General Features of our Face Shields
Easy to clean and sterilise
Eco-friendly
Anti-fog
Large 43cm/17 protective surface
Why our Face Shields
More comfortable to wear than a face mask
Lightweight
Easy to assemble
Easy to Clean and Sterilise
Our Face shields were made with non-porous plastic which makes it easy to clean and sterilise. Being exceptionally durable as well, our shield can be used many times if properly handled and regularly disinfected.
Anti-fog
The elastic band that goes over your head is attached to another one which holds your shield in place. This leaves enough space between your head and the shield, preventing the hot air from becoming trapped between your face and the protective plastic. Unlike other face shields that usually use foam, our face shields were especially designed to be anti-fog by maximising breathability and visibility.
Eco-friendly
The plastic used to make our face shields is 100% recyclable. Vannin Healthcare was specifically focused on a combination of recyclability and breathability to protect you in more than one ways, both long- and short-term. A lightweight alternative to a face mask, our shields are easy to assemble and comfortable.
General Features
Size: 17.5 x 9.5cm
Colour: Blue and white
Materials: polypropylene, non-woven fabric
Packaging: 50 masks per box
Safety Features
CE certified
In accordance with the European standard EN14683:2005
BFE 98%
The middle polypropylene layer filters airborne particulate matter
Water-absorbent inner layer to alleviate the moisture build-up
Water-repellent outer layer to prevent inhalation of large liquid droplets
Non-splash resistant
Comfort Features
Breathing resistance & 29.4 Pa/cm2
The soft material makes the mask-wearing more comfortable
A non-irritating inner layer
Adjustable nose clip for a better fit
Elastic ear loops for a more secure mask adjustment
3 layers
Our 3-ply surgical face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier.
Bacteria filter efficiency (BFE)
Our Type II medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98 �¢?? 99.9% protected from inhaling airborne pollutants.
100% compliant with regulations (CE, EN14683:2005)
Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request!
High breathability
The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up.
Disposable
In order for your Type II mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
General Features
Size Universal
Colour White
Packaging 20 masks per box
Optional design Cupped or folded
Safety Features
CEcertified FDAcleared
In accordance with the US standard NIOSH42CFR84
Filtration efficacy of PM25 99
Filtration efficacy of PM03 95
Disposable
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic ear loops for a more secure maskadjustment
High fit effectiveness
Fits more tightly against the face cupped respirators
Conveniently portable folded respirators
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA NIOSH42C FR84
Our N95 respirators have been confirmed to meet all of the performance requirements set by the US standard NIOSH42C FR84 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your N95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Cupped Design
Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket If youre looking for a more portable alternative check out our folded mask design
Remember if your mask gets damaged its best to just throw it away
User Seal Check
Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to
Take the mask in one hand so that the nose clip is turned upwards
Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears
Adjust the mask carefully against your face not allowing for any gaps between the mask and your face
Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask
Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect it
59298 Medical Supplies Disposable Suppliers
Short on time? Let Medical Supplies Disposable sellers contact you.
General Features
Size Universal
Colour White
Packaging 20 masks per box
Fluid resistant
Optional design Cupped or folded
Safety Features
CEcertified FDAcleared
In accordance with the Chinese standard GB26262006
Filtration efficacy of PM25 99
Filtration efficacy of PM03 95
Disposable
Inward leakage lt8
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic ear loops for a more secure maskadjustment
High fit effectiveness
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA GB26262006
Our KN95 respirators have been confirmed to meet all of the performance requirements set by the Chinese standard GB26262006 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your KN95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Fluid Resistant
Our filtering face piece respirators are FDAcleared as being adequately fluid resistant Therefore they are recommended for use during surgical procedures or circumstances where one could come in contact with infectious splatters of bodily fluids
User Seal Check
Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to
Take the mask by its ear loops one in each hand with the nose clip up
Position the respirator under your chin
Place each ear loop behind its respective ear
Adjust the mask carefully against your face not allowing for any gaps between the mask and your face
Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask
Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask
General Features
Size: 17.5 x 9.5cm
Colour: Blue and white
Materials: polypropylene, non-woven fabric
Packaging: 50 masks per box
Safety Features
CE certified
in accordance with the European standard EN14683:2005
BFE 95%
The middle polypropylene layer filters airborne particulate matter
Water-absorbent inner layer to alleviate the moisture build-up
Water-repellent outer layer to prevent inhalation of large liquid droplets
Non-splash resistant
Comfort Features
Breathing resistance < 29.4 Pa/cm2
The soft material makes the mask-wearing more comfortable
A non-irritating inner layer
Adjustable nose clip for a better fit
Elastic ear loops for a more secure mask adjustment
3 layers
Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier.
