Our company specializes in refurbishing bone density and ultrasound equipment. We handle all manufacturers, like ge, hologic, siemens, phillips and more.
Ultrasound scanner 7" b/w monitor Convex sector/linear scanning Full range of measurements and calculating functions for professional diagnosis Avariety of measurement, image processing, zoom display and depth scrolling Cdf&cda Multi-frequency probe technology featuring high density and broad frequency Two probe connectors with automatically probe switching Optional function of cine loop 585mm*405mm*309mm 12kg/14kg
Battery shaver This is the first type shaver in the world that no need battery, no need ac power, environmental protection completely! It is that the inertia of utilizing the pressure of hand to get the result of shaving. Size: 12*9*4cm Weidht:160g
Convenient and intelligent design Split-type design: separate design between host And probe to be convenient for finding the place of Fetal heart sounds Built-in trumpet: the built-in trumpet Can achieve many people listen the Fetal heart sounds at the same time. Power support: power with dry batteries aaa Advanced technology Angelsounds to remote central Monitoring system:it can transmit the Fetal heart signal to the remote Central monitoring system in hospital Through ordinary monitoring telephone To provide diagnosis for doctors, Enjoying the hospital experts' Diagnostic services at home. Angelsounds to pc:can transmit the Real-time sound of fetal heartbeat Sounds to the computer saving for Memory by specialized data lines Music player:it can broadcast music. Specification: Utrasound frequency : 3.3 mhz Acoustic intensity: < 10mw/square centimetre Peak negative pressure:
Convenient and intelligent design All to one design: such a design can make you taking it More easier . Built-in trumpet or earphone: you can listen the fetal Heart by built-in trumpet or earphone. The host embedded Rock can achieve many people listen the fetal heart sounds At the same time instead of using the external accessories Power support: power with dry batteries aaa Advanced technology Split-type design. Separate design between host and probe To be convenient for finding the place of fetal heart Sounds Angelsounds to remote central monitoring system. It can be Used singly and also transmit the fetal heart signal to the Remote central monitoring system in hospital through Ordinary monitoring telephone to provide diagnosis for Doctors, enjoying the hospital experts' diagnostic services At home. Angelsounds to pc . Can transmit the real-time sound of Fetal heartbeat sounds to the computer saving for memory by Specialized data lines Specification: Utrasound frequency : 3.3 mhz Acoustic intensity: < 10mw/square centimetre Peak negative pressure:
Lint remover It is very populor in the us and eu market Ce and rohs
Bed monitor Decides to the product
Patient monitor Newtech industrial corporation, a U.S. Medical company, manufacturing and marketing newtech medical equipments, including ecg, patient monitor, ultrasound scanner, anaesthesia machine and ventilator. Standard lot size
Ultrasound scanner 10" b/w crt monitor Convex sector/linear scanning Full range of measuring functions including ob table, lmp, cardio function, multi-parameter fetus weight measurement, etc Cda&cdf Svga technology Digital scanning technology including double echo, tgc, dsc and more Digital image processing functions including stc, frame correlation, etc 540mm*420mm*420mm 12/13kg
Ecg1501 Digital isolation technology minimizes the time and temperature drift of the components; Selectable rhythm lead makes it easy to observe arrhythmia ecg waveform; Visual alarm for ecg lead-off; Automatic measurement of ecg waveform assists the doctors with diagnosis; High resolution built-in thermal recorder prints out ecg waveforms , annotations and parameters for diagnosis reference. Fully charged battery supports continuous examination and print-out for 60 minutes or more , with normal operation for 2 hours. True one touch operation. 370mmx330mmx230mm , 2kg/5.3kg
Ecg1501 Digital isolation technology minimizes the time and temperature drift of the components; Selectable rhythm lead makes it easy to observe arrhythmia ecg waveform; Visual alarm for ecg lead-off; Automatic measurement of ecg waveform assists the doctors with diagnosis; High resolution built-in thermal recorder prints out ecg waveforms , annotations and parameters for diagnosis reference. Fully charged battery supports continuous examination and print-out for 60 minutes or more , with normal operation for 2 hours. True one touch operation. 370mmx330mmx230mm , 2kg/5.3kg
Aluminum wheelchair Aluminum frame Detachable armrest and footrest. Three-position rear wheels. Seat width: 46cm. Packaging: 1pc/ctn.
