Medical Healthcare Suppliers and Manufacturers

Product: Powder free nitrile examination glove, single use, ambidextrous, non sterile, no leaking, suitable for both hands Utilization: Medical examination, against dirty with mild Latex: Does not contain natural latex and powder, decrease the risk of allergy Colour: Blue & Dark Blue

Colour: White Quality: 5 layer Packed: Individually

General Features of our Face Shields Easy to clean and sterilise Eco-friendly Anti-fog Large 43cm/17 protective surface Why our Face Shields More comfortable to wear than a face mask Lightweight Easy to assemble Easy to Clean and Sterilise Our Face shields were made with non-porous plastic which makes it easy to clean and sterilise. Being exceptionally durable as well, our shield can be used many times if properly handled and regularly disinfected. Anti-fog The elastic band that goes over your head is attached to another one which holds your shield in place. This leaves enough space between your head and the shield, preventing the hot air from becoming trapped between your face and the protective plastic. Unlike other face shields that usually use foam, our face shields were especially designed to be anti-fog by maximising breathability and visibility. Eco-friendly The plastic used to make our face shields is 100% recyclable. Vannin Healthcare was specifically focused on a combination of recyclability and breathability to protect you in more than one ways, both long- and short-term. A lightweight alternative to a face mask, our shields are easy to assemble and comfortable.

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified In accordance with the European standard EN14683:2005 BFE 98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance & 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply surgical face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98 �¢?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type II mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

General Features Available sizes XS S M L XL Available colours white blue Packaging According to your requirements Nonsterile disposable Powderfree as per the FDAs 81FR 91722 Safety Features Fully CEcertified and FDAcleared In compliance with EN 455 EN 374 ASTM D6319 Latexfree manufacturing Extremely durable and puncture resistant Provides protection from most chemical exposure Provides protection against viruses and bacteria Comfort Features Ambidextrous design Rolled rim makes it easier to put them on and off Custom design for your comfort Hypoallergenic High chemical bacterial and viral resistance Another unique benefit of Nitrile examination gloves is their durability against a greater number of chemicals compared to latex and vinyl gloves They are the best choice if youre handling oils and solvents and are therefore commonly used in the food industry Because of their high resistance they have become the most preferred option in laboratories and various medical settings with a high risk of contamination Latexfree manufacturing Our Nitrile examination gloves are not made with natural rubber latex This makes them ideal for people suffering from Type I allergies since they are not likely to cause an allergic reaction Please note that you should take the latexfree claim of other suppliers with a grain of salt There are currently no tests to determine whether any gloves are 100 latexfree as noted by the FDA 100 compliant with regulations CE EN 455 EN 374 ASTM D6319 Here at Vannin Healthcare we have successfully implemented the ISO 90012015 standard Our disposable Nitrile gloves are in compliance with the regulations specified by the Medical Device Directive 9342EEC making them fully CEcertified The FDA has formally cleared our Nitrile gloves as valid PPE Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Available sizes Sizes XS S M L XL Length 2355 mm 2355 mm 2355 mm 2355 mm 2355 mm Palm width 755 mm 855 mm 955 mm 1105 mm 1205 mm Thumb length 522 mm 542 mm 572 mm 592 mm 652 mm Forefinger length 662 mm 682 mm 722 mm 742 mm 802 mm Middle finger length 772 mm 792 mm 822 mm 852 mm 922 mm Ring finger length 682 mm 712 mm 752 mm 772 mm 822 mm Little finger length 522 mm 542 mm 562 mm 602 mm 642 mm Physical Specifications Palm Thickness Min 005 mm Finger Thickness Min 005 mm Wrist Thickness Min 005 mm Tensile Strength Before Aging Min 14MPaAverage 18MPa Tensile Strength After Aging Min 14MPaAverage 16MPa Elongation Rate Before Aging Min 500Average 580 Elongation rate After Aging Min 400Average 470

