Metal scrap.
Technical speciffications can be provided directly to the buyer
Material: Electrolytic manganese metal flakes Spec: Mn 99.7% min C 0.04% max S 0.05% max P 0.005% max Fe+Se+Si 0.205% max Size: in flakes Pack: 1000kgs net in a big bag Inspect: certificate of CIQ
Casting magnesium anodes Mg 99.9% High potential Low potential.
Appearance: grey dark metallic powder Common uses: as an alloy addition is superalloys; production of sheet foil, strip or wire for various industrial application Re content: 99.99%min. Total metallic impurities: 100ppm m. Vacuumized plastic bag inside, net each 1.0kg; steel drum outside, net each 20-30kg.
Metal wire
Atomised Aluminum Powder for Alloy Industry. 50 Kg Bags.
Perforated metal mesh
We have filter expanded mesh, industrial expanded metal, decorating metal mesh, mini-opening expanded mesh, security fence expan.
Wall corner mesh material: high-strength material and well anti-rust treatment as a fragile part, the corners of walls can be reinforced by mesh with help of cement or mortar, preventing the cracking of mortar.
Chemical composition used rails: C:0, 54-0, 82 Si.:0, 18-0, 40 Mn:0, 60-1, 05 S:0.04 max P.:0, 035 max As.:0, 01 max of mass share Norms: r-50 gost-7173-75 and r-65 gost-8165-75.
anti solder dross inhibitor, Recyle dross up to 90% 800g/bottle
HMS 1&2 200-206 (Mix of 80% HMS1 and 20% HMS2) The scrap consists out of a mix of mill scrap (stampings, cuttings, bars, etc.), Industrial scrap (nuts, bolts, misc. pieces, etc), auto and truck frames and bodies, railroad scrap (wheels, axles, parts of locomotives and carriages, etc.), ship scrap (fittings, plate pieces, parts), construction scrap (plate, bars, angle pieces, rods, steel pipe, etc.) and miscellaneous commercial scrap (appliance casings, frames and parts, etc.). Non-Metal impurities total of 1% (one percent), or less. HMS 1 - ISRI Code 200: Heavy melting steel. Wrought iron and/or steel scrap 1/4 inch or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. HMS 1 - ISRI Code 201: Heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap 1/4 inch over in thickness individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. HMS 1 - ISRI Code 202: Heavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap 1/4 inch and over in thickness individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. HMS 2 - ISRI Code 203: Heavy melting steel. Wrought iron or steel scrap, black and galvanized. 1/8 inch and over in thickness, charging box size to include material not suitable as No.1 heavy melting steel. Prepared in a manner to ensure compact charging. HMS 2 - ISRI Code 204: Same as ISRI 203 but max size 36x18 inches. HMS 2 - ISRI Code 205: Same as ISRI 204 but free of sheet iron or thin-gauged material. HMS 2 - ISRI Code 206: Same as ISRI 204, but max size 60 x 18 inches. The scrap should be free from heavy oxidation, grease, mud, dirt, cast iron, tin, sand, and lead coated materials. The scrap should be free from non-ferrous materials, excessive rust and corrosions. Bulk
We have the capacity produing silicon powder 100, 000 tons per year, which is the largest manufacturer in china. Si>=99% , 20-200mesh; 200mesh ;325mesh; 600mesh ;20-800micro Can be applied 1.Organosilicon 2. Trichlorosilane 3. Refractory material like refractory bricks 4.Silica sol 5.Alumium alloy 1 ton a bag
Used scrap Any sizes
Specification; Used Rails as GOST R50-R65.
We supply material as per requirment of purity and mesh size 40 kgs/bag
Hms - spain origin scraps are required in bulk.
SMB-F200 automactic Hydraulic Metal baler is suitable for the steel works and the recovery and precess industries, colored and black metal smelt industries. It can ectrude every kinds of metal leftover materials, steel paring, waste copper and waste aluminum into qualified charging such as square column. Technical Specifications: 1) Nominal push force (2000kn) 2) Main cylinder pressure: 1000kn 3) Aux. Cylinder pressure: 2000kn 4) Dimension of compressed room (L*W*H) (mm): 770*900*450 5) Package block dimension (L*W)(mm): ª¦135*400-500) 6) Packgeg block density (kg/m³ ): >2000 7) Production efficiency (kg/h): 600-1000 8) Single cycle time(s): >100 9) Matched> capacity (kW): 18.5 10) Bag coming out / operational method Manual operation.
We sell HMS1&2 scrap iron. Origin is Europe, Russia, Switzerland, America, Ukraine. Our price is based on 30000 mt/month and min. 1 year long contract. Interested buyer must issue loi and bcl. After that we will send fco. Bulk
