MS2000 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer. It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature. Usually not need a primer before apply. It could adapt to thermal expansion and contraction duo to inherent elasticity, It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.
300ml cartridge, 24 cartridges/carton 1950 cartons/20'GP without pallets, 1600 cartons/20'GP, 80 cartons/pallet 590ml sausage, 20 sausages/carton 1100 cartons/20'GP 200L drum 75 drums/20'GP
Definition Silicones are synthetic polymer containing alternate silicone and oxygen atoms as its backbone. Silicones are made from silicon (a metal obtained from silica sand) and methyl chloride (an organic compound) in a process known as the direct process. The Silicone sealant in the uncured state normally looks like a thick paste or cream. After curing the paste turns into an impressive rubber. Applications Silicone sealant are used as a form-in-place gaskets for engine & transmission applications, sealing of exterior joints, aquarium joints bonding, sealing of bath tubs, construction and glazing application, electrical potting & encapsulation, mould making, etc. Curing Mechanism RTV silicone systems use humidity or moisture in the air during curing and cannot be accelerated using heat (excessive heat in the curing process can be detrimental). Small amounts of by-product are also produced. The cure process will only take place if the material is open to the atmosphere and curing will be adversely affected if access to humidity is removed prior to the completion of the cure process. Provided product types One component RTV silicone sealant Two component RTV silicone sealant Packing, storing, shelf life and transport Available packing sizes vary from 25 g to 25 kg, packed in lacquered coated aluminium tubes, HDPE cartridges and epoxy coated MS drums. Store products at room temperature (20C to 35C). Shelf life can vary from 4 - 12 months. They are safe to transport by road, air and sea.
Silicone sealant Appearance (uncured) : Paste Components : One component-requires no mixing Temperature resistance : -50C to +250C Typical application : Gasketing compound for automotive service market
Silicone sealant Appearance (uncured) : Paste Components : One component-requires no mixing Temperature resistance : -50C to +250 C Typical application : Gasketing compound for automotive service market
AS606 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity. Sealing of low movement joints between various construction materials(wood, concrete, brick etc.) Sealing joints between windows, walls, doors etc. Filling cracks in walls and on ceilings.
100E Universal Silicone Sealant 100E is an one-component acetoxy cure silicone sealant for a range of general sealing and glazing applications. It provides a strong adhesion and suitable for use on common non-porous building materials. Stays permenantly elastic after curing. Remains flexible in low and high temperatures. Resistant to temperature exteremes. Resistance to aging, cracking and discoloring.
905N a neutral cure, premium performance silicone sealant designed for gap filling and sealing in a wide range of use in building and construction. It combines the advantages of outstanding adhesion to building materials and non-corrosive and odorless 100% solventless silicone. Excellent weatherproof and UV resistant. No Cracking or Shrinking,Water resistant. Very low odor and noncorrosive. Excellent flexibility and adhesion to numerous porous and non-porous. Substrates for large scale construction and glazing applications. Resistant to temperature extremes (-60 C to +180 C) Fast curing, low modulus, high elasticity. High viscosity non slump formula.
Akfix 647FC is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, wood etc. Permanently flexible Non-sag consistency - Exceptionally thixotropic Non-sticky / does not pick up dirt No change in volume Easy to gun, can be easily smoothed Over-paintable
We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized outer or inner packaging. This product features: this product is made of silicone rubber modified silicone tube with heat shrinkage performance, not only has the general excellent performance of silicone tube itself, such as high temperature resistance, high pressure resistance, soft and elastic, but also has the heat shrinkage performance, good mechanical properties of puncture damage resistance, as well as long-term use is not easy to aging and other characteristics. Therefore, this product can be used in these fields: instruments, household appliances, aerospace, military, automotive manufacturing, electrical components, transformers, motors and other insulation, protection, etc. We guarantee reasonable prices and satisfactory quality, making it a good fit for your own brand. We can offer: - Competitive prices - High quality products - Sample orders accepted - Secure payment and delivery worldwide - Free shipping for bulk orders For custom production and any questions, please feel free to contact! Looking forward to be your supplier in China and have a long term cooperation. Contact us:Mors
A) Type of Wafer >Wafer : 6"-12" >Dummy/Monitor/Prime/Spacer Test Wafer 6" - 12" >Thin Wafer Thicknesss : 150um - 850um >Aluminium Wafer : 6" to 12" >Test Wafer / Oxide Wafer : 6" - 12" >Special Wafer (Nitride, SiC, LT, LN, SOI....etc) B) Types of Wafer Services > Various level (Dummy, Monitor Prime, Test, Spacer, Reclaim) >Chemical/Electroless Plating Services on Ti, Cu, AI Pad. Shipping Boxes Range: >FOSB,FOUP >Cassette: 2-12inch >MW type >Entegris type >Pizza Box
Silway 714 water repellent is a water-dilutable solution of potassium methyl siliconate designed to impart water repellency to a wide variety of surfaces. Supplied at a concentration of 42 percent in water. Silway 714 water repellent reacts with carbon dioxide in the air to form am insoluble water-resistant treatment within 24 hours. KEY FEATURES: * Reduce water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate. * Colorless and non-yellowing protection preserves the natural appearance of the substrate. * Penetrating and breathable * Low VOC * Nonflammable
