Various membranes are available to meet your needs:
Polyethersulfone (PES) - low protein binding and faster flow rate.
Polytetrafluorethylene (PTFE) - chemical resistance.
Nylon (NY) - hydrophilic and lowest extractable.
Accurate labeling with specific filter material and pore size for easy identification.
Sterilized, manufactured in accordance with ISO standards.
Using this model of injection syringes is a very effective and fast method that can split the skin with minimal damage and facilitate the treatment process for both patients and doctors, and according to this issue, different models of this syringe are produced in the world. Has been.
Product Description
Diabetic pressure activated single use safety blood glucose lancet
Diabetic Pressure Activated Single Use Safety Blood Glucose Lancet
Safe
The patented design of protective cap can beconversely re-capped into lancet body after use,which avoids the possibility of cross infection
Needle is fully shielded before and after use
Needle is retractable
Self-destructing design
Painfree
Double springs inside lancet body
Silicone-coated needle tip
Tri-bevel needle tip
Comfortable
Ergonomic design for easy handling
Material: The main raw materials of the safety lancet of our company are steel needle sus 304, low density Polyethylene resin, ldpe, the high density polyethylene hdpe, abs and color plastic particle.
Puncture depth
Diabetic Pressure Activated Single Use Safety Blood Glucose Lancet
Diabetic Pressure Activated Single Use Safety Blood Glucose Lancet
About us:
Maide is professional disposable medical device manufacturer with 27 years' experiences. Maide's factory passed ISO9001, ISO13485, CE and FDA approval.
Our product list includes safety lancets,Adjustable safety lancets,Lancet Devices,Alcohol Pad,safety syringes,safety pen needles,safety needles,Insulin pen needles,insulin syringes,lancets,syringes,dental needles,intravenous needles,transfuion sets,dispensing needles,butterfly needles,beauty needles,blunt fill needles etc..
We are not only supply the products, we supply the service include design, material procurement, assembly, testing, packaging, sterilization facilitation, supply chain management and order fulfillment.
We are keeping good and long-term partnerships with domestic and international clients.
Diabetic Pressure Activated Single Use Safety Blood Glucose Lancet
Questions and Doubts:
1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the Lead time?
A: Sample needs 3-5 days, mass production time needs 30-45 days according to order quantity.
Q3. Is it OK to print my logo on packaging?
A: Yes. Please inform us formally before our production and confirm the design.
2080 Medical Syringes Suppliers
Short on time? Let Medical Syringes sellers contact you.
We have 40M 1m 25G OTG Exw Korean origin Korean With FDA 510K/CE US$9.5/100Sets/Box
If you interesting please sent LOI (Endbuyer company Only) for request before sold out
We also can provide COVID Home test Kits, mask and different PPE Product. If you need lower price, I also can got in China factory directly.
**Available in stock in Europe now low dead space 1 ml syringe without needle **
Disposable Medical 1ml 2ml 5ml 10ml 2 or 3 Parts plastic luer slip/lock syringe with needle Name: disposable syringe( Luer Slip) Material: PVC Packing: blister /PE Types: 3 Parts: Barrel+Piston+Plunger Sterilised by EO gas, non-toxic, non-pyrogenic, single use only. * CE, ISO 9001, ISO 13485
**Available stock for 2-5-10ml syringe without needle and 5ml with 21,22 and 26G needles**
Disposable Medical 1ml 2ml 5ml 10ml 2 or 3 Parts plastic luer slip/lock syringe with needle Name: disposable syringe(Luer Lock or Luer Slip) Material: PVC Packing: blister /PE Capacity: 1ml, 2ml, 2.5ml,3ml, 5ml, 10ml, 20ml, 30ml,50ml,60ml. Types: 3 Parts: Barrel+Piston+Plunger+Needle (or without needle) 2 Parts: Barrel+Plunger +Needle (or without needle) Sterilized by EO gas, non-toxic, non-pyrogenic, single use only. * CE, FDA, ISO 9001
Suitable for R & D / F & D purpose & small batch size production
Suitable for Nested Pre-fill Syringes & Nested Stopperes
Manual transfer of Tub from Filling to Stoppering Unit
21CFR Part 11 Compliance
Suitable for aqueous & viscous & visco - elastics drugs
Filling Accuracy @ (+/-) 0.02ml in 0.2ml Fill
Fill Volume Spectrum : 0.2ml to 10ml (Change Part Supported)
21CFR part 11 compliance
Suitable for aqueous & viscous drugs
Filling accuracy @ (+/-) 0.02ml in 0.2ml fill
Fill volume spectrum : 0.2 ml to 10 ml (Change Part Supported)
Tub - in & Tub - out movement
Synchronized LAF with Rabs/Isolator
Structure Properties of product:
A. It has self-destructive characteristics, when the expected dose of the drug is injected, the self-destructive performance will automatically take effect, effectively prevent the reuse of syringes, avoid cross-infection and improve the safety of clinical injection.
