Yamaha used boat engine. 2/4 stroke 15 ~ 250Hp
feel free to contact us by email or others Product Description 2019 EVINRUDE 30 HP E30DGTL OUTBOARD MOTOR Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 2.992 x 2.5 in. (76 x 64 mm) Displacement: 35.2 cu.in. (577cc) Starting: Electric and Rope Dimensions Shaft Length: 20 in. (508 mm) Weight: 187 lb. (85 kg) General Trim Method: Power Trim and Tilt Propshaft Horsepower: 30 hp Full Throttle Operating Range: 5500-6000 rpm Gear Ratio / Shift: 2.15:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 56 Amps Total / 15 Amps Net Dedicated Steering: Tiller (Remote Available) Warranty: 3-Year, Non-Declining Features Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four--stroke outboard. Extend the life of your outboard and your boating season. More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run. Specifications Engine Model: E30DGTL Graphite Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke - in (mm): 2.992 x 2.5 (76 x 64) Displacement - cu in (cc) L: 35.2 (577) Gear Ratio: 2.15:1 Full Throttle RPM Range: 5500-6000 RPM Weight - lbs (kg): 187 (85) Starting: Electric and Rope Controls: Mechanical Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator Output*: 56 Amps Total / 15 Amps Net Dedicated Steering: Tiller (Remote Available) Trim Method: Power Trim and Tilt Trim Range: -4to 16 Tilt Range: 65 Shaft Length - in (mm): 20 (508) Lubrication: Multi-Point Targeted Oiling Oil Tank Capacity - gal (L): 1.7 (1.6) Recommended Oil: Evinrude / Johnson XD-100 Oil Recommended Fuel: 87 Octane Warranty: 3-Year, Non-Declining Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
feel free to contact us by email or others Product Description 2019 YAMAHA 50 HP F50LB OUTBOARD MOTOR Specifications Engine Type: Yamaha F50LB Four Stroke Horsepower: 50 hp Cylinders: 4 cyl Shaft Length: 20" Steering: Remote Mech Starter: Electric Weight: 247 lbs Full Throttle Range: 5000 - 6000 rpm Displacement: 996cc Induction System: EFI Warranty: 3 years
Turn up the torque Exciting and dynamic styling will give a distinctive Yamaha look to your boat, with industry leading concepts and technologies bursting at the seams. The groundbreaking Direct Fuel Injection improves efficiency from two aspects, boosting the engines performance on the water and reducing fuel consumption. Integrated Digital Electronic Steering delivers smooth, more precise handling on the wheel yet maintains the sense of connection with the water, it also links with Yamaha's Helm Master EX compatibility for greater control and supreme confidence. Reverse thrust enhances manoeuvrability in confined spaces, keeping you cool under pressure.
Yamaha Outboard Motor Information: Model: 225 HP Four Stroke V6 4.2L Offshore Model Number: LF225XCA Series: Four Stroke V6 4.2L Offshore HP: 225 Engine Type: V6 (60) Displacement: 4.2L (254 ci) Bore x Stroke: 96 x 96mm (3.78 x 3.78 in) Prop Shaft Horsepower: 225hp at 5500 rpm (F/LF225) Compression Ratio: 10.3 Fuel/Induction System: DOHC Fuel Injection VCT Exhaust: Through Propeller Intake: Single Throttle Valve Ignition System: TCI Micro Computer Spark Plug: LFR6A-11-00-000 Alternator Output: 70 Amp Starting System: Electric Lubrication: Wet Sump Engine Oil Capacity: 6.3L/6.0L w/with filter Full Throttle RPM Range: 5000 - 6000 Cooling: Water/Thermostatic Control Recommended Engine Oil: Yamalube 4M (See owner's manual) Recommended Fuel: Regular Unleaded (Minimum Pump Octane 87) Recommended Fuel: Filtration Yamaha 10-Micron Fuel/Water Separating Filter (external) Ethanol Blend Limit: 10% Maximum Gear Ratio: (21 Gear Shift: Forward, Neutral, Reverse Shaft Length: 25 Degree of Tilt: 67 Degree of Trim: -3 through 16 C.A.R.B. Rating: 3-Star Dry Weight: 562 lbs Mounting Centers: 28.6 Steering Angle (maximum): 32 from center, either direction Rotation: Counter (Left)
Yamaha Outboard Motor Information: Model: 350 HP Four Stroke V8 5.3L F350 Model Number: LF350XCA Series: Four Stroke V8 5.3L F350 HP: 350 Engine Type: V8 Displacement: 325.3ci (5330 cc) Bore x Stroke: 94 x 96mm (3.70 x 3.78 in.) Prop Shaft Horsepower: 350 5500 rpm's Cylinder Heads: DOHC / 32 valve with Variable Camshaft Timing (VCT) Compression Ratio: 9.6 RPM Range: 5000-6000 Fuel/Induction System: Sequential multi-point electronic fuel injection Fuel Type: Unleaded gasoline (minimum pump octane 89) Exhaust: In-Bank dual exhaust with Power Surge Chambers Intake: Single electronic throttle valve with 8 individual long intake tracks Ignition System: TCI, 32-bit ECM with integrated coil-in-cap ignition design Spark Plug: NGK LFR6A-11 Starting System: Electric Lubrication: Wet sump Oil Capacity: 8.2 quarts Recommended Engine Oil: Yamalube 4-M FC-W 10W-30 or 20W-40 Gear Ratio: 1.73 Shaft Length: 25 in Controls: Command Link Digital Electronic Controls Multiple Outboard Synchronization: Auto sync throttle control with twin and triple applications Trolling Throttle Adjustment: 50 rpm increments (600 - 1000 rpm range) via Command Link System Mounting Centers: 28.5 in (same as F250) Mounting Bolt Pattern: 6 bolts (same as F250 plus two additional upper bolts) Steering Angle (maximum): 32 from center, either direction Weight: 804 lb C.A.R.B. Rating: 3-Star Command Link Guages or Command Link Plus Displays: Required Command Link or Command Link Plus Digital Controls: Required Engine Sensing Warning System: Standard Engine Stop Switch Lanyard: Standard 3 Year Limited Warranty: Standard Enhanced Ultimate Corrosion Protection System (UCP-ll): Standard Electronic Fuel Injection: Standard External Tilt Switch: Standard High Output Alternator: Standard Micro-Computer Ignition System: Standard Multi-Charge Monitoring System: Standard Power Trim and Tilt: Yes Sure-Seal Tri Latch: Standard Thermostatic Cooling System: Standard Saltwater Series XL, XL4, or XL4-HP Prop: Required Remote Steering: Standard Freshwater Flush: Standard Rotation: Left
We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them, both 2 strokes and 4 strokes motors. Our prices far cheap We Are Suppliers Of High Quality Yamaha Outboard Engines Both Used And New. We Have A Wide Range Of 350hp, 300hp, 250hp, 200hp, 150hp, 100hp 75hp, 60hp 40hp And More We Also Have V Max Sho, Jet Drive/high Thrust, For Stroke, Xto Offshore Our Outboards Includes Mercury Verado Yamaha Outboards Yamaha Fourstroke Outboards Honda Suzuki And Many More
Advantage 1.Low fuel consumption 2.Ultra strong anticorrosion 3.Integrated CDI igniting system 4.New technology,lighter weight 5.Long service life 6.Convenient maintenance 7.High efficiency 8.Low noise 9.Reliable operation 10.Good starting and running performance
Steam Engine Boiler Type
All kinds of Marine Yanmar Recondition gensets & propulsion engines.
Recondition MAK marine engine
Recondition Cummins Engine. Model : KTA 50, KTA 38, KTA 19, NTA 855 etc.
Name: Recondition Caterpillar Engine Model: 3516, 3512, 3508, 3606, 3406 etc.
Various Kinds of Recondition Marine Wartsila Engine.
Various kinds of Recondition MAN Engine.
Marine Oil arsec Marine Oil exhibits a high level of detergency and disperancy due to its high TBN and sulphate ash content. arcec Marine Oil is formulated with high quality base in conjunction with latest additive technology. It is highly recommended for marine and industrial diesel engines including turbo charged models operating in all types of conditions.
Available sizes: 80mm, 100mm, 125mm, 150mm, 160mm, 200mm, 250mm Material : Metal valves body is manufactured from SPCC steel, with adjustable core. body thickness : 0.6mm or 0.8mm Mounting rings is manufactured from DX53D+Z80 with thickness 0.6mm. Mounting ring for clamping the mounting frame on tile ceiling plates Powder coated, standard color white ,RAL 9010 or RAL9016. The valve body has a gasket, made of celluar plastic and the control disc,with screw spindle Our advantages Established in 1997 & located in Yuyao Ningbo China, Yuyao Jingqiao Hardware Factory (also names as Ningbo Aier Ventilation Equipment Co., Ltd) has been a leading manufacturer of HVAC Accessories & Custom Metal Stamping Parts for over 20 years Hydraulic Press Production Line Progressive Die Pressing Production Line Robot Arm Transfer Production Line Fully Automatic Powder Coating Line In-house Tooling Workshop Assembling Lines · Competitive Pricing · Strict Quality Control · Fast & Stable Delivery Time · Comprehensive Range · Strong R&D Support Excellent Customer Service
Specification Model: qty-08qty-15 qty-15f-4kgqty-15f-10kg qty-20qty-20f-10kgqty-25qty-25f-10kg Operating fluid:air orlpg Joint pipe bore:g1/4g1/2 g3/4g1 Range of adjustable pressure0.05-1.0mpaor0.05-0.4mpa Max.Adjustable pressure : 1.0mpaor0.4mpa Operating temperature range : 5~80
Specification: Model: afr1500 afr2000 bfr2000 bfr3000 bfr4000 Operating fluid: air Joint pipe bore: g1/8 g1/4 g1/4 g3/8 g1/2 Filter eliment roughness: 40î¼ Ensured pressure resistance: 1.5mpa Max. Adjustable pressure: 0.95mpa Operating temperature range: 5~60 Capacity of filter cup: 15cc(afr); 60cc(bfr) Range of adjustable pressure: 0.05~0.85mpa Weight : 0.26kg(afr); 0.4kg(bfr) Body material: aluminum die-casting forming Container cup material: pe Protective cup cover material: (afr); iron(bfr)
Specification: Model : ac1500ac2000bc2000bc3000bc4000 Operating fluid :air Joint pipe bore :g1/8 g1/4 g1/4 g3/8 g1/2 Filter eliment roughness :40 Ensured pressure resistance :1.5mpa Max. Adjustable pressure:0.95mpa Operating temperature range:5~60â?? Suggested lube :isovg32 or same grade oil Capacity of oil feed cup :25cc(ac);90cc(bc) Capacity of filter cup :15cc(ac);60cc(bc) Range of adjustable pressure :0.05~0.85mpa Weight :0.7kg(ac); 0.9kg(bc) Body material: aluminum die-casting forming Container cup material :pe Protective cup cover material:no(ac);iron(bc) Componsing elements:filter:af1500af2000bf2000bf3000bf4000 Regulator:ar1500ar2000br2000br3000br4000 Lubricator:al1500al2000bl2000bl3000bl4000
