Medical Healthcare Suppliers and Manufacturers

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified In accordance with the European standard EN14683:2005 BFE 98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of even smaller liquid droplets Splash-resistant ( 120 mmHg) Comfort Features Breathing resistance 49 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply Type II R face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants and penetration of bodily fluids. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II R medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98- 99.9% protected from inhaling airborne pollutants or hazardous splatter. 100% compliant with regulations (CE, EN14683:2005) Our 3-ply surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! Splash resistance The unique feature of Type II R surgical masks is the liquid-repellent layer offering additional protection against particulate matter and infectious splashes. The greater protective efficiency of the masks adequately makes up for the higher breathing resistance (49 Pa/cm2). Disposable In order for your Type II R mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified Fully certified Chinese standard (GB/T 32610-2016) BFE 90% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Comfort Features Higher breathability due to the lightweight material The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) With the standard BFE being met, our masks effectively resist bacterial penetration with a rating of at least 95%. You can go about your day, knowing you are practically perfectly protected from the air pollutants around you. 100% compliant with regulations (CE, GB/T 32610-2016) Our daily protective masks are 100% CE certified. They are also in accordance with the Chinese standard GB/T 32610-2016. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The soft lightweight material of the masks makes them perfect for everyday use. The breathing resistance is low, and the light and soft material of the inner layer was specifically designed to make your mask-wearing more comfortable. Disposable In order for masks to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the WHO guidelines for correctly putting the mask on and off.

General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Optional feature Valved or nonvalved Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 99 Disposable Inward leakage lt2 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants  It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Decide for yourself Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step Choose the design Cupped or Folded Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask I want the folded FFP3 respirator mask The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons Th

General Features Size Universal Colour White Packaging 20 masks per box Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 94 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Folded Design You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks Valved The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup  However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles nbsp Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto

Mask

Safety Needles EO Sterilization FOB Price

Safety Insulin Pen Needle EO Sterilization Packaging Config : TBD Features and Benefits: Sterile pack, single use only. Caina patented product. Color coded for easy identification of needle sizes. Ultra-sharp needle tip minimizes patient discomfort. Needle stick prevention, safety assured. Unique needle lubrication process, most comfort injection. Mini design for easy carrying. Red indication for activation. All materials are latex & DEHP free.

Ultra-sharp, tri-bevelled, anti-coring needle Stainless steel cannula Precision luer lock aluminum hub Coated With a Silicons Polymer Sterile Two pieces rigid pack Cartridges are color-coded to follow industry standards providing easy gauge Identification

Double-ended stainless steel needle with special anti-coring bevels; Smooth, rounded aluminum hub; Short butt end for evacuation; Sterile; Item No. Needles Gauge and Length: D*L ( G* inch) 20G*2 " D*L (mm * mm) 0.9*50 Colour Code: White BOX/Carton: 100/1000 OTHER SIZE ARE ALSO AVAILABLE

Ultra-sharp, tri-bevelled, anti-coring needle; Stainless steel cannula; Metal insert increases needle strength for animal health applications; Coated with a Silicons Polymer; Sterile; Two pieces rigid pack; Cartridges are color-coded to follow industry standards providing easy gauge Identification OTHER SIZE ARE ALSO AVAILABLE

Safety Huber Needle Features and Benefits Sterile pack, single use only. Needle-stick prevention, safety assured. Special needle tip design to prevent rubber fragment contamination. Luer connector, equipped with needleless connector, heparin cap, Y three-way. Chassis sponge design for a more comfortable application. High pressure resistant central line with 325 P.S.I Two holes connector optional. MDR 2017/745 USA FDA 510K Refer Standards ISO 10555-6:2015 Intravascular catheters - Sterile and single-use catheters Part 6: Subcutaneous implanted ports. ISO 8536-4: 2010 Infusion equipment medical use- Part 4: Infusion Sets for single use, gravity feed. ISO 23908:2011 Sharps injury protection Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood Samplings. ISO 7864:2016 Sterile Hypodemic Needles for Single-use requirements and test methods. ISO 9626:2016 Stainless Steel Needle Tubing for the Manufacture of Medical Devices requirements and Test methods. ISO 80369-7: 2016 Small - bore connectors for liquids and gases in healthcare applications. Part 7: Connectors for intravascular or hypodermic applications. ISO 10993-7:2008 Biological Evaluation of Medical Device - Part 7: Ethylene Oxide Sterilization Residuals.

Standard Needle EO STERILIZATION Single Blister Package MOQ 200K Specification : 18G---30G Sterile blister pack, single use only ultra-sharp needle tip minimizes patient discomfort color coded for easy identification of needle sizes compatible with standard syringes customized sizes available 510K CE ISO

Certified Disposable Medical Face Mask with Earloop / N95 Surgical Face Mask We have best quality 3ply with earlop NOVEKO , indoplas and Sensi mask now . price = EUR 0.05 per piece (50 piece per box) CIF = EUR 2.5 per box (40boxes/CTN ) CIF = EUR 100 per Carton CIF WE MAKE DELIVERY TO ANY COUNTRY 500 boxes (Min. Order) Production Capacity: 10, 000, 000 CARTONS / Month Payment Terms: T/T, BTC,PAYPAL,WESTERN UNION ,MONEYGRAM,WORLDREMIT Delivery time: ASAP , VIA AIR CARGO PLANE Transport Package : 50PCS/Box, 40boxes/CTN, 50PCS/Bag, 40bags/CTN Color : Blue,Green,White,Pink,Black, etc Payment : Percentage of upfront is negotiated depending on buyers quantity and contract duration The advance payment shall be used for the preparation shipment such as - Warehousing - Packaging - Inspection - Local Transportation = - VAT - Custom charges,SGS, and other government taxes Our products are of a very good quality and Our prices and very affordable.

Minimum order quantity 1 Million boxes

per annum. Price for volume over the MoQ 30 Million boxes is negotiable. Payment by L/C 100% at sight, transferable, irrevocable and confirmed. Product Name: Disposable Vinyl/Nitrile Blended Examination Gloves Single use, non-sterile, no measuring, Latex free Sizes: XS, M, L. XL. XXL Color: Blue, Green Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface: Smooth The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was developed based on the vinyl glove production technology. Its material is compounded with PVC paste and Nitrile latex, so the finished production has the advantage of both PVC and Nitrile gloves. Comparing with the vinyl gloves, the Vinyl/Nitrile Blended glove can better satisfy the users demands, it feels softer, more flexible and more comfortable when wearing. Intended purpose: The examination glove is disposable non-sterile device intended for medical purpose that is worn on the examinerâ??s hand or finger to prevent contamination between patient and examiner. Medical Device Quality Management System EN ISO 13485 Certificate, ISO 9001 Quality Management System Certificate - 2 FDA FDA Registration Information - 510K Product 510K Biocompatibility Test Report EU CE Certificate (DOC, Technical Documentation Review Report )