Available in 0.5 ml and 1 ml All International Certifications available.
50 -5-500ml All International Certifications available
General Characteristics Single-use Sterile Including a mechanism to prevent reuse The syringe and needle shall be passively and automatically rendered unusable by the delivery of the intended fixed dose. And/ Or The auto-disable feature is automatically activated and remains effective from the time that the injection is commenced. And / Or The auto-disable feature is automatically activated on completion of the delivery of the intended fixed dose. Type and application Non-pre-filled, disposable. To administer DTP, DT, tetanus toxoid and diluted freeze dried measles etc for intramuscular and sub-cutaneous injection. Syringes with permanently attached needle Material Polypropylene with or without stainless steel Syringe size with pre-set volume and single marking 0.5ml for immunization (+20% to allow for removal of air) Graduation and accuracy Two markings only: 0 and 0.5ml. The difference between the maximum graduated volume and the expelled volume of distilled water shall not be greater than �± 25 micro-liters. Needle for Immunization · Diameter : 23G Length : 25mm (1) Stainless steel needle tubing for the manufacture of medical devices Needle shall confirm to IS 10654 of 2002 (third revision) equivalent ISO 7864 of 1993 Needle fixing Fixed capped, needle (23 G X 25 mm). Fixed needles should withstand an axial pulling force of 34N without separating from the syringe. If accidental needle stick protection devices are included in the design of the syringes or needle, they should not compromise the ease of use or the performance of the syringe. Leakage : Leakage of distilled water at a pressure of 0.3 mPa (3 atmospheres) for six minutes shall not be greater that 50 micro-liters. Dead space The maximum dead-space shall be 50 micro-liters. Self destruction The syringe shall be automatically rendered unusable when it has delivered a 0.5 ml dose of vaccine or distilled water. Filling The syringe is filled by inserting the needle through the septum of a sealed vaccine vial.
Name of the product Teremo 3-part tuberculin syringe with mounted needle, sterile, for single use (Ref: 3TS-1ML) Teremo 3-part insulin syringe with integrated needle, sterile, for single use (Ref: 3IS-1ML) Product characteristics Needle Hub and protector : Medical class polypropylene Cannula : Stainless steel Size : 29Gx1/2 (0.33 x 13 mm) Syringes are not resistant to UV radiation. Needles are coated with silicone to have good sharpness and for protection of the needle. Syringes Material barrier: : Polypropylene (PP) Plunger : Polypropylene (PP) Piston : Isoprene (Latex-Free) Sizes : 1 ml Graduation 3TS-1ML : 0.02 ml Graduation 3IS-1ML : 0.025 ml Tooling parameters for raw materials Limit for extractable metals : Total £ 5 Âg/ml, Cd 0.1 Âg/ml Limits for acidity or alkalinity : pH £ 1 pH Oxidized material : KMnO4 consumption 0.5 ml Method of sterilization : EtO gas Non-toxic, non-pyrogenic This product is intended to be used for hypodermic injection and fluid drawing. If the single package is opened before use, discard it immediately and do not use it. Take care not to contaminate the product during unpacking. The product is limited for single use and after use it must be discarded immediately. The product remains sterile for a period of 5 years after sterilization, provided that it is kept under specified storage conditions. Do not use after expiry date Product is phthalates and latex-free. Packing Per piece in sterile blister packing, 100 pieces in an inner box, 32 inner boxes in an export carton
Product Name: Medical Syringes Specifications: 1) 100 Million Sterile, 1ml Syringes with needles made up of the following Gauge : 50 Million 25G with 1 needles 25 Million 23G with 1 needles 25 Million 23G with 1.5 needles 2) 100 Million Sterile, 3ml Syringes with needles made up of the following Gauge : 50 Million 25G with 1 needles 25 Million 23G with 1 needles 25 Million 23G with 1.5 needles 3) 30 Million Sterile, 5ml Syringes with needles made up of the following Gauge : 15 Million 25G with 1 needles 7.5 Million 23G with 1 needles 7.5 Million 23G with 1.5 needles Quantity Available : 300 Million pcs. Shipping Terms : FOB Payment Terms : 100% L/C Looking for Buyers From : Worldwide
Product Name: Sterile Insulin Syringes Certificates: CE (Already Shipping to European Countries) Specifications: 1ml Syringes: 30 Million Syringes with 25G needles (1" length), Location : India 30 Million Syringes with 23G needles (1" length), Location : India Quantity Available : 60 Million pcs. Shipping Terms : FOB Payment Terms : 100% L/C, Irrevocable, Divisible, and Non-Transferable Looking for Buyers From : Worldwide
Syringe 0.3 ML / 0.5 ML Product have scale Mark for respective volume of vaccine to be injected (0.3 ML or 0.5 ML) Auto Lock (Protection from repeated use) Protective Cap for Needle ISO 7886 Compliant Compliant US FDA standards
Syringe: A medical device that is used to inject fluid into, or withdraw fluid from, the body. A medical syringe consists of a needle attached to a hollow cylinder that is fitted with a sliding plunger. The downward movement of the plunger injects fluid; upward movement withdraws fluid. Categories - Surgical Products
Syringes without Needle â?? How to Choose the Right Syringe Selection Guide. Syringes are essentially a small, manual pump device used for medical procedures. Syringes are used for injections, fluid removal or irrigation. Categories - Surgical Products
Insulin syringes * Choose insulin syringes designed for comfortable injections, in line with the latest recommendations on insulin delivery Just as effective as insulin syringes with longer needles, our 6-mm insulin syringes, like the BD insulin syringe with the BD Ultra-Fine 6mm needle, reduce anxiousness, and they are less likely to cause painful injections into the muscle.1,2 Utilizing thin wall technology, they feature a thinner wall that reduces the required plunger force and that helps large insulin doses flow easily.
