Induction hardened hard chrome plated rods with Ck45 quality, excellent surface roughness, optimum corrosion resistance and high impact resistance for hydraulic-pneumatic cylinders and other applications.
Technical Specifications
Steel Grade:C45E (EN 10083)
Diameter Range:12 to 120 mm
Tolerance Class:ISO f7
Roundness:Diameter tolerance / 2
Standard Lengths:For 60 mm: 5600 - 6200 mm,For 60 mm: 5800 - 6200 mm
Upon request: special lengths on all diameters
Surface Roughness:Ra max. 0.2 m
Surface Hardness:min 55 HRC
Hardened Layer Depth:2.0 mm
Chrome Layer Thickness: 20 mm: min. 15 m, 20 mm: min. 20 m
English name: Vanadium Nitrogen Alloy
Molecular formula: VN12VN14 VN16
CAS NO.: 24646-85-3
Boiling point:2360
Shape: small lump
Grade Standard: Industrial Grade
Application:
Vanadium nitrogen alloy can be used in structural steel, tool steel, pipe steel, steel bar and cast iron. The application of V-N alloy in high strength low alloy steel can effectively carry out v and N microalloying at the same time, promote the precipitation of carbon, V and N compounds in the steel, and play a more effective role in precipitation strengthening and grain refinement.
The addition of VN to steel can improve the comprehensive mechanical properties of steel, such as strength, toughness, ductility and thermal fatigue resistance, and make the steel have good weldability.
The yield of vanadium and nitrogen is stable and the fluctuation of steel properties is reduced. It is easy to use and less loss. High strength moisture-proof packaging, can be directly into the furnace.
Packing: Big Bag
English name: Vanadium Pentoxide (Flake)
Molecular formula: V2O5
CAS NO.:1314-62-1
Density:3.357g/cm3
Melting point:690 Boiling point:1750
Aqueous solubility:1g/125mL
Appearance : gray black flake
Application: Vanadium flakes are mainly used in the iron and steel industry. By refining the structure and grains of steel, the grain coarsening temperature is increased, thereby increasing the strength, toughness and wear resistance of the steel. In addition, vanadium flakes are excellent in titanium alloy Improved effect, used as an additive in the aerospace field.
English name: Ferro Vanadium
Molecular formula: FeV80
CAS NO.: 12604-58-9
Boiling point:3337
Melting Point:1887
Shape: small lump
Purity:FeV50-A/B/C, FeV80-A/B/C
Grade Standard: Industrial Grade
Application:
Ferrous vanadium is a ferroalloy composed of vanadium and iron, which is mainly used as an alloy additive in steelmaking.
The vanadium in ferrovanadium can improve the strength, toughness, ductility and heat resistance of steel, and improve the cutting performance of steel.
High vanadium ferro-vanadium is also used as an additive in nonferrous alloys.
Packing: 250KG/DRUM or Big Bag
116680 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.
We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include:
low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for
sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc.
Advantages of Ferrite Magnet:
Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Neodymium magnets (also known as NdFeB, Neo or NIB magnets), are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications.NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging.
Advantages of Sintered NdFeB Magnet :
1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temper ature;
2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet;
3. High cost performance.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance.
â?¢ Advantages of SmCo Magnet:
1.Superior resistance to high temperature.
2. Excellent resistance to corrosion, no coating is needed for surface protecting.
3.High working temperature.
4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances.
â?¢ Advantages of AlNiCo Magnet:
1.Customized designs are available.
2.Max working temperature can be as high as 550�°C.
3.Disadvantage: Br and BH(max)are not as high as rare earth magnet.
4.High energies and relatively low coercivity.
5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Flexible magnets are low-cost extruded permanent magnets made by bonding a strontium magnetic powder ina flexible vinyl binder. Microcrystalline magnetic powder of flexible magnet leads to its high magneticperformance, and artificial rubber makes it very flexible. Its maximum magnetic energy product has reached 90KJ/ m3 (11.25MGOe), industrial mass production magnetic performance range of 16 to 68KJ/m3(2.0~8.5MGOe).Due to its excellent flexibility, it can assemble faster than molded magnets. Flexible magnetic sheets, magnetic strips and labeling magnets are easy to use and manipulate to your desired specifications.
Advantages of Flexible Magnet:
Flexible magnets are easy to use, easy to manipulate, low cost and extremely versatile. They can easily be cut, bent,twisted, slit, or coiled and adhere to multiple items and surfaces. In addition, flexible magnetic materials require no surface treatments so no special precautions need to be taken to protect the magnetic surface. Our simple sheet on Care Tips will ensure that the use of magnetic sheeting on vehicles will not mar paint finishes.
Technical Data of Flexible Magnet:
Shapes: Rolls or Sheeting & Strips
Magnetization: Axially Magnetized
Br: 1,600 Gauss
BHmax:0.60 MGOe
Hc: 1,370 Oersted's
Max Operating Temperature:212F/100
Density(lb/in3): 0.133
mporter & Supplier of Nickel Sludge. Our product range also comprises of Copper Ore, Tin Ore, TIn Sludge, Cobalt etc. The raw materials are available in powder form, to the exact chemical and physical (Mesh Size) specifications of the welding electrodes industry.
Nickel Sludge
Product Code : Nickel
Nickel Percentage : 15% to 20%
Payment Terms : T/T (Bank Transfer), Western Union, Other
Minimum Order Quantity : 25 Metric Ton
Production Capacity : 100mt
Delivery Time : immidiate
Packaging Details : as per costumer requirement