General Hospital Gown Features Type: low-level hospital gown Gown usability: disposable Material type: CPE Colour: blue Packaging: 1 per bag Why Our Gowns Low-linting Made from a breathable CPE material Easy to use and lightweight, allowing optimal freedom of movement Strong seams for improved durability CPE Comfortable Protective Gowns In Stock Our non-surgical AAMI level 1 protection gowns come with a variety of comfort features that will make sure you donâ??t feel encumbered by their presence. Perfectly sized for ease of use, these medical gowns cover all critical zones, providing enough protection in minimum-risk situations where there a low chance of liquids coming into contact with the wearer. When it comes to CPE material, chlorinated polyethylene is an effective blood repellent that is also lightweight, durable and breathable.Specifically created to allow freedom of movement, our gowns come with strong seams and elastic knitted cuffs. Use of Sterile Disposable Non-Surgical Drapes The main difference between surgical and� non-surgical gowns� lies in the fact that non-surgical ones like ours are lightweight and provide <4.5g spray impact penetration. They are intended for basic hospital and clinic care, protecting the wearer from other influences, and other patients from microorganisms of the wearer. This low-level type of protective wear isnâ??t just reserved for medical personnel â?? you can also use coveralls for industrial operations, larger business organizations, and even for domestic use. Important Safety Features for Medical Gowns At Vannin Healthcare Global, we are proud to say that weâ??ve manufactured extremely durable and resistant gowns that passed both the hydrostatic pressure and impact penetration test. While ensuring uncompromising protection in all circumstances that comply with the levels of liquid barrier performance issued by the Association of the Advancement of Medical Instrumentation (AAMI), we have obtained both relevant CE certification and full FDA clearance. Our non-surgical PE gowns are in compliance with ISO 9001:2015 and ISO 13485:2016. Please note that these gowns have an EN 13795 certificate which is equivalent to low level AAMI hospital gowns. Medical Gown Performance Standards â?? Overview Tear Resistance ASTM D5587(woven) ASTM D5587 (non-woven) ASTM  D1424 Tensile Strength ASTM D5034 ASTM D1682 / Seam Strength ASTM D751 Breathability (Water Vapour) ASTM F1868 Part B ASTM D6701 (non-woven) ASTM D737-75 Lint Generation ISO 9073 Part 10

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified in accordance with the European standard EN14683:2005 BFE 95% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance < 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type I medical masks effectively resist bacterial penetration with a rating of at least 95% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 95 â?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type I mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the US standard NIOSH42CFR84 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Fits more tightly against the face cupped respirators Conveniently portable folded respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA NIOSH42C FR84 Our N95 respirators have been confirmed to meet all of the performance requirements set by the US standard NIOSH42C FR84 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your N95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Cupped Design Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket If youre looking for a more portable alternative check out our folded mask design Remember if your mask gets damaged its best to just throw it away User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect it

General Features Size Universal Colour White Packaging 20 masks per box Fluid resistant Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the Chinese standard GB26262006 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA GB26262006 Our KN95 respirators have been confirmed to meet all of the performance requirements set by the Chinese standard GB26262006 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your KN95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Fluid Resistant Our filtering face piece respirators are FDAcleared as being adequately fluid resistant Therefore they are recommended for use during surgical procedures or circumstances where one could come in contact with infectious splatters of bodily fluids User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to Take the mask by its ear loops one in each hand with the nose clip up Position the respirator under your chin Place each ear loop behind its respective ear Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask

Product Specification Material - MELT BLOWN Disposable Disposability - Disposable Size - Free Products in the Kit - 3 Ply Mask with Nose Pin and Disposable Bag Certification - SITRA, CE, and FDA Use Personal Minimum Order Quantity 10000 Piece Product Description - 3 Ply Mask with Nose Pin - Triple Layer Surgical Mask with Elastic Band - Shape that will not collapse easily. - High filtration efficiency. - Good breathing. - 3 Ply Surgical mask. - With nose bridge for better fitting.. - Disposable Bag - Disposable bag is well protected and made up of good quality. Everything which includes medical P.P.E Kit is well packed in it. - Full precaution measures are been taken while packing it.

Personal Protective Equipment PPE Kit

N95 Respirator Face Mask

Safety Visor

Shoe Gloves

N95 Mask

Full Body Kit

Disposable Head Caps

Disposable Mask

Disposable Caps