Key Specifications/Special Features - Certified N95 Protection : Its an N95 mask (when used with supplied filters) tested as per WHO-GMP, EN149:2001, U.S. FDA standards in an ISO Certified lab.High Efficiency: By close facial fit with a strong seal around the nose and the mouthHigh Comfort: With breathable fabric, flexi earloops and easy fit nose clipHigh Protection: Against harmful pathogens, airborne irritants, dust allegens Minimum Order Size and Packaging details - 10000 PCS
General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified In accordance with the European standard EN14683:2005 BFE 98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance & 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply surgical face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98 �¢?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type II mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified in accordance with the European standard EN14683:2005 BFE 95% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance < 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type I medical masks effectively resist bacterial penetration with a rating of at least 95% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 95 â?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type I mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the US standard NIOSH42CFR84 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Fits more tightly against the face cupped respirators Conveniently portable folded respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA NIOSH42C FR84 Our N95 respirators have been confirmed to meet all of the performance requirements set by the US standard NIOSH42C FR84 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your N95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Cupped Design Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket If youre looking for a more portable alternative check out our folded mask design Remember if your mask gets damaged its best to just throw it away User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect it
General Features Size Universal Colour White Packaging 20 masks per box Fluid resistant Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the Chinese standard GB26262006 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA GB26262006 Our KN95 respirators have been confirmed to meet all of the performance requirements set by the Chinese standard GB26262006 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your KN95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Fluid Resistant Our filtering face piece respirators are FDAcleared as being adequately fluid resistant Therefore they are recommended for use during surgical procedures or circumstances where one could come in contact with infectious splatters of bodily fluids User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to Take the mask by its ear loops one in each hand with the nose clip up Position the respirator under your chin Place each ear loop behind its respective ear Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask
Our 9500 series of NIOSH approved respirators is the "standard" for all the industries in which these products are used. This is the basic N95 product developed to compete with similar appearing disposable respirators. By far, this cone style of N95 mask is the most widely used mask in all work environments. It has been designed to easily meet NIOSH's stringent approval requirements for breathing resistance and filtration efficiency. Most companies interested in adding N95 respirators to their line of business will select either our 9500 series or the alternative MK series as the focal point around which to build a disposable respirator line.
SH9550 Series N95 Particulate Respirator Polypropylene (P.P.) outer layer provides smooth lining and avoids loose fibers. Embossed fringe seal avoids fluffy open layer around the edges. Latex-Free synthetic rubber headstrap. Contour design ensures the compatibility of glasses/goggles and reduces fogging. Soft closed-cell nose foam and adjustable nosepiece ensure custom shape and increase the worker comfort and acceptance. SH9550 N95 Particulate Respirator SH9550V N95 Valved Particulate Respirator SH9550C N95 OV Particulate Respirator SH9550CV N95 Valved OV Particulate Respirator SH9550A N95 OV/AG Particulate Respirator
These NIOSH approved Makrite Sekura Foldable N95 masks are designed to filter at least 95% of particulate matter. They are extremely durable with a soft and comfortable inner surface. These N95 masks come with an adjustable nose and secured head straps to provide proper fit. Brand: Makrite Model: Sekura-n95 NIOSH Approved Industrial Use Respirator FDA 510(k) Registered NIOSH Approval: TC-84A-7638 FDA 510(K) K020474
HSIBC deals in export of Taiwan 3-layer Face Mask for the COVID-19. Non-Medical mask supplies Product Name: Mask Product Certificate: CE , FDA510K , ISO, 9001/13485 certification. Suitable for daily cleaning, allergic people, service personnel(medical, dental, nursing, clinic and airplane services people etc.), as well as patients who need respiratory protection. Color: Pink , Blue and Black.
CIF 3Ply Mask -FDA L1 50/Box Color Blue, pink, white $1.5 including $0.2 commission $1.60 Inclusive $0.2 Commission for Black Time Fast Boat 10-18Days MOQ: 50M-5B SOP: 1. NCNDA, LOI 2 DRAFT SBLC/LC or TT 3 Seller offer life Video 3. IMFPA, Spa SBLC/LC or TT 4. CIF PORT, Buyer INSPECTION 5. Seller Release SGS &Buyer release FUND 6 Buyer Customs clearance Aug 24 2021y
Size:15.5*10.5cm Stock:Yes Shelf Life:2 years Safety standard:GB2626-2006 Instrument classification:Class II Material:PP, PP+Melt-blown Fabric+PP Applicable People:Adult Filter Rating:98% Quality Certification:CE Standard:EN14683 Type IIR Product name:IIR Nose Medical Facemask Type:Folding Particulate Protective Mask Certificate:CE/ISO/EN14683 Feature:BFE 98 % PFE 98% Properties:IIR Medical Respirator Packing:10pcs/bag Application:Safety Protection OEM & ODM:Customization Service Provided
Product Description : N95 face mask with Filters, Ear Loops Price of product ( USD price or FOB price) : Negotiable Product origin : Shenzhen, China Key Specifications/Special Features : High BFE, PFE, adjustable nose piece, Elastic earloop, CE certificated Minimum Order Size and Packaging details : 50000 pcs