Acetic GP Silicone removable Sealant fact cure sealant adhesive for indoor Supply Ability: 1000000 Piece/Pieces per Month high quality windshield structural auto glass silicone sealant Packaging & Delivery Packaging Details For 260ml,24pcs/carton,carton size:295*195*24mm,2080ctns/20ft For 300ml,24pcs/carton,carton size:307*207*250mm,1850ctns/20ft For 590ml,20pcs/carton,carton size:360*250*200mm,1550ctns/20ft Port: Qingdao Port Lead Time : 5-15 days, depends on order details, payment time Colors: Clear, Black, White, Grey, Brown, Bronze , requested by customer 2019 New Arrival Free Samples Mirror Glass Window Car Windshield Rubber adhesive for corian Performance Standard Measured Value Testing Method Test at 50±5% RH and temperature 23±20C: Density (g/cm3) ±0.1 0.97 GB/T 13477 Tack-Free Time (min) 180 12 GB/T 13477 Tack-Free Time (min) 80 1000 GB/T 13477 Tensile Modulus (Mpa) /23 0.4 0.18 GB/T 13477 Slumpability (mm) vertical not change shape not change shape GB/T 13477 Slumpability (mm) horizontal 30 GB/T 13477 Curing Speed (mm/d) 23 As Cured -After 21 days at 50±5% RH and temperature 23±20C: Hardness (Shore A) 20~60 34 GB/T 531 Tensile Strength under Standard Conditions (Mpa) / 0.4 GB/T 13477 Elongation of Rupture (%) / 88 GB/T 13477 Movement Capability (%) 20 20 GB/T 13477 Storage 12 Months Characteristic 1.Single-component compound , de-oxime neutral curing, medium/highly modulus. 2.High tensile strength, good expanding performance, excellent bonding strength. 3.Excellent unprimed adhesion to most common building substrates. 4.After curing form a cold and heat resistance. Non-corrosive. Flexible sealant body. 5.Waterproof, age resistance, ultraviolet and ozone resistance. 6.Good capability with other follow series silicone sealing.With years of export experience along with excellent quality, Main Function 1.Structural glazing and sealing for glass curtain wall. Stone curtain wall (marble granite ) aluminum curtain wall and metal structure engineering. 2.Lighting ceiling sealing, the second sealing for insulation glass, stagger and opposite adhesion between glass and glass. 3.Semi-hidden framed and hidden frame engineering curtain wall sealing. 4.Other architectural and industrial sealing.
Acrylic sealants are based on acrylic polymers and are recognised by several other names including decorators caulk, painters caulk or decorators acrylic. They are traditionally used as an economical filler and sealant mainly internally however some can be used externally.
General Purpose Silicone Sealant is an anti-bacterial; single component Acetoxy range sealant, which is cured by atmospheric moisture to form a high strength waterproof seal. It is multi-purpose silicone sealant which is flexible and has a powerful anti-fungicide property to prevent mould/bacteria growth.
Weather Sealant is a high-performance, neutral cure weather resistance silicone sealant. It has non-corrosive property, 50% Joint movement capability and low Tensile strength. It provides strong bonds to a variety of construction materials. Low string upon gunning, ease of application and ready to use.
Kazma KZWS-789 weatherproof neutral silicone sealant is a one-part, neutral and moisture cure, medium modulus silicone sealant that provides durable, pliable, watertight joints and offers outstanding adhesion without priming to most non-porous substrates. With its unique weather-resistant formula, it possesses a balanced adhesive strength and very high recovery, making it ideal to withstand adverse weather conditions in common installations including moisture, movement, sheer, and de-flection, heat and cold resistant, aging resistant, UV resistant . It is easily runnable in all weather conditions from -20 to 120 degrees F. Because our weatherproofing silicone caulking requires no mixing and a smaller joint ratio, it is an economical, high-performance alternative to other comparable sealants with a �±40 percent movement capability. Excellent Weather Proof Ability Not changing in hot weather or cold weather conditions 300% Tensile strength Strong tensile and flexible No cracking Excellent toughness Excellent tightness No shrinkage Colors - Clear, White, Black & any other color as per requirement. Supply Ability: 2000 Carton/Cartons per Day
Kazma KZGP-1000 Acetic cure Silicone Sealant is a high performance sealant suitable for sealing, bonding, repairing and mending of glass and window construction, double glazing in windows, aquariums, shower screens and sanitary ceramics. SINOLINK GP Acetic cure Silicone Sealant exhibits an excellent adhesion to glass tiles ceramics, fibreglass, aluminum, no-oily woods, painted surfaces, plastics and other non-porous surfaces. Excellent Weather Proof Ability Not changing in hot weather or cold weather conditions 300% Tensile strength Strong tensile and flexible No cracking Excellent toughness Excellent tightness No shrinkage Colors - Clear, White, Black & any other color as per requirement. Supply Ability: 2000 Carton/Cartons per Day
Kazma KZGP-1000 Acetic cure Silicone Sealant is a high performance sealant suitable for sealing, bonding, repairing and mending of glass and window construction, double glazing in windows, aquariums, shower screens and sanitary ceramics. SINOLINK GP Acetic cure Silicone Sealant exhibits an excellent adhesion to glass tiles ceramics, fibreglass, aluminum, no-oily woods, painted surfaces, plastics and other non-porous surfaces. Excellent Weather Proof Ability Not changing in hot weather or cold weather conditions 300% Tensile strength Strong tensile and flexible No cracking Excellent toughness Excellent tightness No shrinkage Colors - Clear, White, Black & any other color as per requirement. Supply Ability: 2000 Carton/Cartons per Day
Acetic Silicone Sealant is a 100% silicone sealant,It has been specifically formulated for the fabrication of fresh and salt-water aquariums. This high modulus component Silicone Sealant forms strong cohesive bonds to glass without the need of primers.The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
