Method of use: same as color masterbatch. Appearance: pellet/ white, grey white, grey Density(g/cbm): 1.5+/-0.1g/10 min Suggested ratio of dosage: Blowing molding: 1.0%-2.0% Sheet and injecting molding: 2%-5% Vacuum package, 5 kg per bag, and 5 bags per carton, totally 25 kg per carton
Filler masterbatch functions as a modifier to improve the heat resistance, tensile strength, size stability and printability. It also reduces heat release from burning and there force prevents further environmental pollution. Feature: Physical properties Index Typical value Carrier Pp/pe Caco3 content 80 Caco3 particle size 2.0 Melt temprature 150 Mi @2.16kg/230oc
Adding ratio: 5-50% (weight basis) MFI (g/10min) 3.5±1.0 Density (g/cm3) 1.65/1.70±0.05 Whiteness >90%, white granule, well plasticized pellet. Custom-making allowed. Transparent CaCO3 keeps optical property almost intact for translucent HDPE film. No powder/spot on plastic surface. Good dispersibility. Not block filter-sieve mesh. Optimize formula/process to achieve melt flowing dispersion, flexural tenacity and mechanical strength. 3. Packing and marking: – Masterbatch will be packed into PP/PE bag (25kg/bag) with label that following inquiry of customers. – Fullfilled bags will be put over pallets before loading into container
Carbon Black Type N220,N330,N550,Domestic carbon black or Imported carbon black, HAF type or P type, normal carbon black or pigment carbon black Carrier Resin PE, PP, ABS, EVA,PVC Carrier Resin Type Virgin or Recycled Materials Effect Good dispersion, high blackness, high brightness 25KG PP OR PAPER BAG
Application item PET fiber PA fiber PP fiber Carrier PET PA6 PP Appearance cylindrical granules cylindrical granules cylindrical granules Particle size /mm ¦µ(3.00.5) L(3.00.3) ¦µ(2.70.5) L(3.00.3) ¦µ(3.00.5) L(3.00.3) Moisture ¡Ü0.5% ¡Ü0.8% ¡Ü0.3% Chromatism [1] 4 class 4 class 4 class Melt point 2605¡æ 2255¡æ 1655¡æ Relative viscosity 0.50.1 2.10.10 N/A Heat stability [2] 300¡æ 280¡æ 280¡æ DF data / bar /g¡¤cm2 ¡Ü1 ¡Ü1.5 ¡Ü1 25Kg/bag
Filler Masterbatch is compounded of Calcium carbonate, polymer resin and other additives. It is used very popular in the industry of plastic (blow film, blow molding, injection molding, coated, laminate, raffia,… ) to reduce the production cost and improve some properties of final products. Masterbatch will be packed into PP/PE bag (25kg/bag) with label that following inquiry of customers. – Fullfilled bags will be put over pallets before loading into container.
Filler Masterbatch is compounded of Calcium carbonate, polymer resin and other additives. It is used very popular in the industry of plastic (blow film, blow molding, injection molding, coated, laminate, raffia,… ) to reduce the production cost and improve some properties of final products. Masterbatch will be packed into PP/PE bag (25kg/bag) with label that following inquiry of customers. – Fullfilled bags will be put over pallets before loading into container.
White Masterbatch is compounded of titanium dioxide pigment, polymer resin and other additives. It is used to coloring the final plastic products to white and opacity. Application: Film blowing, injection, yarn, raffia,... – Masterbatch will be packed into PP/PE bag (25kg/bag) with label that following inquiry of customers. – Fullfilled bags will be put over pallets before loading into container.
Filler Masterbatch is compounded of Calcium carbonate, polymer resin and other additives. It is used very popular in the industry of plastic (blow film, blow molding, injection molding, coated, laminate, raffia,… ) to reduce the production cost and improve some properties of final products. – Masterbatch will be packed into PP/PE bag (25kg/bag) with label that following inquiry of customers. – Fullfilled bags will be put over pallets before loading into container.
HAF 330 %42 CARBON BLACK,lOW Density Polyethelene Can be used 230 C,LDPE-HDPE-PP-ABS-PVC 25 KG Laminated Sacks ,
Poly Tuff reduce your finished product cost.
