- High Quality Coverall - Manufactured in South Korea *FDA Approved
Code 52110: For surgical wound drainage Features Nature rubber formation. Non-sterile. Smooth tubing wall, both outside & inside. X-ray opaque, ready to implant. Peel apart package. Length : 18(12 is also available) Diameter: 1/4, 3/8, 1/2, 5/8, 3/4, 1
Code 85750: Anchor wound dressings on fragile or at-risk skin Features Anchors wound dressings on fragile or at-risk skin. Secures tubing and devices. Gentle yet secure, waterproof and snug fit. Color: Flesh Tear type: Easy-tear or normal Size: 2.50 cm x 150 cm 5.00 cm x 150 cm
Code 85300: Made of polyethylene with acrylic coating. Features Made of polyethylene with acrylic coating. Hypoallergenic adhesive, leaves little or no residue. Porous and breathable. Perforated for easy tearing by hand. Thin, flexible and strong adhesive Material: Polyethylene Size: 1.25 cm x 9.14 M (1/2''x10yds) 2.50 cm x 9.14 M (1''x10yds) 5.00 cm x 9.14 M (2''x10yds) 7.50 cm x 9.14 M (3''x10yds)
Code 82700: Moisturizes, lightens the scar, hypoallergenic Features 1. Flesh color silicone sheeting with hypoallergenic adhesive. 2. Snug-fitting, washable and reusable for more than 15 times. 3. Pain-free and easy removal. Size: 1 cm x 10 cm x 1 sheet Material: PU, silicone gel
Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water Material: PU Shape: Round-cut or angle-cut Size: 4 x 4 cm (1.6''x1.6'') 6 x 7 cm (2.4''x2.8'') 10 x 12 cm (4''x4.8'')
Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water Material: PU Shape: Round-cut or angle-cut Size: 4 x 4 cm (1.6''x1.6'') 6 x 7 cm (2.4''x2.8'') 10 x 12 cm (4''x4.8'')
Code 89600: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water, Materialï¼? PU film Size: 6 x 7 cm (2.4''x2.8'') 10 x 13 cm (4''x5.1'')
Code 81100: Non-adherent absorbent pad Features 1. Porous non-adherent film on both side with absorbent pad in the middle . 2. Absorbent pad absorbs drainage away from wound. 3. Non-adherent film will prevent absorbent pad sticking to wound Color: White Size: 5 x 5 cm (2''x2'') 7.5 x 7.5 cm (3''x3'') 10 x 10 cm (4''x4'')
Code 82220: Non-woven adhesive dressing with absorbent pad Features 1. Non-woven fabric laminated with released paper. 2. Designed for thumbs,toes, finertips and finger joints where bandages do not hold well. 3. Individually wrapped and gamma sterilized. Color: White Size: 4.5 x 5 cm (1.8''x2'') 3.8 x 7.6 cm (1.5''x3'')
SpO2 cables are specifically designed to connect the SpO2 sensor, typically placed on a patient's finger or earlobe, to the monitoring device. These cables transmit the optical signals captured by the sensor to the monitor, where the data is processed and displayed as oxygen saturation levels.
Medical cable assembly for electrosurgical pencil
Medical grade PET, PETG blister, tray and HDPE cleancut card for medical device packaging.
Material Number: M0031681890 Description: Straight, 2-tip marker Total / Distal Length: 150cm/6.0cm The Excelsior SL-10 Microcatheter with Thin Wall Technology and Lubricious Hydrolene�® Outer Surface is designed to provide outstanding performance 1.7F (0.56mm) Low Profile Distal Shaft, Excelsior SL-10 Microcatheter is designed with a low profile tip to enhance access to distal vasculature and ease of passage of the catheter trip through stent interstices. Atraumatic Distal Tip, Specifically engineered for atraumatic access, the rounded, low-durometer, unbraided tip offers exceptional softness and flexibility. Variety of Tip Shapes, Offered in six clinically relevant shapes to improve access and navigability.
8410-0254 HyperSoft 3D Advanced, 2.5mm Large Loop Dia, 4cm INDICATIONS FOR USE: The MicroPlex�® Coil System (MCS) is intended for the endovascular embolization of intracranial aneurysms and other neurovascular abnormalities such as arteriovenous malformations and arteriovenous fistulae. The MCS is also intended for vascular occlusion of blood vessels within the neurovascular system to permanently obstruct blood flow to an aneurysm or other vascular malformation and for arterial and venous embolizations in the peripheral vasculature
Covidien EGIA60AMT - Endo GIA Reload -Articulating, Medium/Thick -Cartridge Color: Purple -Staple Size (Inner to Outer): 3mm, 3.5mm, 4mm
Wholesale Accu Chek Fastclix 204 Lancets Contact now for more details Serious inquiries only, please
The Hem-o-lok Ligating Clip System, produced by Teleflex under the Weck brand, is a medical device used in surgical procedures for the ligation (closing off) of vessels or tissue structures. The Hem-o-lok clips are commonly utilized in laparoscopic and robotic surgeries. Key features and aspects of the Teleflex Weck Hem-o-lok Ligating Clip System include: Material: The clips are typically made from a polymer material, providing a secure and reliable closure when applied to vessels or tissues. Design: Hem-o-lok clips are designed to be easy to use, with a simple mechanism for application. They are available in various sizes to accommodate different surgical needs. Application: Surgeons use Hem-o-lok clips to occlude or ligate blood vessels or other structures during surgery. These clips are widely used in minimally invasive procedures, such as laparoscopic and robotic surgeries. Secure Closure: The design of the clips aims to provide a secure closure, preventing bleeding or leakage from the ligated structures. Color Coding: The clips are often color-coded according to size for easy identification during surgery, allowing surgeons to choose the appropriate clip for the vessel or tissue being ligated.
Biosensors is a medical device company known for its innovations in interventional cardiology, particularly in the field of coronary stents. The BioMatrix platform includes a range of drug-eluting stents (DES) designed to be used in the treatment of coronary artery disease. Key features of the BioMatrix stent platform, which may extend to the NeoFlex model if it's a part of the series, may include: Drug-Eluting Stent: The stents in the BioMatrix platform are drug-eluting, meaning they are coated with a medication (such as an anti-restenotic drug) designed to inhibit the regrowth of tissue inside the treated blood vessel. Biodegradable Polymer: Some versions of the BioMatrix stent use a biodegradable polymer to deliver the drug to the target site. The polymer gradually dissolves over time, leaving only the metallic stent behind. Flexible Design: The stents are designed to be flexible, allowing for easier navigation and deployment in the coronary arteries. Thin-Strut Technology: Thin struts can contribute to improved deliverability and conformability of the stent to the vessel wall. Various Sizes: The BioMatrix stent platform typically offers stents in various sizes to accommodate different patient anatomies and lesion characteristics.
Penumbra is a medical device company known for developing and manufacturing products used in neurovascular and peripheral vascular interventions.
