En 590 diesel, jet a1 fuel, branded perfumes, niche perfumes, budget perfumes, FMCG products, chocolates.
Building material, paints and waterproofing products.Shipping
Chemical, construction material, agriculture products, food and beverages, medical item.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Features :- ~ 112L x 91W x 20H (mm); ~ Shank 55mm; ~ Load capacity up to 25 tons; ~ Highest reflectivity lens area 168 square millimeters; ~ High durability; ~ High impact resistance; ~ Grove bottom for better grip and easy installation; Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
Construction materials.Ship brokering
Reinforcing Bars .
Fibre cement board for partition, false ceiling, drywall, roofing, soffits, eaves lining, cladding applications.
Tensile membrane structures.
Di Calcium Phosphate(DCP)
Barium Nitrate
Mono Calcium Phosphate (MCP) : Grade: Food Content: 22%P Properties: Powder/ Crystal MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 172 Mono Calcium Phosphate(MCP) Molecular formula: Ca(H2PO4)2. H2O Molecular weight: 252.07 Standard executed: HG/2861-1997 CAS Number: 7758-23-8 Properties: White crystal powder, Easily soluble in hydrochloric acid, nitric acid, soluble in cool water, almost insoluble in alcohol. It loses crystal water at 109 º C and decomposes to calcium metaphosphate at 203 C. Uses: Since most of aquatic animals take in feed phosphate through rectum. It is necessary to give it soluble phosphorus form. The biological availability of Monocalcium Phosphate is much higher than other feed phosphates such as Dicalcium Phosphate, Bone Powder, Tricalcium Phosphate. It is auxiliary feed for aquatic animals, poultry and livestock. It can promote feed digestion, put on animals' weight, and cure diseases such as rickets, steomalacid etc. Packing and storage : In 25kg, 50kg net bags. Store at a cool, dry and well ventilated place.
Mono Potassium Phosp-hate(MKP) : Grade: Tech Content: 99% Properties: Crystal MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 140 Mono Potassium Phosphate(MKP) Molecular formula: KH2PO4 Molecular weight: 136.09 Standard executed: HG2321-1992(technical grade) Q74465717-12(food grade) CAS Number: 7778-77-0 Properties: White or colorless crystal, easily soluble in water, relative density at 2.338 g/cm3, melting point at 252.6 C, and pH value of 1% solution is 4.5. Uses: Used to manufacture metaphosphate in medical or food industry. Used as a high effective K and P compound fertilizer. It contains totally 86% fertilizer elements, used as a basic raw material for N, P and K compound fertilizer. Packing And Storage: In 25kg, 50kg, net bags, store at a cool, dry and well ventilated place.
Sodium Tripolyphosphate (STPP) : Grade: Tech Content: 94% Properties: Powder MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 187 Sodium Tripolyphosphate(STPP) Molecular formula: Na5P3O10 Molecular Weight: 367.86 Standard executed: GB/T9983-2004(technical grade) QB1034-91(food grade) CAS Number: 7758-29-4 Properties: White powder; Melting point 622ºC; Easily soluble in water; It has got salient chelating capacity to ions of Ca and Mg etc. And can soften hard water to make suspension solution become into clear solution; It has got weak alkalinity but no corrosiveness. It is a surfactant, and has got outstanding emulsification to lubricants and fat. It has different bulk density, I. E. Low density 0.35-0.5g/cm3, medium density 0.51-0.65g/cm3 and high density 0.66-0.9g/cm3. This product has two crystalline forms, namely Type I (high temperature type) and Type II (low temperature type). The chemical properties of the two types are the same, and the difference between them lies in the thermo stability, hygroscopic, solubility and hydration heat when dissolving. Uses: Used as one of the main auxiliaries for synthetic detergent, synergist for soap; Water softener, tanning agent for leather making, auxiliary for dyeing; As an effective dispersion agent for suspension solutions of coatings, kaolin, magnesium oxide, calcium carbonate and drilling mud etc.; As an oil contamination resistance agent in paper production. In foodstuff industry it is used as quality improver in the process of canned food, fruit juice drinks, foodstuffs from milk or soybeans. It may tender the meat in canned ham and soften the skin of horse bean in canned horse bean. It may also serves as a softener or densifier in foodstuff industry. Packing And Storage: In 25Kg/50 Kg net bag, store at a cool, dry and well ventilated place.
Cadmium Nitrate : Grade: Tech Content: 98% Properties: Crystal MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 137 Molecular formula: CD(NO3)2 4H2O Molecular weight: 308.482 Physicochemical Properties: Cadmium nitrate tetrahydrate is a colorless rhombic system crystal, Specific Density 2.45, Melting Point 59.5 C. The tetrahydrate will convert into anhydride when is put into a drier or heated to 70,80 C. It will emit nitrogen oxide and turn into cadmium oxide when heated as high as 360 C. The tetrahydrate are very soluble in water, and also soluble in ethanol and acetone. It exhibits hygroscopic property. Cadmium nitrate is a strong oxidizer and toxic. Applications And Usages: It is primarily used as colorant for glass and ceramics, emulsifier for photographic film and as analytical reagent. In addition, it also finds uses in preparation of other cadmium salts and cadmium oxide, as well as producing catalysts, batteries and drugs containing cadmium Packing: 25kg weaving bag with plastic liner or according to the requirements of customers.