Tweezer material: stainless steel Light material: copper With 1pc led light, 1pc lipstick case with a small mirror Blister card
Neck traction fixer 1) Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2) The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3) The traction power can reach 80kg. 4) The net weight of the Necktraction Fixer is 250g. 5) Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6) The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C
Neck traction fixer 1)Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2)The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3)The traction power can reach 80kg. 4)The net weight of the Necktraction Fixer is 250g. 5)Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6)The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets.
Neck traction fixer The character of the neck traction fixer: 1)our product is the class i device, has got 3 exclusive patents (invention patent, new practical patent and shape patent) and is fda certified product. 2)the necktraction fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the necktraction fixer can adjust from 28cm to 48cm. 3)the traction power can reach 80kg. 4)the net weight of the necktraction fixer is 250g. 5)inner of the necktraction fixer is made from the rubber latex; the outside of the necktraction fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6)the person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets. The differences between DX-A and DX-C: The appearance of the DX-C is same the DX-A. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively Fengchi pointf¼Fengfu pointf¼Fengchi point, which can stimulate the circulation of blood. On the surface of DX-C is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) Practical and Effective: Not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) Convenient for carrying: a handy design for carry-on easy. C) Simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) Safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given. Beijing Daxiang New Material and Technology Co.
Neck traction fixer Introduction of the Neck Traction Fixer: The DX-series of Neck traction Fixer is a new type neck tractor as a product of health care. This Neck Traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, Air Neck Traction Fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the Neck Traction Fixer: 1) Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2) The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3) The traction power can reach 80kg. 4) The net weight of the Necktraction Fixer is 250g.
Dear Sir or Madam: I am a manufacturer of the Neck Traction Fixer in China, now I am looking for the distributor to distribute Air Neck Traction in foreign market. Neck traction Fixer is a new type health care product, which can elongates and exercises the neck, decreases the pressure, assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. Introduction of the Neck Traction Fixer: The DX-series of Neck traction Fixer is a new type neck tractor as a product of health care. This Neck Traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, Air Neck Traction Fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the Neck Traction Fixer: 1) Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2) The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3) The traction power can reach 80kg. 4) The net weight of the Necktraction Fixer is 250g. 5) Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6) The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets. The differences between DX-A and DX-C: The appearance of the DX-C is same the DX-A. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively Fengchi pointf¼Fengfu pointf¼Fengchi point, which can stimulate the circulation of blood. On the surface of DX-C is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) Practical and Effective: Not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) Convenient for carrying: a handy design for carry-on easy. C) Simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) Safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given.
Multi-channel interpretive electrocardiograph Ecg-32a: three channel intepretive ecg machine High resolution thermal array printer; 1/2/3/3+2 channel printout format 192x64 lcd to display setting menu Simultaneous acquisition of 12 lead ecg data Automatic measurement and interpretation of ecg waveform Rs232 interface and optional software supporting data transmission to pc Isolated input circuit with protection against defibrillation and pacemaking Ac power/(built in rechargeable li ion battery supporting 1 hour operation) Ac, emg, dft filter; paper size: 63mmx20m (roll type) Package for 1 unit:24x31x37cm gw:6kgs nw:5kgs Package for 4 units:60x40x53cm gw:26kgs nw:24kgs
Neck traction fixer The character of the neck traction fixer: Our product is the class i device, has got 3 exclusive patents (invention patent, new practical patent and shape patent) and is fda certified product. The necktraction fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the necktraction fixer can adjust from 28cm to 48cm. The traction power can reach 80kg. The net weight of the necktraction fixer is 250g. Inner of the necktraction fixer is made from the rubber latex; the outside of the necktraction fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms.
