency *** The buyer must provide the POF to us to allow his/her rep to inspect the goods.********* Price: PRICE AGREED AS LME MINUS 15(FIFTEEN Percent) Payment term:IRREVOCABLE CONFIRMED,ASSIGNABLE,DIVISIBLE TRANSFERABLE STANDBY LETTER OF CREDIT FROM ANY PRIME BANK PAYABLE AT DESTINATION PORT. ####NB##### We do not offer 2% performance bond because we are sole responsible for the product delivery to your destination port and ONLY then is the payment release. If you require a 2% PB, you will have to make a deposit payment of 5% of the shipment,and 95% payment will be be at destination port. Kindly issue an ICPO + CIS + POF

Dear buyer, Thanks for the interest in our quality Aluminium Ingots 99.97% We can supply you on a consistent basis. ORIGIN: EUROPE LOADING PORT: MONTHLY & TRIAL ORDER: 5000 TONS -10,000 TONS PACKAGING: BULK INCOTERM: CIF DESTINATION PORT:AWSP TRANS-SHIPMENT IS ALLOWED INSPECTION:BY SGS ATH THE SELLER\'S EXPENSE AT PORT OF LOADING. CIF RATE: LME rate Minus 15( fifteen percent) PAYMENT TERM: IRREVOCABLE CONFIRMED & TRANSFERABLE LETTER OF CREDIT ISSUED UNDER MT700 *** We do not offer 2% performance bond because we are sole responsible for the product delivery to your destination port and ONLY then is the payment release. If you require a 2% PB, you will have to make a deposit payment of 5% of the shipment,and 95% payment will be be at destination port. Kindly issue an ICPO + CIS + POF

steel threaded rods are used in a variety of applications, for plumbing industry, for fire fighting, for hvac., for home building.

Technical Specification Value Units Product Copper Cathodes Copper Cu 99998 Cobalt Co 07 ppm Arsenic As 29 ppm Lead Pb 23 ppm Nickel Ni 22 ppm Sulfur S 24

Our High-grade Iron Ore from South Africa is renowned for its exceptional purity and consistent quality, making it an ideal choice for steel production and various industrial applications. Meticulously extracted and processed, our iron ore ensures optimal performance and reliability in every use, meeting the stringent standards of the global market.

Introducing our high-quality A7 Aluminum Ingots, sourced directly from South Africa, ideal for various industrial applications. With a purity level of 99.7%, our aluminum ingots meet the highest standards for manufacturing and construction needs. Produced through advanced manufacturing processes, these ingots ensure excellent performance, durability, and consistency, meeting the stringent requirements of the global market.

Our copper cathodes boast purity levels ranging from 99.97% to 99.99%. Complying with international standards like BS EN 1978:1988, GB/T 467-2010, and ASTM B115-10, they are meticulously crafted to dimensions of 914 mm x 914 mm x 12 mm (approx. 36 inch x 36 inch x 0.5 inch) with a weight of 125 kg per sheet. Each pallet contains approximately 2 MT, while a container holds around 20 MT net weight and 22.2 MT gross weight. Trust our high-quality copper cathodes for reliability and precision in industrial applications.

Product Name: Aluminum Ingots Specifications : Grade: A7 Primary Aluminum Ingot, Requires A Minimum Aluminum Content Between 99.70-99.85, Quality Requirements: A00/a7 Aluminum Ingot Composition Table A7 Aluminum =99.7% Iron =0.16% Silicon =0.15% Copper =0.01% Zinc =0.05% Titanium =0.02%; Packing Size Is: 1160*90*90mm Weight 25kg Place Of Origin Requirement: Russia

Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides. Ores containing very high quantities of hematite or magnetite, typically greater than about 60% iron, are known as natural ore or direct shipping ore, and can be fed directly into iron-making blast furnaces.

Aluminum Sandwich Sheet: Aluminum Sandwich Sheet Direct From Producer what you see is what you get. Product Description: Aluminum Sandwich Sheet Direct From Producer 0.18 3mm and 0.28 3mm mostly direct shipment Load 1: 15 pallets 1000x1200 = gross weight 18804kg 22bags pigtails = gross weight 4274kg Total gross weight 23078kg Load 2: 14 pallets 1000x1200 = gross weight 17837kg 25 bags pigtails = gross weight 5242kg Total gross weight = 23079kg Load 3: 15pallets 1000x1200 = gross weight 18133kg 23bags pigtails = gross weight 4947kg Total gross weight = 23080kg Additional Information: Packaging : Loose loaded Color : See Picture Contamination : Production Scrap Weight per container : 23 Payment Conditions 2 : 30% advanced payment rest direct after draft BL Availability : 65 Availability /Month : 65

Specification: Material: Quality Copper wire Wire Diameter: 0.30mm, 0.25mm, 0.20mm Weight / spool: 3 kg, 5 kg, 7 kg, 15 kg, 20 kg Tensile strength: 1000 N / mm2, 900 N / mm2, 500 N / mm2, 450 N / mm2, N / mm2 Usage: Electrical, light industry, machinery, building industry, national defence industry Copper Scrap is important sources of raw materials. All kinds of it can be recycled

Product Name aluminum ingot Category Remelting aluminum ingot Grade AL99.90, AL99.85, AL99.70 Standard GB/T1196â??2008 Size Size can be customized according to customer needs Net weight 10KG--1000KG Purity reference standard Shape bar ingot, round ingot, plate ingot, T-shaped ingot and so on. Application Widely used in construction, electricity, packaging, transportation Delivery time Within 7-15 workdays after receiving deposit or L/C Price term

Hey, I have access up to 150,000 MT a month in Iron Ore Direct or currently 300,000 MT in bulk. I have Report and even pics of the mine and operation... I would love to help you. I also have 50 MT of Tin Ore.