Parameters Finish: Clear Gloss: N/A Application Methods: Roller / Brush Substrate: Rubber, Mango Exposure: Formulation
PRODUCT INFORMATION PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent gloss, fungus resistance and durability. USAGE For decoration and protection. Suitable for all types of interior and exterior metal and wood surfaces BENEFITS High gloss and excellent gloss retention Excellent gloss fastness Excellent durability Washable PACK SIZE 1 litre, 5 litres COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart PERFORMANCE GUIDE CHEMICAL RESISTANCE Resistant to mild chemical fumes. Special paint systems required if surface is subject to constant chemical attack HEAT RESISTANCE Generally resistant to heat up to 0c. Discolouration will occur after a prolong time if surface is constantly heated WATER RESISTANCE Resistant to normal atmospheric humidity present. Will withstand repeated washing. Not suitable for surface immerse in water THEORETICAL COVERAGE 16-18 meter2 /liter. Note: Surface coverage will alter depending on condition of surface to be paint PRE-APPLICATION SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. RECOMMENDED PAINT SYSTEM Types of Surface Undercoat (1 coat) Finish (2 coats) Wood REDWOOD white undercoat Metal SEQUOIA PROTECTIVE COATING OR NASA oxide SEQUOIA 3000 GLOSS PAINT PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint. DRYTIME Touch dry : 2 hours Hard dry/Recoat : 8 hours CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal. PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment. Blinder : Organic Alkyd Solvent : White spirit
Tufkote W8568SLM Primer
Composition Active ingredients: hydrocarbon polymer, alkyd solution and siloxane in petroleum solvent. Appearance Free flowing slightly milky liquid. Packing Available in plastic pail of 18 litres, 7 litres. Storage Store at normal room temperature away from sources of ignition. Ensure containers lid are covered lightly after use. limitations Rainshield is designed for static weather resistance and may lessen efficiency is subjected to physical abrasion. Warranty 5 years subject to terms and condition. Available in plastic pail of 18 litres, 7 litres.
Solvent paint, stoving paint, epoxy paint .
All kinds of paint.
Thermoplastic road marking paint.
Parameters Finish: Clear Gloss: N/A Application Methods: Spray Substrate: Rubber, Mango, MDF Exposure: Formulation
Parameters Finish: Clear Gloss: N/A Application Methods: Wipe Substrate: Rubber, Mango Exposure: Formulation
Parameters Finish: Clear Gloss: N/A Application Methods: Roller / Brush Substrate: Rubber, Mango Exposure: Formulation
Parameters Finish: White Gloss: N/A Application Methods: Roller / Brush Substrate: Rubber, Mango Exposure: Formulation
Parameters Finish: Clear Gloss: 80% Application Methods: Roller / Brush Substrate: Rubber, Mango Exposure: Formulation
Parameters Finish: Clear Gloss: 30% Application Methods: Roller / Brush Substrate: Rubber, Mango Exposure: Formulation
SGM uses high - performance and environmentally-friendly technology. Its water-based coating packages itself into individual capsules, allowing each to contain its own unique formula and colour. THis creates a one time multi- color spray system that is not only durable, but also effective in mirroring the authentic granite texture. Advantages: 1. One time , multicolour spray system 2. Colours and paterns can be customized 3. Resistant to stains, fungus, algaue, acid and alkali 4. Washable and easy to maintain 5. High adhesion and anti peeling/ flaking 6. Water - based and eco-friendly 7. Excellent durability against weather conditions.
Paint.
Paints.
Solvent based non-toxic liquid coating for the protection of emulsion paint against damage from rain and moisture by creating a hydrophobic protective shield over the substrate paint.
Interior, exterior coatings, wood, metal, plastic paint, water proofing compound.
Paint, gloss paint, industrial coating, textured wall paint, other paint equipments.
AUS32 (AdBlue) Specifications. Product Properties for AdBlue as per the revised ISO22241 standard. Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6). Urea Content 31.8 33.2 % by weight Density at 20C 1.0870 1.0930 g/cm Refracting Index at 20C 1.3814 1.3843 Alkalinity as NH3 0.2 % Biuret 0.3 % Aldehyde 5 mg/kg Insolubles 20 mg/kg Phosphate (PO4) 0.5 mg/kg Calcium 0.5 mg/kg Iron 0.5 mg/kg Copper 0.2 mg/kg Zinc 0.2 mg/kg Chromium 0.2 mg/kg Nickel 0.2 mg/kg Aluminium 0.5 mg/kg Magnesium 0.5 mg/kg Sodium 0.5 mg/kg Potassium 0.5 mg/kg
