Find Verified Marine Equipments Spare Parts Suppliers, Manufacturers and Wholesalers

Type: 24MM 1M
Material: polyethylene
Two horses with V eyes, shackles,
Safety negative Heda 30 tons / roots,
Conform MSC1327 rules
CCS certificate provided

Pneumatic Rubber Fenders Introduction
Pneumatic fenders is a leading anti-collision device for marine application in the world today. This compressed air rubber fender is used as a protective medium. Therefore, pneumatic rubber fenders serves as a protective medium against collision when ship-to-ship contact (STS) and ship-to-berthing (STB). Pneumatic fenders has the advantages of massive energy absorption with low unit surface pressure acted upon the ship. So penumatic fenders has become an ideal ship protection medium used extensively by large tankers, LPG vessels, ocean platforms, large docks, harbor and wharfs.

ZB1808-22 7/8(22mm)
Name
Rectangular Rail Base
Material
stainless steel 316
Suface finish
Mirror polishing
MOQ
1 PC
Technqiue
investment casting
Packing
opp bag+ carton
Speficication of 90 degree Rectangular Rail Base


This Rectangular Rail Base is produced via investment casting in stainless steel 316 material , which is solid and durable and can
standard in harsh environment.
The surface is mirror polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance .

2 sizes are available for you 7/8 and 1 inch

If there is no size you need, please feel free to let us know.
a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details

ZB1804-22 7/8 (22mm)
Name
Round Rail Base
Material
stainless steel 316
Suface finish
Mirror polishing
MOQ
1 PC
Technqiue
investment casting
Packing
opp bag+ carton
Speficication of 90 degree Round Rail Base


This Round Rail Base is produced via investment casting in stainless steel 316 material , which is solid and durable and can standard in harsh environment.
The surface is mirror polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance .

2 sizes are available for you 7/8 and 1 inch

If there is no size you need, please feel free to let us know.
is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.

ZB1602-4
Name Stainless Steel wire eye strap
Material stainless steel 316
Suface finish high polishing
MOQ 1 PC
Technqiue investment casting
Packing bubble bag+ carton
Speficication of Stainless Steel wire eye strap

Stainless Steel wire eye strap made of stainless steel 316 ,It's durable and strong materal for tough saltwater environment.
This Stainless Steel wire eye strap is casted in stainless steel 316 material by investment casting, which is solid and durable.
5 size available ,

a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.


Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details

Model No.: ZB1204-19

Name

stainless steel fishing rod holder

Material stainless steel

Suface finish high polishing

MOQ 1 PC

Technqiue machining + casting + polishing

Packing bubble bag+ carton

Speficication of SS fishing rod holder


This fishing rod holder is made in stainless steel 316 material by investment casting, which is solid and durable

The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance .

This bolt can fix the fishing rod holder tightly

is well packed in a box (115x60x245mm )

pass our inspection before shipping to you to make sure you received each single pc is in good condition.

a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.


Most of them can be supplied from stock. Low MOQ is acceptable.

Boat Accessories
Stainless steel 304 mirror polished cup holder for boat basketball holder

Preferably stainless steel material, seiko manufacturing, corrosion resistance, no rust, durable.

Surface for high precision electrolytic polishing treatment, precision brightness polishing degree is higher, not only can effectively rust prevention and corrosion, more high-end atmosphere.

Full solid core design, real material, durable.

Rigorous process, each process is strictly in accordance with the process standards, professional quality inspection, layer upon layer check.

Color: Orange,yellow, or customized colors like red, blue, green, black, etc.
Material: PE shell with PU foam inside, galvanized or stainless steel fasteners.
Cusomized Design: Available.

Dredging pipefloat are made from high wear resistance PE by rotational molding technology. One complete dredging pipefloat consists of two halves filled with PU foam which are connected by galvanized bolts, nuts and washers. The reasonable structure makes the dredging pipefloat perform well in tough dredging condition.

Mooring Buoy
A Mooring Buoy system consists of multiple steel buoys. The exact configuration depends on water depth, field requirements and environmental conditions. Typically it is a pattern of four to eight mooring points used to moor tankers. Each point consists of a rigid buoy moored to the seabed by a chain and an anchor. The prime purpose of each buoy is to act as an anchoring point for the tanker to berth. The buoys are moored to the seabed, therefore, the tanker berths without use of its own anchors.


Each buoy has a chain hawser assembly through the center of the buoy unit, terminating in a chain stopper on deck. The buoys are normally fitted with double quick release hooks to disconnect quickly from the tanker. Hawsers are connected to the bow or stern of the tanker on one end and to the quick release hook of the buoy on the other end.


After mooring to the buoys, the tanker may start (off)loading by connecting a subsea hose string to the ships manifold. The other end of the hose string connects to the Pipe Line End Manifold (PLEM), fixed to the seabed or any other pipeline transferring the product to or from any installation located onshore or offshore. Should the tanker leave the berth, the hose string will be laid down on the seabed, to be picked up again when the next tanker arrives.


Anchor arrangement - An anchor arrangement is deployed to connect the buoy to the seabed. For each buoy, dynamic behavior calculations predict the behavior of the buoy for various wind, wave and current conditions. These calculations determine the optimum anchor leg arrangement, and the size of the various anchor leg components.

A.Product Overview:
1.The hose loop is used in oil field cementing, acid fracturing, etc;
2.The hose loop is assembled by swivel joint, hammer union and pup joint, can be swiveled in three directions flexibly;
3.The hose loop can be used in discharge pup joint, transportation pup joint, well testing pup join, well cementing pup joint, and transportation liquid flow under high pressure environment;
4.The hose loop can be matched with many kinds of swivel joints;
5.The hose loop has specifications of 2in, 3in, 4in and is adaptive to working under 42MPa(6000psi), 70MPa (10000psi), 105MPa(15000psi);
6.Hummer union can be connected or disconnected with pup joint. The disconnection is suitable for low pressure pup joint and connection is suitable for high pressure pup joint;
7.We are able to supply hose loop in each specification, pressure, length (according to expanded size) according to users needs.

B.Design Features:
1.The swivel joint attached to hose loop is characterized by flexibility, impact resistance, vibration resistance, big rate of flow, etc.
2.The hose loop has fine sealing performance;
3.The hose loop is connected by union, which is simple to assemble and disassemble, crush resistance, and high sealing performance. It has the advantages of easy foldability, convenient transportation and storage;
4.We are supplying H2S proof hose loop under acid environment;
5.The thread joint conforms to international specifications and can be exchanged to like products internationally.
Get more.

Model No.:ZB1701-4
Speficication of air vent cover
The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion
resistance .

This air vent cover is produced in stainless steel material , which is solid and durable

2 sizes are available for you 4 inch and 5 inch.



Stainless steel 316 5' inch marine round louvered vent for boat yacht
5 Round Louvered Air Vent
Easy to use and install.
316 stainless steel, corrosion resistance and durable.
Great for related vents in boats, marine, yacht, caravan, home

ZB1406-22 7/8 inch
Name Bimini Top Jaw Slide with bolt
Material stainless steel 316
Suface finish high polishing
MOQ 1 PC
Technqiue investment casting
Packing bubble bag+ carton
Speficication of SS Bimini Top Jaw Slide with bolt


This Jaw Slide is casted in stainless steel 316 material by investment casting, which is solid and durable

The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance .

The screw here make the connection with pipe tightly.
Two sizes available , which can fit tube 7/8 in or 1 inch.

is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details