Product specifications: Mn between 40 to 46% of Mn.
OWN PRODUCTION
The Central Crushing Unit is where the manganese ore is mined, crushed and
benefitted.
Here the material passes through a technological control of quality where the
ore is parceled and stored according to content concentration and granulometry.
After the extraction, crushing, processing and quality control procedures, the ore
is ready to start loading and start the logistics process from the crushing plant to
the regulatory storage (lung).
Manganese ore Lump
Mn 30% up to 50% Max
SIO2 5 % Min
Fe 10% Max up to
AI2O3 10% Max up to 2 Min
p 0,05% Max
S 0,05% Max
Moisture 7 % Max
Size 10-100 mm 90%
Packing Bulk in the container or Big bags according to the demand of the buyer
Payment Term is LC At Sight or DLC
Manganese ore Lump (Nigeria, Zambia or Turkey Origin) We have three county operations.
Mn 30% up to 58% Max
SIO2 45% Max up to 3% Min
Fe 15% Max up to 3% Min
AI2O3 10% Max up to 2 Min
p 0,12% Max up to 0,05%
S 0,12% Max up to 0,05%
Moisture 5% Max
Size 10-200 mm 90%
Packing Bulk in container or Big bags according to the demand of the buyer
Manganese Ore 40% Mn per MT BASE up to 45 % grade.
GUARANTEED SPECIFICATIONS: SiO2, < 15% Max. < 12,35 %; Al2O3, < 6% Max. < 4,70 %
Fe, < 5% Max. < 2,35 %; S, < 0.10% Max. < 0,05 %; P, < 0.10% Max. < 1380 ppm.
MOISTURE: < 8% Max. PAYMENT TERMS: Letter of Credit issued by a Top 20 World Bank,
Irrevocable, at sight from B/L date, (To define both parts). INCOTERMS 2.020: FOB-Port of Ilo, Moquegua, Per�º. PORT INFORMATION: Pier Draft: 8 mts. Maximum displacement vessels in port accepted: 35.000 MT. Bulk carrier. Port warehouse: Small capacity. Must be loaded from outside warehouse, mine charge cost. Loading method: Box Loading. Loading ratio: 6.000 MT per day. FOB-Price= US$5DMT/U x (Mn% Average). Mn% Average = 42%.
Electrolytic manganese is in high purity,it is used to increase the hardness of metal materials,the most widely used is in manganese copper alloy,manganese aluminum alloy,200 series stainless steel, the manganese can improve the strength, toughness, wear resistance and corrosion resistance of these alloys.
We can supply all grade
We have good relationship with Egypt miner, and can supply Manganese ore directly from Miner with good price.
1.Commodity:
Egyptian Manganese Ore Lumps
2.Quantity:
2000-5000MT Per Month
3.Specifications
Mn : 32% Min.
Fe : 20% Max.
Sio2 : 8% Max.
Al2O3: 5% Max.
P : 0.13% Max.
S : 0.2 - 0.4 %
Moisture Content :0.6% Max
Grain Size: 5 mm - 400 mm : 80%
Also can supply low grade Manganese Ore with Mn 22% min
COMMODITY: Manganese Ore
COUNTRY OF ORIGIN: Brazil
PORT OF LOADING AND UNLOADING: Vila do Conde Port Brazil // Vila Do Conde Brazil
DELIVERY TERM: CFR (COST & FREIGHT) Visag Port, India as per INCOTERMS 2010 and its latest revisions.
QUANTITY: The quantity of shipment of 2,000 MT + 10 %
PACKAGE: in 20 feet containers of 27.5 MT of cargo each.
SPECIFICATIONS:
The manganese ore to be delivered under this Agreement shall reasonably conform to the typical known assays as per the below indicative specification:
The quality of the Manganese ore shall have the following chemical specifications on dry basis:
TYPICAL GUARANTEED
MN 44~46.00 % 43% MIN.
SiO² 5.07 % 10% MAX.
P 0.057 % 0.12% MAX.
S 0.02% 0.02% MAX
Fe 3% 6% MAX
Al²O³ 5% 7% MAX.
Moisture 4,610 % 5% MAX.
LOI 10.88% 12.36% MAX
Size 10 - 100 mm above 90%; 10mm below 10%LOI 10 %
Buyer has right to reject or renegotiate the price, if specification will vary from above confirmed specifications
PRICE:
The base price of the manganese ore offers to be delivered CFR will be as the following chart:
PAYMENT TERMS:
Payment agreement will be irrevocably, non-transferable and none divisible, letter of credit
MANGANESE ORE PRICE FOB VDC PORT BRAZIL
PERCENTAGE MN % BSS DMTU MT/Price
Manganese is a chemical element, designated by the chemical symbol Mn. It is found as a free element in nature (often in combination with iron) and could be found in many minerals. Manganese is the fourth most used metal in terms of tonnage, being ranked behind iron, aluminium and copper.
This is one of the alloys of iron produced by us and has a variety of uses ranging from steel products to paints and glass. Our quality control ensures that our products used to produce the end products are error free and of the best quality.
Specification : Descriptions
High Carbon Ferro Manganese Alloy : Mn: 70% to 75%
Si: Upto 1.5%
P: Upto 0.30%
C: 6% to 8%
S: Upto 0.05%
High Carbon Silico : Mn: 60% to 65%
Manganese Alloy : Si: 14% to 16%
P: Upto 0.35%
C: Upto 2%
S: Upto 0.04%
This offer is from a subsidiary of JFE Holdings, Inc. (JFE Jeiefu H�rudingusu Kabushiki-gaisha). There is no intermediary between us and the subsidiary.
If interested, end user must indicate the following:
1. Quantity(Monthly)
2. Destination
3. Use of product
Seller is willing and able to send 5-10 kg free sample to buyer to examine.
Attached are the pictures of our manganese slag, one is piled up state and the other to give rough image of its size and color.
Ferro Manganese Slag
Product specifications
Mn : 6.6 %
SiO2 : 28.5 %
CaO : 37.5 %
MgO : 10.6 %
Al2O3 : 8.9 %
Fe : 0.03 %
Size
-75mm (75mm under)
Packing
Product is usually delivered as bulk. Packing in big bags and other packaging is on request.
Origin of product
Japan
Due to Japanese safety regulation and customs procedures reasons, client/buyer must please clarify the purpose or the use of this material.
Commodity : Manganese Ore Lumpy
Origin : Indian
Min. order : 10x40' containers
Payment : L/C, FOB Indian port.
Packing : in bag in Container
Price : 700 $ per MT as CIF in Destination port
Specification : Mn : 50%+
Fe : 3 % Maximum
Phosphorus : 0.12 % Maximum
Al2O3 : 5 % typical
MgO : 10 % Maximum
CaO : 5 % Maximum
SIO2 : 8% Maximum
MnO2 : 72%+ Minimum
Moisture : 3 % Maximum
Size : 20 mm to 120 mm 90%