Bacteria filter efficiency (BFE)
Our Type I medical masks effectively resist bacterial penetration with a rating of at least 95% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 95 â?? 99.9% protected from inhaling airborne pollutants.
100% compliant with regulations (CE, EN14683:2005)
Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request!
High breathability
The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up.
Disposable
In order for your Type I mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
Product Specification
Material - MELT BLOWN Disposable
Disposability - Disposable
Size - Free
Products in the Kit - 3 Ply Mask with Nose Pin and Disposable Bag
Certification - SITRA, CE, and FDA
Use Personal
Minimum Order Quantity 10000 Piece
Product Description
- 3 Ply Mask with Nose Pin
- Triple Layer Surgical Mask with Elastic Band
- Shape that will not collapse easily.
- High filtration efficiency.
- Good breathing.
- 3 Ply Surgical mask.
- With nose bridge for better fitting..
- Disposable Bag
- Disposable bag is well protected and made up of good quality. Everything which includes medical P.P.E Kit is well packed in it.
- Full precaution measures are been taken while packing it.
The King's KY 2222 Safety Goggles are a top-quality eye protection solution for various industrial applications. The goggles feature a lightweight design with a comfortable and adjustable strap, ensuring a secure fit during extended use. The lens is made of clear polycarbonate, providing clear vision and protecting the eyes from harmful UV and IR radiations. The goggles are also scratch-resistant and fog-resistant, ensuring clarity of vision in all conditions. The King's KY 2222 Safety Goggles meet international safety standards and are suitable for a wide range of applications including welding, grinding, and sanding.
The Honeywell V-MAXX Safety Goggles are protective eyewear designed for a wide range of applications. These goggles feature a durable polycarbonate lens that provides superior impact resistance and protects against flying debris and other hazards. The wide adjustable strap ensures a secure and comfortable fit while the indirect venting system helps prevent fogging and maintain clear vision. These goggles are also equipped with an anti-scratch coating that extends the life of the lens. Ideal for use in construction, manufacturing, and other hazardous work environments, the Honeywell V-MAXX Safety Goggles provide reliable protection for your eyes.
The Honeywell Maxx Pro Safety Goggles are high-performance protective eyewear designed for demanding work environments. These goggles feature a polycarbonate lens that provides impact resistance and protection from flying debris and other hazards. The wide adjustable strap ensures a secure and comfortable fit while the indirect venting system helps prevent fogging and maintain clear vision. These goggles are also equipped with an anti-scratch coating that extends the life of the lens. Ideal for use in construction, manufacturing, and other hazardous work environments, the Honeywell Maxx Pro Safety Goggles offer reliable protection and comfort on the job.
Our 9500 series of NIOSH approved respirators is the "standard" for all the industries in which these products are used. This is the basic N95 product developed to compete with similar appearing disposable respirators. By far, this cone style of N95 mask is the most widely used mask in all work environments.
It has been designed to easily meet NIOSH's stringent approval requirements for breathing resistance and filtration efficiency. Most companies interested in adding N95 respirators to their line of business will select either our 9500 series or the alternative MK series as the focal point around which to build a disposable respirator line.
SH9550 Series N95 Particulate Respirator
Polypropylene (P.P.) outer layer provides smooth lining and avoids loose fibers.
Embossed fringe seal avoids fluffy open layer around the edges.
Latex-Free synthetic rubber headstrap.
Contour design ensures the compatibility of glasses/goggles and reduces fogging.
Soft closed-cell nose foam and adjustable nosepiece ensure custom shape and increase the worker comfort and acceptance.
