Item value Brand Name oem Model Number 3362212210211 Type :UBC Aluminum Scrap Weight 25kg Al Content (%) 99.9 Product name High Purity Aluminum Material Alloy 6063 Al Content (%) 99.99 Aluminum scrap Aluminum Scrap_aluminium Scrap Color Silver White Quality Excellent
1.copper Wire Scrap 2.copper Wire,tube,plate,etc 3.high Quality:99% 2.copper Scrap 99% High-quality Cable Scrap With Almost No Impurities Single Crystal Copper Wire 1.pure Copper Scrap 2.good Fatigue/abrasion/corrosion Resistance 3.be The Bearing,switch,frame Millberry Cu 99.9%min Wire Diameter: 0.30mm, 0.25mm, 0.20mm Competitive Price. Copper Scrap 99.9% Specification: Copper Wire Scrap, (millberry) 99.99% At A Purity Of 99.98% Min. 99.99% Max. Copper: 99.9% Carbon: 0.03% Coblet:
Second Quality Railway Steel HMS2 R50/R65 CODE 730 210 000 000 The rails are brand new and only called used rails because of their anomalous sizes. The rails are cut in different sizes, as they did not pass the test of conformity of measurements due to inequalities. Therefore, rails are not suitable as railway track, but not classified as scrap. we can also provied : rebar steel hot rolled steel sheets Galvanized steel billet steel cold steel Rolled sheets procedure : 1/ Buyer send LOI to the seller. LOI must be from the end buyer and indicates inside the payment method chosen below. 2/Seller issues FCO (available 7 days) 3/Buyer signs FCO and accepts fees proforma invoice indicates all the transaction details agreed after in the SPA and it's the document needed by buyer when start the processus for issuing the deal. 4/Buyer pays fees 1340 $ per ONE million ton to the seller to issu a commercial invoice, please note this amount is refundable after acceptance of the LC by the seller's bank. 5/Paiement terms : By issuing a confirmed LC MT 700 with full amount (confirmed, not delay and irrevocable), as per the proforma invoice�¢??s terms and conditions by the buyer. or issuing a revolving LC MT 760 with the bank guarantee to take all the quantity states on the proforma invoice has to be not less than 20 % of the value of the proforma invoice. Possibility to negociate with DLC. 6/ Seller issues a SPA the buyer must be returned ywith 7 days. 7/ in case of requesting any documents, inspection certificate, etc. property rights, inspection of the goods, requesting a visit or video, the buyer can claim them by sending pre-advice bank draft MT 705, OR among the conditions of the letter of bank credit, confirmed bank, with the full value of the proforma invoice and its conditions
Origin - India and China For price, specification and other details please contact us
This kind of wire is widely used for making handicrafts, woven wire mesh, forming fencing mesh, packing products and other daily uses
We excel in all types of powder coatings for aluminium
Steel turnings: Machine shop turnings are clean steel or wrought iron turnings, free of iron borings, nonferrous metals in a free state, scale, or excessive oil. HSS drill bits are made from carbon steel with the addition of other elements such as chrome and vanadium, allowing them to be used at high drilling speeds. HSS bits can be used to drill iron, steel and other metals such as brass, copper and aluminum alloy. They can also be used to drill plastic. HSS chip and inserts HSS Grades: M2 scrap, M1 scrap, M7 scrap, M42 scrap, T-15 scrap, D2 tool steel scrap
Steel turnings: Machine shop turnings are clean steel or wrought iron turnings, free of iron borings, nonferrous metals in a free state, scale, or excessive oil. HSS drill bits are made from carbon steel with the addition of other elements such as chrome and vanadium, allowing them to be used at high drilling speeds. HSS bits can be used to drill iron, steel and other metals such as brass, copper and aluminum alloy. They can also be used to drill plastic. HSS chip and inserts HSS Grades: M2 scrap, M1 scrap, M7 scrap, M42 scrap, T-15 scrap, D2 tool steel scrap
Old thin steel scrap predominantly less than 6 mm thick in sizes not exceeding 1.5 x 0.5 x 0.5 m, prepared in a manner to ensure direct charging. If greater density is required, it is recommended that maximum 1 meter is specified.
Shall consist of clean sound Muntz metal tubing which may be plated or unplated, free of nickel alloy, aluminum alloy, and corroded material. Shall have a copper content of not less than 55%, a lead content of not more than 1%, and shall be free of aluminum bronze and silicon bronze.
Barbed wire size: 1.8 mm wire diameter515 m length 16.4 kg/roll. Barbed wire size: 1.8 mm wire diameter845 m length 27 kg/roll. ... Double strand traditional twist barbed wire. Line wire diameter: 2.5 mm. Barb wire diameter: 1.6 m. Barb spacing: 15 cm. Zinc coating: 60 g/m2. Length: 270 m. Weight: 25 kg.
UPERIOR FLUX NUMBER No. 601-Powder DESCRIPTION Silver brazing powder flux REC. BASE METALS Ferrous, stainless steels, copper and carbides REC. FILLER METALS BAg, BCuP REC. TEMP RANGES 450-850 C / 900-1600 F SPECS. AMS 3410; AWS A5.31-91, Type FB3F; O-F 499, Type B SDS Link
Sizing of Telecommunication Bonding Backbone (TBB) TBB length FT Grounding Conductor Size (AWG) DC Resistance Per 100 Ft (Copper Conductor) ShortTime Rating (A) 8 0.0778 391 < 13 Ft 6 0.0491 621 14 - 20 Ft 4 0.0308 988 21 -26 Ft 3 0.0245 1245 27 - 33 Ft 2 0.194 1571 34 - 41 Ft 1 0.0154 1981 42 - 52 Ft 1/O 0.0122 2499 53 - 66 Ft 2/O 0.00967 3150 > 66 FT 3/O 0.00766 3972 4/O 0.00608 5008 Kcmil 250 0.00515 5917 300 0.00429 7101 350 0.00367 8284
Wire Material FeCrAl Alloy Color Golden / Silver Appplication Industrial Furnace / Muffel furnace / Ovens Wire Gauge 6 swg to 19 swg Temperature Withstand Upto 1300 Deg C
Manganin is a trademarked name for an alloy of typically 84% copper, 12% manganese, and 4% nickel. Manganin foil and wire is used in the manufacture of resistors, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance value and long term stability.
Thickness : 0.010-0.099mm Width : 3-300mm *Depends on grade and thickness. Contact us for more details.
metal powders suitable for AM are the spherical geometry of the particles resulting from the gas atomisation and a particle size distribution according to the layer thickness, usually between 10-50 µm.
Tubing shall be in the fully heat treated condition as received from the mill. Heat treatment may ne annealed, normalized, or normalized and tempered per the ASTM Specification used. 2) Welded tubing conforming to ASTM A 214 or A 226 is an acceptable alternate to seamless tubing, subject to prior approval from OWNER.
Tensile Strength: 480 N/mm2. Elongation: 33% (Note: 5.5 mm wire rod before wire drawling). Elongation: 5-6% (Note: Diameter 3.3 mm wire rod drawling). Chemical: Carbon: 0.09% Si: 0.17% Mn: 0.57% P: 0.024% S: 0.02%.
Bonding jumpers shall consist of 100 mm (4 inches) wide copper strip or two 6 mm² (10 AWG) copper conductors spaced minimum 100 mm (4 inches) apart. Use 16 mm² (6 AWG) copper where exposed and subject to damage. B. Comply with the following when shielded cable is used for data circuits.