B. The self-destructive structure is various. There are two kinds of self-destructive structures: front-end structure and back-end structure. The self-destructive performance is high and reliable. Front-end type, suitable for small dose injection (1.0ml), low residue, and back-end type, suitable for large dose injection (2.0ml and more than 2.0ml)
C. Size: 1.0ml , 2.0 ml , 2.5 ml , 3.0 ml , 5.0 ml , 10.0 ml , available.
Safety Characteristics: after absorbing the expected dose of liquid medicine, if transporation is needed, push up the sliding-sleeve to protect the needle tip from physical damage during transportation,
pull the sliding sleeve the expose the needle tip beofre the injection starts,when the expected dose of liquid medicine is 100% injected ,manually side the sliding sleeve to the position where the connector
base can no longer side, the needle tip is completely covered in the sliding sleeve, and then the sliding sleeve is manually rotated until it is locked, it could effectively preventing repeated use and accidental
needle sticking, and avoiding cross infection. To prevent the spread of diseases such as hepatitis B and AIDS, reduces the risk of medical staff occupational exposure, improved the clinical injection safety.
Disposable Insulin Syringe
Structure properties of products
A The integrated design of the needle holder and barrel injection molding which ensures the low residue of the liquid and ensures the accuracy of the injection of liquid.
B Small tip configuration which could reduces the patients' pain.
C Firm adhesion of the ink of scale, friction resistance, not easy to fall off.
D Excellent sliding performance, convenient for clinical injection of medical staff.
E Good usability design: The barrel is transparent and can clearly observe the liquid and bubbles. The plunger has a non-slip structure and is easy to be hold , anti-slip structure of the inner chamber of the back end of the barrel,
which can prevent the plunger from accidentally slipping out of the barrel the color of the cap distinguishes insulin strength(U-100,U-40), so that it is easy to indentify and use.
Product Feature
1. Term Infusion Set
2. Type
1,With or without Air vented
2,With or without filter
3,Hard or soft drip chamber
4,Hypodermic needle or butterfly needle
5,With or without needle (with cap if without needle)
6,Luer slip or luer lock connector
7,Transparent tube, elastic non-transparent tube, DEHP-FREE tube
8,Latex injection bulb, Latex injection cylinder, Latex-free bulb, Y-site
9, 20drops=1ml or 60drops=1ml
3.Material Medical grade PVC material
4. Size 6ml, 8ml,12ml hard chamber
5. Packing 1pc/bag, 500bag/ctn
6.Carton Size 61*38*42.5cm
7.Application Widely used in hospital&healthcare,medical consumbles&parmacy,beauty salon, food processing,industrial protective,daily use,etc.
8. Individual pack PE PACKING
Product details
Syringe and needle is available
1. Two part Luer slip syringes available in 1ml 2ml 3ml 5ml 10ml 20 ml.
2. Three parth Luer slip syringes available in 1ml 2ml 3ml 5ml 10ml 20ml 30ml 50/60ml.
Product Ingredients/Materials: Non perogenic, non toxic, sterile
Pricing:
FOB in USD: $0.09
PRICING COMMENTS:
Delivered: Global - All regions
MOQ: 500K pcs
READY DATE: ASAP
Availability: Available Now
Country/Region of Origin: China
State of Origin: Zhejiang
Port: shanghai
Product dimensions/Blister Packaging:
1ml, 23Gx1" - 6.77 x 1.3 in
1ml, 23Gx1.5" - 7.3 x 1.3 in
1ml, 23Gx1" - 6.77 x 1.3 in
1ml, 23Gx1.5" - 7.3 x 1.3 in
3ml, 23Gx1.5" - 6.93 x 1.4 in
3ml, 23Gx1" - 6.93 x 1.4 in
3ml, 23Gx1.5" - 6.93 x 1.4 in
5ml, 23Gx1.5" - 6.93 x 1.54 in
INNER BOX PACKAGING
1ml, 23Gx1" - 7.48 x 6.69 x 2.95 in
1ml, 23Gx1.5" - 7.48 x 7.09 x 2.95 in
1ml, 25Gx1" - 7.48 x 6.69 x 2.95 in
1ml, 25Gx1.5" - 7.48 x 7.09 x 2.95 in
3ml, 23Gx1.5" - 7.09 x 6.10 x 5.71 in
3ml, 23Gx1" - 7.09 x 6.10 x 5.71 in
3ml, 25Gx1.5" - 7.09 x 6.10 x 5.71 in
5ml, 25Gx1" - 7.72 x 6.10 x 7.09 in
MASTER CARTON PACKAGING
1ml, 23Gx1" - 20.87 x 15.75 x 13in
1ml, 23Gx1.5" - 22.24 x 15.75 x 13in
1ml, 25Gx1" - 20.87 x 15.75 x 13in
1ml, 25Gx1.5" - 22.24 x 15.75 x 13in
3ml, 23Gx1.5" - 24.02 x 48.5 x 14.96in
3ml, 23Gx1" - 24.02 x 48.5 x 14.96in
3ml, 25Gx1.5" - 24.02 x 48.5 x 14.96in
5ml, 25Gx1" - 24.02 x 48.5 x 14.96in