Chromium Nitrate : Grade: Tech Content: 98% Properties: Crystal MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 165 Molecular formula:Cr(NO3)3.9H2O Molecular weight: 400.148 Physicochemical Properties: Chromium nitrates exist anhydrous variety and couples of hydrates. The anhydrous chromium nitrate is a little green powder while the common nonahydrate is a purple crystal of monoclinic system. It will be dissolved in crystal water itself at temperature of 66.3 C or boil and decompose at 125.5 C. The hydrate chromium nitrate is likely to lose some crystal water due to weathering in the air. In turn, it is subject to deliquescence. The nonahydrate chromium nitrate can be easily dissolved in water, acids, alkalis, alcohols and acetone. Applications And Usages: The major applications of chromium nitrate include preparation of other inorganic or organic chromium, catalysts and carrier materials, corrosion inhibitors and dye mordant as well as colorant in glass industry and colored glaze of ceramics Packing: Chemical pure, enterprise version I is 25kg weaving bag with plastic liner or according to the requirements of customers. Enterprise version II is 74% chromic nitrate liquid, 40kg plastic pail or according to the requirements of customers.
Cupric Nitrate : Grade: Tech Content: 99% Properties: Crystal MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 77 Molecular Formula: Cu(NO3)2 3H2O Molecular Weight: 241.60 Physicochemical Properties: Cupric nitrate has three kinds of hydrates-trihydrate, hexahydrate and nonahydrate. The trihydrate is a dark blue columnar crystal. Specific Density: 2.05, Melting Point: 114.5 C. It will be degraded into an insoluble basic salt - Cu(NO3)2l Cu(OH)2 when heated at 170 C, and then convert into copper oxide. It is apt to dissolve in water and ethanol. The aqueous solution is acidity and the hydrate is easy in moisture absorption. Cupric nitrate is a strong oxidizer which can cause burning and explosive if heated, rubbed or impacted with carbon powder, sulfur or other combustible materials. Applications and Usages: Cupric nitrate is used as catalyst, oxidizer, activating agent for luminescent powder, and photosensitive resistance materials. Packing: 25kg weaving bag with plastic liner or according to the requirements of customers Specification: HG3-931-76
Manganese Nitrate : Grade: Tech Content: 49-51% Properties: Liquid MOQ: 1FCL Packing: IBC Tank Attention: Export Tariff: Views : 145 Molecular formula:Mn(NO3)2 Molecular weight: 400.148 Physicochemical Properties: 50% concentrated manganese nitrate solution is light red or rosiness transparent liquid. Specific Density: 1.54(20 C). It can be dissolved in water and alcohols. When heated, it will separate out manganese dioxide and emit nitrogen oxide gas. Manganese nitrate hexahydrate is light-rosiness needle-liked lozenge crystal. Melting Point: 25.8 C, Boiling Point: 129.5 C, Density: 1.82(21 C). It is able to dissolve in water and alcohol and decompose into manganese dioxide when temperature ranges from 160 C to 200 C. In addition, it is subject to deliquescence. Applications and Usages: It used as raw material to prepare manganese dioxide, as phosphorizing agent in metals, colorants for ceramics as well as catalysts Packing: 35kg/200kg plastic pail or according to the requirements of customers.
Di Ammonium Phosphat-E (DAP) : Grade: Tech Content: 98% Properties: Crystal MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 526 Properties: White granular crystal, relative density at 1.619g/cm3, melting point at 155 ? , easily soluble in water, insoluble in alcohol, PH value of 1% solution is 8.0. Uses: As a fire-prevention agent for fabric, timber and paper. For food grade it is mainly used as a fermentation agent, nourishment, and so on. Used as a high effective non-chloride N, P compound fertilizer in agriculture. It contains totally 74% fertilizer elements, used as a basic raw material for N, P and K compound fertilizer.
Di Potassium Phospha-te(DKP) : Grade: Tech/Food Content: 98% Properties: Powder MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 107 Di-Potassium Phosphate(DKP) Molecular formula: K2HPO4. NH2O(n= 0, 3) Molecular weight: 228.22 (n=3) 174.17 (n=0 ) CAS Number: 7758-11-4 Properties: White powder or crystal powder, easily soluble in water, slightly soluble in alcohol. Strong absorption of moisture. When anhydrous product heated to 204 C. It will be dehydrated into tetra potassium pyrophosphate. Uses: Used in medicine and ferment industry, animalcule, Bacteria culture medium, pH buffering agents. The raw material for producing potassium pyrophosphate. Buffering agent for processing foods. Stabilizer for non-dairy coffee creamers. Packing: In 25kg, /50kg, net bag Storage: Store at a cool, dry and well ventilated place.
Mono Ammonium Phosphate (MAP) : Grade: Tech Content: 60.5%P2O5 Properties: Powder/ Crystal MOQ: 1FCL Packing: 25kg/bag Attention: Export Tariff: Views : 195 Properties: White granular crystal; relative density at 1.803g/cm3, melting point at 190? , easily soluble in water, slightly soluble in alcohol, insoluble in ketone, PH value of 1% solution is 4.5. Uses: As a fire-prevention agent for fabric, timber and paper, as well as a fire-prevention coating, and dry powder for fire extinguisher. For food grade it is mainly used as a fermentation agent, nourishment, and so on. Used as a high effective non-chloride N, P compound fertilizer in agriculture. Its total nourishment (N+P2O5) is at 73%, and may be used as a basic raw material for N, P and K compound fertilizer. Packing and storage:In 25kg, 50kg, 1000kg net bags, store at a cool, dry and well ventilated place.
