We have our own home brand with SIRIM approved pancake coiled copper tubing, each coil will be 15M
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Features :- ~ Exceeds ASTM D4280, EN1463-1 of United Kingdom standard; ~ Polymethyl Methacrylate (PMMA) lens ensure highest reflectivity; ~ Economical and durable; ~ High load capacity up to 25 tons; ~ Reflect values of 279 mcd/lux; ~ Reflect range of 0 - 40 degree; ~ Weight approximate 300g; ~ Oil, heat and chemical resistant; ~ Easy to install; Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Features :- ~ ASTM D2444 standard; ~ Highest reflectivity; ~ High durability; ~ High impact resistance; ~ 90L x 100W x 73H (mm); ~ Heat resistance 62.7 - 2.5 degree Celcius; ~ Easy to install; Aaluminium road stud with Double Amber reflector market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia.
-99% Pure Aluminium Foil with high reflectivity (>0.07) & low emissivity (
Iron ore mines small-medium for JV in Malaysia. Suits miners and investors who want good return, less capital intensive. Freely exportable commodity. We have ready buyers for the iron ore you produce.
any copper scrap
ZINC plays an important role in continuous hot-dip galvanizing. Using the correctly specified grade of ZINC, continuous galvanizing grade (CGG) alloy, or master alloy is key to producing a galvanized product. ZINC Coatings on Steel One of the biggest uses of ZINC is in making protective coatings for steel. The development of the wide range of ZINC coatings arose from two happy accidents of chemistry, the relatively slow and predictable rate of atmospheric corrosion of ZINC compared with steel, and the relative positions of ZINC and iron in the electrochemical series. ZINC will corrode preferentially to give cathodic protection to iron when both are in contact in an aqueous medium. This is used to good effect to protect immersed structures such as ships’ hulls, drilling rigs and pipelines. It also means that any bare areas in a ZINC coating on steel, caused by damage or operations such as cutting or drilling, are still protected by the surrounding ZINC. Other ZINC Coatings Originally, ZINC coatings were applied by hot dip galvanizing. This involves dipping prepared steel in molten ZINC. This was done mainly with fabricated steel or with sheets of steel, many of which were profiled to produce the ubiquitous ‘corrugated iron’. The first development from this was the production of continuous strip steel with a galvanized coating. Refinements of this process today account for the greatest part of the total tonnage of steel carrying ZINC coatings. Standard Specification for ZINC Specifies the chemical requirements and other delivery conditions for 5 ZINC grades, including Special High Grade (SHG), High Grade (HG), and Prime Western Grade (PW). These grades, and scores of nonstandard variations of them, were once all that were available for use by the continuous galvanizing industry. Some are still employed in certain instances, e.g., SHG (99.990% Zn) is used to reduce the aluminum content in coating line zinc baths. The grades in this standard are also used in the general galvanizing and ZINC die-casting industries. ZINC INGOTS Application Mainly used for die-casting alloy battery industry. Widely used in Painting / Printing / Dyeing / pharmaceutical / rubber industry etc Chemical industries, ZINC and other metal alloy plating coating industry. In ZINC plating, manufacture of brass, manganese bronze, galvanized iron, dry battery; as catalyst and reducing agent. Specifications ZINC Ingot 99.995 High quality special high grade ZINC Ingots Zn (purity): 98.7%-99.995% Durability Resistant to abrasion Corrosion free Impact resistance
We supply a wide range of Copper Cathode that meet international standards and specifications.
We supply a wide range of Aluminum Ingots that meet international standards and specifications.
We supply a wide range of Aluminum Scrap that meet international standards and specifications.
We supply a wide range of Copper Scrap that meet international standards and specifications.
We are stocking good quality Aluminum Scrap for sale
We are stocking good quality Copper Cathode for sale
We are stocking good quality Aluminum Ingots for sale
We are well known Dealer and Supplier of good quality Steel Scrap, and we have available stock for sell and export
We are well known Dealer and Supplier of good quality Lead Ingots, and we have available stock for sell and export
We are well known Dealer and Supplier of good quality Zinc Ingots, and we have available stock for sell and export
We are well known Dealer and supplier of good quality Aluminum Scrap and we have stock ready for sell and export
We are well known Dealer and supplier of good quality Aluminum Ingots and we have stock ready for sell and export