Syringes are essentially a small, manual pump device used for medical procedures. Syringes are used for injections, fluid removal or irrigation. Choosing the Right Syringe can often be difficult. For injections, syringes are often fitted with a needle. For fluid removal, syringes may be fitted with a needle or with medical tubing. Irrigation syringes have a special tip and are commonly used by themselves or with tubing.
Disposable Syringes and Needles manufactured by the largest producer of syringes in South Korea, the same manufacturer that produces syringes for the well-known brand (e.g., BD). Each syringe comes already sterilized and assembled with the needle, the perfect setting to simplify injection procedures for healthcare workers. These syringes met the highest quality standards and are an ideal instrument for the inoculation of COVID-19 vaccines. We have a long-term production contract with the Korean manufacturer for a total of 40 million pieces per year. We import on a weekly basis in the US around 1 Million pieces of different sizes (1ml / 3ml / 5ml). We have ready stock (around 5 million pieces) in the US in our Los Angeles warehouse for immediate purchase (prices for ready stock in the US, start from $0.11 depending on the amount) Below the technical description of the product: * Luer Slip / Luer Lock * Syringes volume: 1ml / 3ml / 5ml (other size available) * Needle Gauge: 23G or 25G * Needle length: 1 inch or 1.5 inch * Graduation 0.1/0.01ml * Sterile * Already assembled * South Korean Production
Unibody Low Dead Space Syringe is the cutting-edge South Korean technological advance to improve vaccine distribution efficiency. Manufactured by the largest producer of syringes in South Korea, these syringes follow the next generation of Low Dead Space (LDS) design, having only 4 micro-liter of residual (10 times less than usual LDS). Thanks to the Unibody design with fixed security needle, each syringe enables to extract up to 20% more vaccine volume per vial, translating in up to 20% more doses and up to 17% of cost-saving per vaccine dose. Technical description of the product: * UNIBODY design with fixed security needle * Syringes volume: 1ml * Needle Gauge: 23G * Needle length: 1 * Graduation 0.1/0.01ml * Sterile * Already assembled
Low Dead Space Syringe is the cutting-edge of South Korean technological advance to improve vaccine distribution efficiency. These syringes follow the next generation of Low Dead Space (LDS) design having only 4 micro-liter of residual (10 times less than usual LDS). Thanks to the Unibody design with fixed security needle, each syringe enables to extract up to 20% more vaccine volume per vial, translating in up to 20% more doses and up to 17% of cost-saving per vaccine dose. We have ready stock in the US (around 1 million pieces) in our Los Angeles warehouse for immediate purchase (prices for ready stock in the US, start from $0.18 depending on the amount).
Our medical syringes are all made of high quality, sterile, nontoxic, and pyrogen free materials. We provide auto disable (AD) syringes as well regular single use syringes. AD syringes prevent re-use and thus the transmission of diseases. Its integrated needle is an important feature of the non-dead-space design, which reduces waste of medication to a minimum. AD syringes are equipped with the Terumo lancet point needle which guarantees unsurpassed needle quality and minimal patient trauma. Its usage is the same as common syringe but with easy and smooth drug injection. Specification: * 1mL, 2mL, 3mL, 5mL, 10mL, 20mL, 30mL, 50mL with or without needles * Luer slip or luer lock * CE/ISO/FDA approved * Sterile, nontoxic, pyrogen free * For single use * High quality, reasonable price Features: * Quality certificates: CE0197/WHO/FDA/ISO9001/ISO13485 * OEM/ODM, clients' design is welcome * Sterilized by EO gas, sterile, nontoxic, pyrogen free, single use only * Easy readings with accurate and clear scale markings * 5-year shelf lifespan * Barrel and plunger: high transparent medical grade PP, piston: latex free * Individually packing: PE bag (polybag) or blister packaging * Free sample available * Application: Vaccine injection(Covid-19, BCG, Hepatitis B and so on), AIDS injection
Device Name: Sterile Single-use Syringe with Needle Regulation Number: 21 CFR 880.5860 Regulation Name: Piston syringe Regulatory Class: Class 2 Product code: FMF, FMI Full FDA 510K/CE certification available
Luer Lock with/without safety needles. Min. scale graduation: 0.01ml Package(Unit): Blister Box: 100 pcs Case (units): 3600pcs Case Size: 58x39x58cm/51x39x55cm Gross weight: 21Kg/19.5Kg Sterilization: EO Expiration Date: 5 years Needle Size: 21G, 22G, 23G, 24G, 25G, 26G, 27G Needle Length: 1/2", 3/4", 1", 1 1/4", 1 1/2", (13, 16, 20, 25, 30, 38mm)
We are a agents for a European Syringe and cannula manufacturer. With US FDA and European CE, we offer the best price in the world market today. Additionally we can cater to your personal specs provided the numbers are substantial. We manufacture 1ml 2ml 3ml 5ml 10ml 20ml syringes with 18G 21G 23G 25G latex free needles. Luer lock and Luer slip.
Disposable syringe luer slip 1ml 25g x 1" STOCK AVAILABLE 12 MILLION UNITS EXPANDIBLE AT 80 MILLION UNITS SHIPPING FROM ITALY READY STOCK
Syringes
