In electric arc furnace steelmaking, oxygen or other gases are delivered to melt and refine steel in the electric arc furnace.
(2) Inject other powder additives to adjust steel grades or make special steel.
(3) Remove the slag in the oxygen converter.
(4) Other uses, such as strong heat resistance, oxidation resistance, sulfidation resistance and corrosion resistance.
steelmaking oxygen lance oxygen lance electric furnace steelmaking
1. Low consumption. The high temperature resistant coating forms strong heat resistance and oxidation resistance together, which can achieve the minimum consumption of oxygen blower and reduce the cost.
2. High quality: all production links from the selection of raw materials to the production of finished products are under strict quality control management.
3. Low price: The production line formed by the more advanced production equipment realizes the high quality and low price of the products.
Specification Editing Broadcast
Specifications and models of oxygen blowing pipes are: 5*1, 5*1.5, 6*1, 6*1.2, 6*1.5, 8*1, 8*1.2, 8*1.5, 9.52*1.24, 10*1, 10*1.2 , 10*1.5, 10*1.8, 10*2, 10.5*2.5, 12*1, 12*1.2, 12*1.5, 12*1.8, 12*2, 13*1, 13*1.2, 13*1.5, 13 *2, 14*1, 14*1.2, 14*1.5, 14*2, 16*1, 16*1.2, 16*1.3, 16*1.4, 16*1.5, 16*2, 17*2, 18*2 , 19*2, 20*2, 21*2, 22*2, 27*2, to 38*11, etc.
Oxygen blowing pipes are widely used in construction and industry. The cleaning and preheating of oxygen blowing pipes are as follows:
Before spraying (throwing) treatment, use cleaning method to remove grease and fouling on the surface of the oxygen blowing pipe, and use a heating furnace to preheat the pipe body to 40-60 �°C to keep the surface of the oxygen blowing pipe dry. In the spraying (throwing) treatment, since the surface of the oxygen blowing pipe does not contain grease and other dirt, the effect of rust removal can be enhanced. The surface of the oxygen blowing pipe after rust removal is cleaner.
-Select CECA top molecular sieve to stabilize oxygen production.
-With ultra-long cumulative timing function, the total working time can be seen at a glance.
With timing shutdown function, saving time and worry.
- The compressor has a thermal protection switch to ensure the safety of the whole machine.
1. Air oxygen blender
2. Humidifier with disposable chamber
3. Support arm
4. Adult disposable breathing circuit with a heated wire
5. Nasal cannula
6. Trolley
7. Medical air compressor
8. Tool kits
Package:
1 unit/ 2 cartons
1st cartonï¼?
90.0 x 43.5 x 30.0cm / 0.1175CBM
G.W.: 19.6kg
2nd carton
70.0 x 70.0 x 56.0cm / 0.2744CBM
G.W.: 55.0kg
Power Source
AC 220V, 50-60Hz (Optional: AC 110V, 50-60Hz)
Heated Plate
150W
Thermal Cut Off
95±6oC
Display
Three digit, 0.56 inch, 7 segment Led
Temperature Monitoring
0-75oC
Max-temperature of Heated Plate
85oC
Heated Wire
AC 22V 60W, 50-60Hz
Power Rate
220W
Alarm
Yes
Temperature Control Setting
Invasive Mode:Chamber outlet:
35.5-37oC, Airway: 35-40oC
Non-invasive Mode:Chamber outlet:
31oC, Airway: 28-34oC
Range
10-70oC, Accuracy: ±2oC (In 25-45oC temperature range)
Oxygen generator uses molecular sieve pressure swing adsorption principle, takes air as raw material, and absorbs nitrogen and other gas components to improve oxygen concentration to produce oxygen-enriched air. Oxygen concentration ranges from 90% to 96% (VA/), which can provide oxygen for therapy or relieve discomfort caused by hypoxia. When the equipment works, compressed air is injected into a closed adsorption tower filled with molecular sieve, which causes the pressure in the adsorption tower to rise. With the increase of environmental pressure, the molecular sieve absorbs a large amount of nitrogen in the compressed air, while oxygen in the compressed air still exists in the form of gas and is collected through a certain pipeline. This process is often referred to as the "adsorption" process. When the nitrogen adsorbed by the molecular sieve in the container reaches the critical state of adsorption saturation, the adsorption tower is blown to reduce pressure. With the decrease of environmental pressure, the ability of molecular sieve to adsorb nitrogen decreases, and nitrogen is released back to the gas phase from the molecular sieve and discharged as waste gas. This process is often called "desorption". In order to ensure the continuous and stable output of oxygen, the oxygen generator usually adopts two (or more) molecular sieve adsorption towers, which are controlled by rotating separation valves, so that one adsorption tower is in the adsorption process while the other adsorption tower is in the desorption process, and the two work alternately to complete the continuous oxygen production process.
10L oxygen concentrator
Model: QJ-ZY10La
CE certificate & China government medical approval
10L, dual outlet , Purity: 90%~93%, medical grade.
With humidification bottle
High quality molecular sieve, oil-free compressor with long lifespan
Timing as per user setting, automatically shut off
220V@50/60Hz, 700W
Home care oxygen concentrator:
Model: QJ-ZY02A
Fashion design
2L model (90~93%), up to 6L
Easy operation
Oil-free compressor with low running noise
CECA Molecular sieve
Humidifying Cup
220V@50Hz/60Hz
SOS help emergency call
The Zxdh series hydrogen generator produced by Zhongxinda has a capacity from 2 ~ 250m3 / h, which is controlled by a new type of programmable logic controller (PLC), providing users with an efficient, reliable and safe hydrogen production system.
The company's hydrogen generator is also equipped with a variety of control methods and auxiliary equipment for users to configure according to the best working conditions.
The hydrogen production capacity of a single electrolyzer of the water electrolysis hydrogen production equipment produced by Zhongxinda ranges from 2m3 / h to 1000m3 / h.
Designed for easy installation and safe, reliable, unattended operation, it provides on-site on-demand industrial gas generators to provide ultra pure H2 and O2.
MICiTECH 5L Oxygen Concentrator Model CP501
With PSA technology to make oxygen, 0.5L-5L/Min oxygen concentrator. Our oxygen concentrator is energy-saving and safe to use.
Specification
Model No.: CP501
Pressure: 40kpa-60kpa
Flow: 0.5L-5L/min
Purity: 93%�±3%
Weight: 14.5kg
Noise: ï¼?45dB(A)
Power consumption: 360VA
Dimension: 400mm*300mm*540mm
Voltage/Frequency: 220V/50Hz�±1Hz or 115V/60Hz
964 Medical Oxygen Kits Suppliers
Short on time? Let Medical Oxygen Kits sellers contact you.