Calmast (cm3) is a compound of calcium carbonate (caco3) base, polypropylene (pp) virginand additives (processing aid, dispersion agent). Cm used as a filling, cost reduction, increase capacity and maintain performance. Cm350 is compatible with pp, ps, abs, etc carrier resin for production technology: injection, blow molding, extrusion, threading yarn, etc. Adding rate: 5-50%wt depending on the specific product and it is adjusted based on specific production technology or quality requirement. Packaging 25kg/ppbag Loading 25mt/20dc
Calmast(cm) is a compound of calcium carbonate (caco3) base, polyethylene (pe) virgin and additives (processing aid, dispersion agent). Caco3 mb used as a filling, cost reduction, increase capacity and maintain performance. Cm170 is compatible with pe, pp, ps, abs, etc carrier resin for production technology: blown film, injection, blow molding, extrusion, threading yarn, etc. Adding rate: 5-60%wt depending on the specific product and it is adjusted based on specific production technology or quality requirement. Packaging 25kg/ppbag Loading 25mt/20dc
Calmast (cm3) is a compound of calcium carbonate (caco3) base, polypropylene (pp) virginand additives (processing aid, dispersion agent). Cm used as a filling, cost reduction, increase capacity and maintain performance. Cm350 is compatible with pp, ps, abs, etc carrier resin for production technology: injection, blow molding, extrusion, threading yarn, etc. Adding rate: 5-50%wt depending on the specific product and it is adjusted based on specific production technology or quality requirement. Packaging 25kg/ppbag Loading 25mt/20dc
Colmast(cw) are concentrated of titanium dioxide (tio2), polyethylene (pe) virgin and additives (processing aid, dispersion agent). Titanium dioxide (tio2) used in all colmast-white is of the rutile coated, which ensure high opacity, colouring strength, dispersibility and excellent uv-stability. Cw160 is used to create ceramic or pearl white color of end products. Cw160 is compatible with pe, pp, ps, abs, etc carrier resin for production technology : blown film, injection, blow molding, extrusion, etc Adding rate : 1-9%wt depending on the specific product and it is adjusted based on specific production technology or quality requirement. Packaging 25kgs/pp bag Loading 25mt/20dc
Colmast(cb) is a compound of carbon black base, polyethylene (pe) virgin and additives (processing aid, dispersion agent). Carbon black used in black masterbatch, which ensure high opacity, colouring strength, dispersibility. Cb130 is used to create black color of end products. Cb is compatible with pe, pp, ps, abs, etc carrier resin for production technology : blown film, injection, blow molding, extrusion, etc. Adding rate : 1-9%wt depending on the specific product and it is adjusted based on specific production technology or quality requirement. Packaging 25kg/ppbag Loading 25mt/20dc
Applicable materials: PC, PC/ABS, PA, PP, ABS and other materials, the addition amount is 10-15%, the surface resistance is 10 to the 7th power to 10 to the 10th power
Different colors can be customized, suitable for high-temperature nylon, PC, ABS, PC/ABS and other resins.
CALMAST MF530 is a perfect choice to help plastic product manufacturers optimize costs and improve mechanical and physical properties such as heat resistance, surface improvement, increase Impact Strength and tensile strength of the finished product. Especially increase the stability in the processing of the final product. VISIT OUR WEBSITE FOR DETAILED DOCUMENTS Technical Data Sheet (TDS) Safety Data Sheet (SDS) Regulatory Data Sheet (RDS) Food Contact Declaration (FCD) Certificate REACH SVHC Certificate PaHs Certificate FDA Certificate Eu no 10 GENERAL INTRODUCTION CALMAST MF530 from ADC PLASTIC is produced with the following mixing formula: Primary Plastic Resins (PP) + Filler Material (CaCO3 Powder) + Processing aid additives (Dispersion aid, Lubricant, ...) CALMAST MF530 is a perfect choice to help plastic product manufacturers optimize costs and improve mechanical and physical properties such as heat resistance, surface improvement, increase Impact Strength and tensile strength of the finished product. Especially increase the stability in the processing of the final product. Some common applications of MF530 (PP Calcium Carbonate Filler Masterbatch) for Injection Moulding include plastic bottles, plastic household: cups, bowls, chopsticks, buckets, pots, ... ABOUT ADC PLASTIC ADC PLASTIC is the first manufacturer in Vietnam to pioneer the field of Plastic Masterbatch with nearly 20 years of experience in producing and exporting CaCO3 Filler and White Masterbatch. Currently, ADC PLASTIC owns a factory of 15,000 m2 with a total capacity of more than 460,000 Tons/year. We are a strategic and reliable partner of thousands of enterprises in Vietnam as well as around the world in Europe, Asia, Middle East, America, ... ADC PLASTIC provides customized CaCO3 Filler Masterbatch products that meet all customer requirements for QUALITY - QUANTITY - DELIVERY TIME to help plastic enterprises improving performance, optimizing prodution costs.
COLMAST CW1350 is a perfect choice because of the outstanding advantages and the combination with different types of Primary Plastic Resins (PP, PE, ABS, ...), White Masterbatch is increasingly widely applied in woven bags, injection molding of plastic products, ... VISIT OUR WEBSITE FOR DETAILED DOCUMENTS Technical Data Sheet (TDS) Safety Data Sheet (SDS) Regulatory Data Sheet (RDS) Food Contact Declaration (FCD) Certificate REACH SVHC Certificate PaHs Certificate FDA Certificate Eu no 10 GENERAL INTRODUCTION COLMAST CW1350 from ADC PLASTIC is produced with the following mixing formula: Primary Plastic Resins (PE) + Pigment (TiO2) + Processing aid additives (Dispersion aid, Lubricant, ...) Because White Masterbatch CW1350 contains TiO2 as an ingredient that works effectively in scattering light, contributing to creating high opacity for the final product, and TiO2 can also absorb UV rays, it can help maintain the durability of the final product even in harsh weather conditions. COLMAST CW1350 is a perfect choice because of the outstanding advantages and the combination with different types of Primary Plastic Resins (PP, PE, ABS, ...), White Masterbatch is increasingly widely applied in woven bags, injection molding of plastic products, ... ABOUT ADC PLASTIC ADC PLASTIC is the first manufacturer in Vietnam to pioneer the field of Plastic Masterbatch with nearly 20 years of experience in producing and exporting CaCO3 Filler and White Masterbatch. Currently, ADC PLASTIC owns a factory of 15,000 m2 with a total capacity of more than 460,000 Tons/year. We are a strategic and reliable partner of thousands of enterprises in Vietnam as well as around the world in Europe, Asia, Middle East, America, ... ADC PLASTIC provides customized CaCO3 Filler Masterbatch products that meet all customer requirements for QUALITY - QUANTITY - DELIVERY TIME to help plastic enterprises improving performance, optimizing prodution costs.